Add to Cart
Remote Control 4 Channel Car DVR Recorder For Bus Truck High Trigger
<The role and function of parking system>
★Quad intelligent parking system installation does not destroy the original car circuit, will not affect the safety car circuit, does not affect the vehicle warranty 4S shop situation.
★ This product has a front, left side, as the right side, rear four functions, the driver can according to the required driving environment, monitoring the situation around the car; two with automatic and manual control mode, when the factory default automatic mode.
Ⅰ.Description
(2) trigger line and manual keys can select the image in any way 4-way camera
(3)In Trigger state, hand the keys effectively. When you press the manual key "Quad" of or button, the trigger is invalid, Undo "QUAD" trigger to be effective
(4) After triggering undo, image delay three seconds, and enters the standby state.
(5) the trigger condition, no priority, when the trigger line when more than two trigger, then the trigger line corresponding channel full-screen image, only three seconds, and then jumps automatically split image screen.
(6) can connect up to four cameras, and automatically split video screen
(7) car camera powered by the device for easy wiring
(8) DVD display device triggered by a switch, wiring and display convenience
(9) Each image can be set to forward / mirroring respectively, RCA connectors can be configured to connect DVR / VCD
Ⅱ.the screen mode
★Auto Mode introduces :( numbers represent the corresponding camera channel number, the channel number is not shown)
★Manual mode introduced:
When turned off, tap can be turned on, the display automatically split image screen, tap again to close.
★ Host box with high integration technology, four cameras centralized power supply box by the host, thereby greatly reducing the tedious wiring during installation, in addition to four cameras captured the image signal after the hosts converted by a video cable and the navigation DVD of "AV" port connection
Ⅲ.Button remote Features:
:Press, to display "type" 4-screen mode.
:Press, to display "H-type" four-screen mode
:Press, Channel 1 big screen again press, return to automatic display.
:Press, Channel 2 large screen, press again to return to automatic display.
:Press, Channel 3 big screen again press, return to automatic display.
:Press, Channel 4 large screen, press again to return to automatic display.
:Press, display a variety of 3 screen mode,Cycle through each screen,each press a mode switch.
:Press, display a variety of 2 screen modeCycle through each screen,each press a mode switch.
:Press the power ON, again short press the power OFF.
P.S.When you press the manual key“Quad”ORkey, the trigger is invalid, Undo "QUAD" trigger to be effective
Ⅳ.<Wiring Diagram Installation>
<DIP switch>
★ mirror DIP switch: 4 switches, achieve about Mirror: dial-up ON, mirroring; OFF Just dial down. As default.
★ DVR DIP switch: a switch, switching system switched on: up dial ON, the system always boot; dialed down OFF, trigger boot.
The access DVR recording, it is recommended to ON state.
Ⅴ.Technical parameters
Name | Video system For Vehicle |
Video system | PAL/NTSC(automatic identification, attention, connect the camera before power on) |
Video parameters | Resolution 720×576, 25FPS, Vp-p:1.0V, impedance: 75Ω |
Video Interface | 4 inputs (RCA connector), 2 outputs (RCA connector) |
Auto picture mode | Wire: High Trigger / Remote |
Mirror | OFF/ON |
Power Consumption | hosts running: 2W; power-saving mode: 1W |
Output Power | 12V / 1A (camera power supply) |
Rated voltage | DC 12V/24V |
Working temperature | 0℃-+55℃ |
N.W. | 340g |
Size | 107*53*21mm (L * W * H) |
<Four-core trigger line description>
Four-wire:
Line 1 (Green) is a front view of the trigger line, you can access the Front Office assist lamp or other neutral switch,When triggered, the system boot, revoked, the system standby
Line 2 (white) left, as the trigger line, then turn left at light positive (when the electric pen test twinkling).When the trigger, automatic full screen display,
Line 3 (yellow) to reverse the trigger line, then reversing light positive,When triggered, the system boot, when withdrawn, system standby,
Line 4 (blue) to the right, as the trigger lines (sparking when electric pen test) then turn right at lights positive,When triggered, automatic full screen