Straight Line Welding And Cutting Equipment , Semi Automatic Gas Cutting Tools
Brand Name:wellnit
Certification:ISE,CE
Model Number:CG1-30
Minimum Order Quantity:Negotiable
Place of Origin:China
Packaging Details:standard seaworthy package for gas cutting machine
Contact Now
Add to Cart
Verified Supplier
Location:
Wenzhou Zhejiang China
Address:
No. 601, Anxin Road, ShaCheng Street,Economic And Technological Development Zone,Wenzhou,Zhejiang Pro.China
Supplier`s last login times:
within 27 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Straight Line Welding And Cutting Equipment , Semi Automatic Gas Cutting Tools
GOODS DESCRIPTION
The main body is made of aluminum of high strength by diecasting
minutely Speed system is adjusted by controlled silicon.Oxygen
acetylene hose is made of high quality rubber with advanced
process. Attached quick connector for hose quick link. Quick switch
is attached in pipe assembly for higher efficiency. Mainly for
straight line cutting and for circular cutting>Φ200mm. Single
torches cutting, groove range: I.Y.V(45°) Applied in shipbuilding,
oil production, metallurgy, metal structure and other manufacturers
etc.
1. Air frame adopt high strength aluminum materials, precision die
casting.
2. Speed control system adopts thyristor speed control tentacles
3. Oxygen acetylene tube adopts imported rubber hose
4. Quick switch installed pipe assembly, and improve the efficacy
5. Give priority to with straight line cutting,can be greater than
200 mm circular cutting.
6. Single cutting torch cutting, grooveI,V(45°).
7. Suitable for shipbuilding, oil, metallurgy, metal structure
factory.
Specifications
| 1. Weight | 16 kg |
| Accessory | 7.8 kg |
| 2. Machine dimension | 435×210×240mm |
| 3. Speed control | silicon control |
| 4. Power source | AC 480V±0.1 50HZ |
| 5. Cutting speed | 50`750/mm/min |
| 6. Cutting thickness | 5-100mm |
| 7. Groove angle | 0-45° |
| 8. Diameteral of cutting circle | ø200-ø2000mm |
| 9. Tip | G02(acetylene),G03(propane) |
| 10. Motor | DC 110V 50HZ 30W 4200r/min |
Contents of package
Carefully take the machine out of its case.
The contents of the standard package are shown below. Check them carefully before assembling the machine.
| 1. Body | 1set |
| 2.Torch unit assemblage | 1set |
| 3. Moving unit assemblage | 1set including left-right, up-down moving unit assemblage and gear rack |
| 4. Tip (acetylene) | 3pcs |
| 5. Power wire | 1pc |
| 6. Specification sheets and certificate of qualification | 1pc each |
| 7. Gas-in connector /pressure cat | 1set |
| 8. Ball-pane screw M4 | 2pcs |
| Standard accessory | |
| 1. Cutting circle unit assemblage | 1set |
| 2. convex guide rail | 2pcs 1.8m/pc or grooved guide rail 1pc 1.8m |
1. Hose:The three hoses are used individually for fuel gas, preheating oxygen and cutting oxygen.
2. Cross hand wheel:To adjust the horizontal distance of torch
3. Cross gear rack
4. Vertical adjusting hand wheel of torch
5. Tip
6. Thermal baffle:To prevent the heat diffusing into the inner of machine.
7. Fuel gas two-port valve:To adjust gas-flow rate.
8. Gas distributor.
9. Clutch hand knob: “STOP” is parting. “START”is combination.
10. Body
11. Speed controller : Increase the speed from “0”to“10”Decease speed from “10” to “0”.
12. Outlet
13. Universal wheel
Straight Line Welding And Cutting Equipment , Semi Automatic Gas Cutting Tools
Inquiry Cart
0