Waste Plastic Process Waste Oil To Diesel Machine 50% To 90% Oil Ratio

Waste Plastic Process Waste Oil To Diesel Machine 50% To 90% Oil Ratio

Function of Waste Oil To Diesel Machine

The function of the equipment is utilizing the waste plastics to be catalytic cracked in Atmospheric pressure reactor, and then the organic polymer chain in waste plastics is cut off and reduced to low molecular weight hydrocarbons, fuel oil. The combustible unsolidified gases under C5 gas generated by the equipment is recycled by the gas recovery unit and the transported fuel burner by pipeline after steady pressure. So it is heated by itself and eliminates the secondary environmental pollution.

Our Waste Oil To Diesel Machine plant adopts the latest pyrolysis technology, and have obtained several patents and certificates after decades of innovation and development. It has been widely recognized at home and abroad, with superior performance, competitive price, high efficiency, maintenance convenience and cost saving.

Our skilled professionals will supply customers with optimal all-in-one solutions required on civil drawings, installation & erection,supervision,

commissioning and personnel training as well as after-sale service.

Main raw material: PP, PE and PS.

Power required: around 280KWH / Ton

Daily capacity to process waste plastic: between 10 tons to 500 tons

Oil ratio: between 50% to 90% according to the different raw materials

The 4 final products we get after pyrolysis and distillation. And the usages of them is below.

1- The refining oil

(1) diesel oil (0# or 5#)

It contains 75 - 80% for all oil. And it can be used in forklift and other engineering truck, vessel, generator and etc.

(2) gasoline oil

It contains around 20% for all oil. And it can be as car oil after blending with oil of higher octain value in 1:1, or it used in gasoline generator directly.

2- Gas

It will be reused. (The combustible gas generated in processing can be recycled as fuel to heat equipment itself, which will save a lot of energy for the whole plastic pyrolysis process.)

3- Water

It will be reused as condensation water.

4- Slag

It can be made active carbon and carbon rod or combustion alongwith coal and carbon.

After sales service

• The equipment of turnkey project, main body quality assurance of two years (except for violation of operating regulations and man-made damage).
• Life-time maintenance
• Technology upgrading service for paid lifetime.
• Before ordering, please do a plastic market research investigation seriously. Only reliable raw material insurance can guarantee your returns.
• Equipment production and storage area are of key fire-proof area, no fireworks; please stay away from the residents living area.

Anhui Oursun Resources Technology Co., Ltd. specializes in waste plastic processing industry for more than ten years, has a strong R & D team, and the equipment has been upgraded to the latest fourth generation which completely solve the three problems of "environmental protection, safety, oil quality". Also it can produce with high efficiency continuously. The “Environmental and Energy-saving Waste Plastics Normal Pressure Cracking Fuel Equipment” with completely independent intellectual property rights is highly praised by domestic and foreign customers for its unique process, perfect environmental protection, safe design and full utilization of energy.

How to safely and thoroughly eliminate the environmental pollution caused by waste plastics? After more than ten years of hard work and development and numerous trials, Anhui Oursun team has applied for more than 30 patents. Compared with domestic and foreign equipment, it is environmentally friendly and safe. In particular, it is in a leading position in terms of continuous production and cracking rate. The company has the advantages of Hefei Science and Technology City and works closely with colleges and universities to keep technology in a leading position.