200m / min Corrugated Cardboard Production Line Five Layer 1600MM Width

5 Ply 1600MM 200m Per Min Corrugated Paperboard Production Line​​

200-1800-Ⅱtype five layer corrugated paperboard production line:

※ZJ-V5B hydraulic shaftless mill roll stand

※structural feature:

★adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others,the lifting of the paper adopts hydraulic drive.

★brake adjustable adopts multipoint braking system.

★every stand matched two sets paper car , and they can paper on the both sides at the same time.

※technical parameters:

1,the range of clamping paper:MAX1800mm MIN1000mm 2,clamping diameters:MAX￠1500mm MIN￠350mm

3,main shaft diameter of paper holder:￠240mm 4,gas source work pressure(Mpa):0.4---0.8Mpa

5,equipment size:L_mx4.3*W_mx1.8*H_mx1.6 6,single weight:MAX4000Kg

※Hydraulic system parameters:

1,Work pressure(Mpa):16---18Mpa 2,lifting hydraulic cylinder:￠100×440mm

3,Clamping hydraulic cylinder:￠63×1300m 4,hydraulic station motor power:3KW --380V -- 50Hz

5,solenoid valve voltage:220V 50 Hz

※Mainly purchased parts, raw materials and origin:

※ paper trolley, track

※structural feature:

★the whole track buried,The main frame of the 14th Channel steel with ¢ 20mm cold drawn welded round,length of track 6000mm.

★each paper holder matched two sets paper trolley, and paper on both sides at the same time.pull the roller paper to the right place.

※Mainly purchased parts, raw materials and origin:

※RG-1-900 top(core)paper preheat cylinder

※RG-3-900 triple preheater

※structural features:

★preheat roller accord the pressure container national standards,and enclose the pressure container certificates and inspection certificate.

★Each roller surface after grinding precision grinding and dealing with hard chrome plating, Surface friction is small, durable.

★electric adjustment angle, and angle can rotation adjustment the preheat area in the range of 360°.

※technical parameters:

1,Effective width:1800mm

2,diameter of preheat roller:￠900mm

angle adjustment range:360°rotation angle shaft diameter:￠110mm×2

3.steam temperature:150-180℃ steam pressure:0.8-1.3Mpa

4,working power:380V 50Hz 5,Motor power:250W short(S2)working system

※Mainly purchased parts, raw materials and origin:

※SF-360E multi-cassette positive pressure single facer

※structural features:

★main flute roller:￠360mm(according flute differ),pressure roller￠385mm,preheat roller￠400mm.

★using negative pressure type design, low heat loss,helps the core paper to press evenly and close to the surface of corrugated roller, make the corrugate molding better, pressure uniform, the top of corrugate can glue uniform and better, make the single corrugated paper have perfect laminating.

★quickly change rollers in 15 minutes, while change corrugated roller with the electric trolley loading,the entire group of corrugating with motor drive,put into the machine,fixed to the machine base,only need a few buttons can complete the replacement quickly and easily.

★corrugated roll adopt 48CRMO high quality alloy steel,dealing with heating, after grinding hard chrome plating surface treatment.

★corrugated roll and pressure roll adopt the airbag control system with high stability, at the same time with pneumatic control buffer effect.

★Glue volume control with electric adjustment,rubber septum electric device,the glue system can operate independently when the motor stops,prevent glue exhausted.

★the moveable type glue unit is convenient to clean and maintain.

★easy operation control system, touch screen operation interface,Drawing with color display operating status, function selection, fault indication, and parameter settings, etc. can exclude exhibit this machine fully functional, easy to operate, user-friendly.

★built-in pre-conditioner with proportional spraying device, adjustment the core paper temperature and moisture.

★main, vice corrugating and pressure roller bearings are used in high-temperature grease to ensure bearing life running smoothly.

※technical parameters:

1,effective width:1800mm 2,operation direction:left or right(Determined in accordance with the customer's facility)

3,design speed:200m/min 4,temperature range:160—200℃

5,air source:0.4—0.9Mpa 6,steam pressure:0.8—1.3Mpa

7,corrugated flute:(UV type or UVV type)

※roller diameter parameters:

1,diameter of up corrugated roller: ￠360mm 2,diameter of pressure roller:￠385m

3,diameter of glue roller:￠268mm 4,diameter doctor roller :￠155mm

5,diameter of preheater:￠400mm

※powered motor parameters:

1.main frequency drive motor:30KW rated voltage:380V 50Hz Continuous (S1) working standard

2,suction motor:15KW rated voltage:380V 50Hz Continuous (S1) working standard

3,glue reducer:100W rated voltage:380V 50Hz short(S2) working standard

4,glue gap motor:250W rated voltage:380V 50Hz short(S2) working standard

5,glue pump motor: 2.2KW rated voltage:380V 50Hz Continuous (S1) working standard

※Mainly purchased parts, raw materials and origin:

※ZDF heavy type conveyor bridge

※structural feature:

★This portion of the main frame with channel, beam, angle and so connected together.

★Both sides are equipped with safety barriers and security herringbone pedal operation plane is equipped with safety ladder, ensure staff safety and ease of operation.

★Independent frequency motor lift mechanism, PVC conveyor belt, single watt cardboard wavy rule stable.

★All roller surface after grinding hard chrome plating.

★Vacuum tension control, suction tube 5-inch, plus regulating valves, air flow infinitely adjustable.

★Electric correction device II sets shutter correction double guide column positioning, screw drive, fast and accurate positioning, walking steadily.

★Bridge over the auxiliary high-strength composite sheet, smooth, durable, low friction, reducing cardboard transport resistance.

※technical parameter :

1,working width:1800mm

2,operation direction: left or right(Determined in accordance with customer plant)

3,highest height:4700mm

4,working speed:200m/min

※roller diameter parameters:

1,upper paper roller and tensioning roller diameter: ￠130mm

2,Conveying roller diameter: ￠180mm

3,over paper roller and guide paper roller diameter:￠111mm

4,On paper towing shaft diameter:￠110mm

※Power motors and electrical parameters:

1,single facer corrugated paper lifting motor: 4KW (frequency ) 380V 50Hz Continuous (S1) working standard

2,Bridge adsorption fan: 3KW 380V 50Hz Continuous (S1) working standard

3,adjust cardboard wide motor: 250W 380V 50Hz short(S2)working standard

※Mainly purchased parts, raw materials and origin:

note:all the roller axis surface after grinding and dealing with hard chrome plating.