Add to Cart
Product Description
UV laser marking machine belongs to the laser marking machine series products, use 355 nm ultraviolet laser research and development, and it USES of third-order intracavity frequency doubling technique compared to the infrared laser, minimal focal sp 355 uv light, can largely reduce the material and processing of mechanical deformation heat effect is small.
Mainly be used for super fine marking, engraving, especially suitable for used in food, medicine packaging material marking, microporous, glass material of high speed divided and complex graphics on silicon wafer cutting and application field.
1. Product Introduction
Two laser heads to mark on both sides of PCB, load and unload the
plate with vacuum sucker in two feeding line.
CT:500mm×500mm PCB, marking on both side, 2 marks on each side,4
seconds per PCB.
2. Technical Feature
Two workplaces switching mode,and to mark on both sides at same
time with two laser heads.
Vacuum sucker does no demage to PCB plate.
Device size: 2300mm*1900mm*1600mm.
UV Laser Marking Machine | |||
Model | DMU-3W | ||
Ave. power | 3W | ||
Laser repetitive frequency | 1-200KHz | ||
Q switch laser pulse width | 13-80ns | ||
Laser wavelength | 355nm | ||
Beam quality M2 | <1.2 | ||
Beam divergence angle | <2mrad | ||
Marking range | 110*110 mm /175*175mm /300*300mm | ||
Line speed | 9000mm/s | ||
Min. line width | 0.01mm | ||
Repetitive accuracy | ±0.005mm | ||
Consumer power | 500W | ||
Working environment | Temperature:15℃-30℃;Humidity 30-80% No condensation | ||
Power supply | 220V 50/60Hz |
Main Features
1. Good beam quality, smaller focus spot, can reach ultra precise
marking.
2. Most materials can absorb UV laser, so that it has a wider range
of application, sufficient to processing capacity of infrared
laser.
3. Minimal heat-affected zone, no thermal effect, no material
burning issue;
4. high marking speed and effect.
5. The machine performance is stability, small size and low power
consumption.
Since UV laser beam spot is extremely small, and the processing is
minimal heat-affected zone, which can be ultra-fine marking,
special materials marking, the first choice of customers to marking
effect. UV laser no thermal effect, the result of marking and
cutting precision, smooth, steep side walls, does not produce
thermal effects, no burning problem, in addition to copper, a lot
of material is absorbing 355nm UV light, so UV laser fits most
material types.
Application
1. Medicine, such as pharmaceutical paper boxes, pharmaceutical glass packaging
2. Cosmetics industry, such as paper boxes, glass boxes, plastic boxes and so on
3. Apply to the tobacco line, such as each set cigarette to be marked on the area code
4. Food and beverage packaging,Wine gift box,Chemical products
6. Clothing accessories,Manufacturers LOGO logo text information
7. Electronic components, such as the capacitor on the standard certification mark
8. Building materials on the label PVC water pipes
Q1: I know nothing about the fiber laser marking machine, what kind of machine I should choose?Very easy to choose.
Just tell us what you want to do using this machine. And sending us a sample picture is better.
Then we will send you a perfect solutions and suggestions.
Q2: When I get this machine, but I don’t know how to use it. What should i do?
We will send you the English manual and CD video for machine using and maintaining with
machine. If you still have some doubts, we can talk by telephone or skype. Our engineer can
also be sent to your country to install or adjust machine if necessary.
Q3:if some problems happened to this machine during warranty period, what should i do?
We will supply free parts for this machine during the warranty period if machine have any
problems.We also supply free afterservice forever. So any doubts, just let us know, we will
give you solutions within 30 min.
Q4: How long is the delivery time?
For the fiber laser marking machine, the delivery time will be 2-3 days
Q5: The payment terms?
1. T/T, 30% in advance, pay the balance before delivery.
2. Through Alibaba-AliEscrow.
3. L/C
4. West Union
Q6. How about the packaging
Firstly, Packed the fiber laser machine with plastic sheet for clearing and damp proofing.
Secondly, Then put the fiber laser machine in the plywood case for safety and clashing.
Thirdly, Transport the plywood case into the container.
1. 24hours Technical support by Email or Calling.
2. English manual and CD video for machine using and maintaining.
3. Hardware: 1 years for machine,
Software: Whole life on update for free.
4.Maintenance and technological support: Whole life.