2 Cavity Plastic Blow Moulding Machine / Pet Bottle Manufacturing Machine CM-A2

Geomembrane Film Blowing Machine CM-A2

Project name: A2 Two Cavity Automatic Blow Molding Machi

A2 Automatic Blow Molding Machine

CE Certification ISO9001:2000

Engineering item:

1. Capacity: 1800-2000pcs/hr (based on 500ml)
2. Max volume of product: 2 liter

Description:

Technique Parameter of blow molding machine:

Trait:

CM-A2 Full automatic blow molding machine is suitable for producing PET/PE and PP plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.

Features of main body:

1). Stable performance with advanced PLC.

2). Automatic preform conveyer to save human cost.

3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.

4). Strong clamping force with high pressure and double crank links to lock the mould.

5). Two ways of operating: automatic and manual.

6). Safe,reliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.

7). Low cost,high efficiency,easy operation and maintenance etc, profited from the fully automatic technological process.

8). Ideal cooling system make the finished bottles without any flaws.

9). Easy for you to install,test and start up.

10). Low rejection rate: less than 0.2 percent.

Service:

Provide whole drawing for the perform mould and bottle mould. Free charge for word design on the mould. We can help you install the machine; from setting machine, testing, and to check the machine is on the good working condition. There is a litter charge, only for flight charge and accommodation.

Delivery time:

45 days upon deposit and approval to the bottle drawing.

Payment:

For machine:50% T/T deposit within five days after the contract is signed against invoice of the seller. The balance of 50% will be paid before shipmment.

Attached:

Functions of auxiliary equipments:

(1) Air compressor is the air source for PET stretch blow molding machine, carrying out the process of compressing air from atmosphere to the required pressure.

(2) Air dryer is to remove the moisture from the compressed air and lower temperature of the compressed air in the heat exchanger.

(3) Air filter is to clear up the impurities out of the compressed air, like carbon-hydrogen, tiny dust and solid particles.

(4) Air tank is to receive and supply air for the machine as storage.

COMPANY