Add to Cart
High Viscosity Polypropylene Diaphragm Pump , Pneumatic Operated
Diaphragm Pump
Polypropylene Diaphragm Pump Description
1. Double Diaphragm Pump Air Operated Double Diaphragm Pump Rubber
Diaphragm for Pump for Food& Chemical, Chemical Resistant
Diaphragm Pump is the new kind of transportation machine, adopting
compress air, smoke and industry exhaust gas as power source.
2. It has two diaphragms, the compressed air come to the pump body
to drive the pump in the constant action of sucking and releasing,
so it can pump the liquids easily by this principle. Also it is
very safe in dangerous environment since it has no electric motor.
Polypropylene Diaphragm Pump Parameters
Item | Description | Unit | Reference Figure |
1 | Maximum air inlet pressure | Mpa | 0.6 |
2 | Maximum flow rate | 1/Min | 27 |
3 | Maximum lift | M | 45 |
4 | Maximum outlet pressure | Mpa | 0.6 |
5 | Maximum particle size | mm | 1 |
6 | Weight | kg | 1.8 |
7 | Noise level | db | <68 |
8 | Max dry suction | m | 4.2 |
Polypropylene Diaphragm PumpSpecifications
Air Diaphragm Pump
1. Non leakage
2. Good self priming performance
3. Convey all kinds of medium
Polypropylene Diaphragm Pump Application
1, Poisonous, combustible and volatilizable liquids.
2, Strong acid, strong alkali liquids with corrosion
3, Tanker truck, bilk plant, load and unload of oil products
4, Pickle, fruit pulp, mashed potatoes, chocolates, etc
5, Paint, rubber, pigment and adhesives
6, Various ceramic pulp, grouting, mortar and slurry
7, Various latex, organic solvents, stuffing
8, Stripping of oil carrier (pump dirty water and residual oil)
9, Common hop, thin paste of yeast power, syrup and molasses
10, Special liquid
A 06 X X - X X X - X (model selection)
Form of pipe mouth:A-BSP B-NPT(F) C-Flange
Diaphragm material:9 – Santoprene H – Hytrel T - PTFE/Santoprene
Ball material:9 -Santoprene H – Hytre T – PTFE A - Acetal
Ball seat material:P/K –Polypropylene/Kynoar SS –Stainless Steel
Pump material: SS –Stainless Steel AL –Aluminum Alloy CI- Carbon
Steel P/K –Polypropylene/Kynoar
Maximum Applied Temperature Limits (diaphragm / ball / seal
material)
Acetal ···············································40°- 150°F
(4.4- 65.5°C)
Santoprene··········································-40°- 225°F
(-40°- 107.2°C)
················································40°- 220°F (4.4°-
104°C) Nitrile·················································10°-
180°F (-12°- 82°C)
Viton····················································-40°-
350°F (-40°-176.6°C)
Hytrel··················································-20°-150°F
(-12°- 93°C)
Kynar·················································10°-200°F
(-28.9°- 65.5°C)
Polypropylene·······································32°- 175°F
(0-79.4°C)
0.25” Flow diagram