|Led||1pc white led+1pc purple led|
|Operating time||More than 10hrs|
|Color box size|
Before first time use, allow the solar light to charge initially
for at least 8-12 hours.
Step 1: Position the garden stake into the ground.
Step 2: Connect the support pole to the garden stake.
Step 3: Connect the solar panel to the support pole.
The switch is initially at the OFF position.
Should the light source start to dull or stay on for shorter
amounts of periods, we recommend that the rechargeable battery
should be replaced in the following way.
Step 1: Remove the solar panel from plastic cover by turning
Step 2: Replace the spent battery with a new one making sure to get
the polarity correct as
this could damage the unit.
If your solar light does not turn at night, it may be caused by one
of the following conditions:
1. Battery is not fully charged or needs replacement:
Make sure your light is located in an area where the solar panel
gets the maximum amount
of full, direct sunlight every day. Allow sunlight to recharge the
battery for A FULL, SUNNY
DAY. If the weather has been cloudy or overcast during the day, the
battery will not be
recharged for operation at night.
Replacement batteries can be purchased locally at a retailer near
2. Solar panel is dirty:
A dirty solar panel will not allow the battery to fully charge.
This will shorten the life of the
battery and cause the light to malfunction. Clean regularly with a
soft cloth or paper towel.