Add to Cart
Automatic Recognition 2 Channel CCTV DVR , Mobile CCTV Camera System DC 12V/24V Parameter:
Name | Automatic Recognition 2 Channel CCTV DVR , Mobile CCTV Camera System DC 12V/24V |
Video format | PAL/NTSC (automatic recognition) |
Each video resolution | 1280*720, refresh rate PAL: 25 frames/sec, NTSC: 30 frames/sec, peak value: 1Vp-p, impedance: 75Ω |
Video interface | 2 inputs (RCA interface), 1 output (RCA interface) |
Video recording | TF card ( ≤ 64 G), video format is AVI |
Audio | MIC recording |
Operation Screen Mode | Remote Control: Remote/Extension Line Tact Switch |
Power consumption | Host operation: 2W; |
Power output | No |
Rated voltage | DC 12V/24V |
Working temperature | 0 ~ +55℃ |
Net weight | 150G |
Size | 101*59*20 mm (length*width*height) |
Full HD car vehicle blackbox Mini 2CH Mobile DVR main function:
Automatic recorder: Boot automatic recording
Front and Rear double way record: 2-way splitted separately
recording
Reversing Image: automatic trigger reversing image
175 degree wide angle
Local playback
G-sensor: After parking automatic monitoring record when have
collision
24 hours real time monitoring
Loop recording
High definition: 720P
Low power protection
Time watermark
2 Channel mdvr Mini Portable dvr recorder kit full HD car vehicle blackbox dvr remote control usage:
<Security Tips>
1. This 2-way mini car dvr product is only a driving assistance system. Please concentrate on
driving safely.
2. Before using this car dvr, please read the operating
instructions carefully.
3. When the car is moving fast, it is recommended to turn off the
dvr recorder and concentrate on the road conditions
4. Please consciously abide by the relevant national traffic
regulations.
<The role and function of 2-way mini car driving parking system>
★ The installation of the intelligent parking system does not
damage the original car circuit, will not affect the safety of the
car circuit, does not affect the 4S shop's vehicle warranty.
★ This product has two functions: front view and rear view. It
supports 2-way video display and video at the same time. The driver
can monitor the conditions around the car according to the driving
environment.
★ This product has a recording function, recording at the same time
when parking
★ This product supports parking monitoring and gravity sensing.
★ Gravity sensing: When a collision is sensed, the system urgently
records the moment of collision video.
★ Parking monitoring: Video is automatically recorded during the
vehicle's flameout and power failure.
★ With low voltage protection function: When the battery is low, it
will automatically shut down and the vehicle will start to recover
video without losing battery.
★ When gravity sensing is enabled, after the vehicle shuts off, the
system will automatically shut down approximately 5-10 minutes.
When the collision occurs, the video will be automatically turned
on for about 3 minutes.
★ When the product leaves the factory, gravity sensing and parking
monitoring are turned off by default.
Ⅰ. Description
(1) Power/Power LED. When the power is on, the power indicator is
always on. When the gravity sensor or 12V output is overcurrent or
the power off memory function is enabled, the power indicator
blinks. Status/Status LED. When power is on, the light is always
on. When the system performs video recording, the power indicator
flashes.
(2) The normal input voltage of this product is 12V / 24V.
(3) Both the trigger line and the manual button can select the
image of any one of the two cameras.
(4) In the triggered state, CAM1 takes precedence over CAM2. After
the trigger is cancelled, the trigger is automatically released
after about 3-5 seconds.
(5) The on-board camera is powered by the equipment. The wiring is
convenient. The onboard camera is powered by the equipment and the
wiring is convenient.
(6) The DVD navigation screen display is triggered by the "blue"
line of the device. The wiring and display are convenient. The
7-inch or 5-inch display can be directly powered by the device's
"blue" line, making the wiring more convenient.
(7) It can be set to stop monitoring (loss of power automatically
shut down) or after the stop to activate the dynamic gravity sensor
+ loss of power off function (more power, save more storage space);
can set the standby function.
(8) Short press (less than 1 second) Manually press the key to
switch the camera image; long press (more than 1 second)
two-picture mode.
(9) A maximum of 2 cameras can be connected to support AHD or TVI
720P signals.
<Security Tips>
1. This product is only a driving assistance system. Please concentrate on driving safely.
2. Before using this product, please read the operating instructions carefully.
3. When the car is moving fast, it is recommended to turn off the product and concentrate on the road conditions.
4. Please consciously abide by the relevant national traffic regulations.