Ultrasonic Window Blind Cleaning Equipment Industrial Grade Clean Rinse Dry

What is Ultrasonic Blind Cleaning?

Ultrasonics is a method of cleaning your window blinds and shades through the use of sound waves. It is fast, gentle, efficient, and safe. No dangerous chemicals are involved in the cleaning process. Ultrasonics cleans the vanes/slats of the blinds, head rail, as well as the cords, strings and wand. Your blinds are like new again!

How does the Ultrasonic Blind and Shade Cleaning Work?

Ulatrasonic Cleaning Tank

Our ultrasonic cleaning tank creates vibrating sound waves in warm water which in turn produce microscopic bubbles that gently remove visible and microscopic dirt particles from an object. These bubbles are so small allowing every crevice and cavity to be cleaned along with dirt, stubborn stains and biological pollutants. The ultrasonic cleaning process breaks the static bond with the aid of a mild biodegradable detergent solution. The blinds are rinsed and then dried. This leaves your blinds/shades clean and spot free. Ultrasonic blind and shade cleaning does not scratch, pit or damage items the way conventional cleaning methods can.

Rinse Tank

I clean my blinds. Isn’t that good enough?

Hand dusting creates static electricity. This attracts dust, dirt and only soils the surface all over again or causes a build-up of allergens. Have you ever rubbed on the blind surface and noticed a thin layer of dust come off after you just cleaned? These small contaminants can be inhaled. Pressure washing and steam cleaning can ruin the blinds’ surface. Household cleaners can remove paint or stain the blinds. You can’t effectively clean the intricate parts of your blinds like our ultrasonic cleaning equipment.

How the System Operates:

The system operates in the following manner:

• Parts are placed into the tank using the included stainless steel basket or other holding fixture.
• Once submerged, the START button is pressed, and the cover is closed. The ultrasonic system turns on, and the filter system turns off automatically. Parts are cleaned with the CROSSFIRE ultrasonic system at this time.
• The system will automatically turn off upon completion of the cycle.
• Operators can then return when the parts are clean.
• The cover is opened and the batch of parts is placed onto the basket rest. Dripping liquids are directed back to the ultrasonic cleaning tank
• What is Ultrasonic Cleaning

• In a process termed "cavitation", micron-size bubbles form and grow due to alternating positive and negative pressure waves in a solution. The bubbles subjected to these alternating pressure waves continue to grow until they reach resonant size. Just prior to the bubble implosion, there is a tremendous amount of energy stored inside the bubble itself. Temperature inside a cavitating bubble can be extremely high, with pressures up to 500 atm. The implosion event, when it occurs near a hard surface, changes the bubble into a suction jet about one-tenth the bubble size, which travels at speeds up to 400 km/hr away from the hard surface. With the combination of pressure, temperature, and velocity, the jet frees contaminants from their bonds with the substrate. Because of the inherently small size of the jet and the relatively large energy, ultrasonic cleaning has the ability to reach into small crevices and remove entrapped soils very effectively.

  
  

  What is cavitation?

  "Cavitation" is the rapid formation and collapse of millions of tiny bubbles (or cavities) in a liquid. Cavitation is produced by the alternating high and low pressure waves generated by high frequency (ultrasonic) sound. During the low pressure phase, these bubbles grow from microscopic size until, during the high pressure phase where they are compressed and implode.

  
  

  What is Degassing?

  "Degassing" is the initial removal of gases present in the solution. Non removal or "trapped Gas" in the cleaning solution leads to gaseous cavitation where bubbles cannot effictivly form, useful cavitation occurs after gasses have been removed from the cleaning solution, leaving a vacuum in the formed bubble. When the high pressure wave hits the bubble wall, the bubble collapses; it is the energy released by this collapse that will assist a detergent in breaking the bonds between parts and their soils.

  
  

  How do I "Degas" my ultrasonic Cleaner?

  A. Once filled with water the ultrasonics should be left operating for a few minutes so that excess air is driven from the liquid. Tiny bubbles will be seen to rise to the surface but this is gaseous cavitation and not suitable for cleaning. At the end of the de-gasing period, a hissing sound and a churning of the liquid surface (cold boiling) should occur indicating vaporous cavitation.

AG SONIC technology limited Is dedicated to manufacturing systems of many types and styles which include small table-top systems, large single-tank systems for injection molds are other large parts, oil filter and metal tape washers, aerospace parts washers, multi-stage machines which include cleaning, rinsing, and drying, automation systems, and custom equipment designed specifically for your needs

Product offered:

● Household ultrasonic cleaner

● Tabletop ultrasonic cleaner (mechanical series, digital series, power adjustable series)

● Industrial standard ultrasonic cleaning machine

● Customized ultrasonic cleaning machine

Service offered:

Our customers Are Our Focus

We are committed to understanding and interpreting the complex demands of our customers. By ensuring we have complete control of all our processes, we have the flexibility to provide cleaning solutions to meet individual customer requirements and standard to delivering innovative ultrasonic cleaning solutions to meet your requirements. We forge long lasting relationships with our customers and distributors, generating superior and robust partnerships.

Our Market:

We sell ultrasonic machines to worldwide countries, and our professional team will offer you the best after-sales service. We believe after-service is as important as quality and price.