3.96mm VH PCB Connectors
Brand Name:ANYO
Model Number:VH
Minimum Order Quantity:1000pcs
Delivery Time:8-10 work days
Payment Terms:L/C, T/T
Place of Origin:CHINA
Contact Now
Add to Cart
Site Member
Location:
Ningbo Zhejiang China
Address:
ROOM 2204, NO.98， TIANGAO ALLEY, SOUTH BUSINESS DISTRICT, YINZHOU, 315194, NINGBO, CHINA
Supplier`s last login times:
within 2 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
3.96mm Crimp connector, XH type terminal and wire to board connectors
Description:
The VH Connector range is a Wire to Board 3.96 mm pitch disconnectable crimp system. The design of these VH Connectors includes an unlockable friction-lock for secure contact and mounting. The large current carrying capacity of the VH Connector range enables it to be used in a wide variety of signal, power supply and output circuit applications.
Specification:
| Poles | 2~16P |
| Current rating | 7A AC,DC |
| Voltage raing | 250V AC,DC |
| Temperature range | -25℃～+85℃ |
| Contact resistance | ≤10mΩ |
| Insulation resistance | ≥1000MΩ |
| Withstand voltage | 1500VAC/minute |
| Applicable wire | AWG #22 to #18 |
| Applicable PC board thickness | 1.6mm |
Performance test:
| Item | Test condition | Requirements | ||
| 1 | Appearance | Visual by eye Light: >1.0 Lamp: 200~300Lx Space: 0.3~0.5m | 1. Plastic part:smooth and flat surface without discolor,broken,crack distortion defects is acceptable. 2.Metal part:btight and even surface without rust,oxide,fog and obvious physical damage defects is acceptable. 3.Wire:clearing surface without discolor,broken defects,indistinct words and mark is acceptable. | |
| 2 | Contact resistance | Mate connectors,measure by dry circuit. | 10mΩ MAX | |
| 3 | InsuIation Resistance | Apply 500V DC between adjacent terminal or ground. | 1000MΩ MIN | |
| 4 | Dielectric Strength | Mate connectors,apply 1500V AC for 1 minute between adjacent terminal or ground. | No Breakdown | |
| 5 | Crimping Pull Out Force | Fix the crimped terminal,apply axial pull out force on the wire at the speed rate of not more 25mm/min. | AWG.18# 80N MIN AWG.20# 50N MIN AWG.22# 40N MIN | |
| 6 | Terminal/Housing Retention Force | Apply axial pull out force at the speed rate of not more 25mm/min on the pin assembled in the housing. | 30N MIN | |
| 7 | Pin Retention Force | Apply axial push out force at the speed rate of not more 25mm/minute on the terminal assembled in the base. | 20N MIN | |
| 8 | Solderability | Soldering time: 2±0.5 second Solder Temperature:235℃±5℃ | 90% of immersed area must show no voids,pin holes | |
| 9 | Resistance to Soldering Heat | Soldering time: 4~6 seconds Solder Temperature:260℃ | Appearance | No Damage |
| 10 | Heat Resistance | Mated connectors are exposed to a temperature of 85℃±2℃ for 96 hours. | Appearance LLCR | No Damage 20mΩ Max |
| 11 | Clod Resistance | Mated connectors are exposed to a temperature of -20℃±2℃ for 96 hours. | Appearance LLCR | No Damage 20mΩ Max |
| 12 | Temperature Rise | Carring rated current load. | Temperature Rise | 60℃ MAX |
| 13 | Humidity | Temperature:40±2℃ Relative Humidity:90%~95% Duration:96 hours | Appearance | No damage |
| Dielectric strength | 1000VAC/minute | |||
Insulation Resistance LLCR | 500MΩ MIN | |||
| 20mΩ MAX | ||||
| 14 | Temperature cycle | Mated connectors are exposed to 5 cycles of: a)-25°C±2°C 0.5hour b)+85°C±2°C 0.5hour | Appearance | No damage |
| Dielectric strength | 1000VAC/minute | |||
Insulation Resistance LLCR | 500MΩ MIN | |||
| 20mΩ MAX | ||||
| 15 | Vibration | Frequency:10~55Hz Amplitude:±1.5mm Frequency:>55~500Hz Acceleration:50m/s2 Duration:2 hours in each X,Y,Z axes | Appearance | No damage |
| Contact resistance | 20mΩ MAX | |||
| Intermittence | 1μsec MAX | |||
| 16 | Repeated insertion/ withdrawal | When mated up to 50 cycles repeatedly by the rate of 10 cycles per minute. | Appearance | No damage |
| Dielectric strength | 1000VAC/minute | |||
| Insulation | 1000MΩ MIN | |||
| Contact resistance | 20mΩ MAX | |||
| 17 | Salt spray | 16 hour exposure to a saltspray from the 5%±1 solution. | Appearance:No Damage 20mΩ MAX | |
| 18 | Insertion and Withdrawal Force | Insertion and withdraw contact at the speed rate of 1mm/s~5mm/s. | Insertion(Max) | Withdrawal(Min) |
| 7N(Max.) | 1.5N(Min.) | |||
Dimension: (mm)
3.96mm VH PCB Connectors
Inquiry Cart
0