Add to Cart
Function | VM-3004-HYBRID | |
System | Language | English / Chinese |
Operation Interface | Graphical User Interface (OSD menu) | |
Password Security | 2 Levels: Administrator & User | |
Video | Video Input | Supports 4 channels 1080P AHD camera Video input Supports 4 channels CIF/HD1/D1/960H/720P AHD camera Video input Supports 4 channels 1080P/720P IP camera Video input Supports 4-CH 1080P/720P IPC + 4-CH 720P AHD/960H/D1/CIF Video input |
Video Output | 1 each HDMI (max. 1080P), 2 CVBS (Analog); 1 each 3.5mm Jack on Front Panel and one connection on the 24 pin I/O port | |
Video Display | Single picture, 1~8 pictures | |
Signal System | PAL / NTSC ( PAL@200 frame 1080P/sec; NTSC@240 frame 1080P/sec ) | |
Image Compression | H.264 Main profile | |
Audio | Audio Input | 4 Channels |
Audio Output | 2 Channels (Front Panel 3.5mm Jack, 1 in the 24pin connector) | |
Record Format | Synchronized A/V recording | |
Recording & Storage | Image Resolution | CIF / HD1 / D1 / 960H / 720P /1080Poptions |
Video Coding | ISO14496-10 Industry Standard | |
Video Bit Rate | CIF: 1536Kbps ~ 128Kbps, | |
HD1/D1: 2048Kbps ~ 400Kbps, | ||
960H: 2048Kbps ~ 400Kbps, | ||
720P:4096Kbps ~ 400Kbps | ||
1080P:4096Kbps ~ 400Kbps | ||
Select from 8 Levels of Video Image Quality ranging from 1(Highest) to 8(Lowest) | ||
Audio Bit Rate | 40Kbps | |
Storage | Up to 2TB HDD/SSD and 1 SD card for backup(at 3G/4G/WIFI model option) | |
Alarm | Alarm Input | 8 Channels, Select Trigger for either less than 1VDC or greater than 5VDC |
Alarm Output | 1 Channel, 12V output | |
Communication Ports | RS485 | 1 Port for PTZ control or Data Device usage |
RS232 | 2 Port for communication or data usage | |
RJ45 Network | 4 Ports of RJ45, For connection to an IP camera with maximum of 1080P | |
USB | 2 Ports of USB 2.0, the front is used to export record file. The rear panel is used to mirror | |
Wireless Communication* | 3G* | 3G (HSUPA / HSDPA / WCDMA / EVDO / TD-SCDMA) optional Internal module |
4G* | 4G (TDD-LTE / FDD-LTE) optional module to match local cellular carrier | |
Wi-Fi* | Internal Wi-Fi 802.11b/g/n ( 2.4 / 5.8 Ghz) optional | |
GPS* | Int'l Standard GPS* | Internal GPS module. Real-time geographic coordinates, speed information |
G-Sensor | Internal G-Sensor | Supports 3 Axis Motion Detection with user set ranges, for X, Y and Z coordinates |
Software | PC Playback | A/V, GPS, Mapview, Speed, G-Sensor, etc. files available for playback on PC. Limited playback is also available on MDVR |
IVMS | Wireless (require Wi-Fi or cellular Option) real-time A/V monitoring, GPS, alarms, etc. | |
Software Upgrade | Local or Remotely | Upgrade through the front USB2.0 or remotely via IVMS platform |
Voltage Input | +8~+36V | 8~36VDC Please check operational voltage of vehicle prior to the installation of the MDVR and its accessories to prevent possible damage |
Voltage Output | 12V | 12V(+/-0.2V),Max 3A |
ACC Detection | ≤4V | Power Off |
≥6V | Power On | |
Video Input Resistance | 75Ω | 75Ω |
Video Output Voltage | 2Vp-p | 2VP-P CVBS output analog signal, screen input requires 75Ω resistance |
I / O port | <1V | Low voltage trigger |
>5V | High voltage trigger | |
Operation Temperature | -40℃~80℃ | Install in well ventilated area, protected from moisture, heat, dust and vibration |
Dimensions | 192x184x61mm | Including Security Cover 248x184x61mm |
Q: What shall we do when a problem that could not be solve occurs
to the product?
A: Record product model and software version number and submit
detailed problem description to our technical
support engineer for analysis. Detailed description will be very helpful to our analysis.
Q: What shall we do when the mobile device has no video output?
A: 1. Check the power status of the device. If only one blue
indicator is lit up, it indicates that the device is still in
standby mode and not powered on; at the same time, check if red or yellow cable of the main power is supplied
normally; If not, the device cannot be started.
2. Check if the display is powered and if the display video is
switched to AV status.
3. Check the connection status of the video output cable and
display.
Q: What shall we do when the mainframe video input interface is
different from the camera input interface?
A: a 4-pin interface is used for the vehicle device. BNC interface
or air interface is used for the camera. If inconsistency
is found, please use an adapter or connect it to a standard line defined as the line sequence for the vehicle device.
Q: What shall we do when no video is reported via 3G/4G?
A: press the "INFO" key to enter the System Information page, where
you can check if the SIM card is present, inspect
signal intensity and dial-up status, and check if the antenna is properly contacted. Then, check if the SIM card has
traffic and replace it will a new one to re-check it. This is a most basic judgment criteria. If a signal is available, while
dial up fails, check if the center number and port are set correctly. Then, check if the device number is unique.