OEM Service Tungsten Bar Stock / Cast Iron Tungsten Carbide Wear
Plates
YG6 Suitable for semi-finishing and light-load roughing of cast
iron, non-ferrous metals and their alloys, heat-resistant alloys,
titanium alloys and non-metallic materials.
YG8 It is suitable for roughing of cast iron, non-ferrous metals
and their alloys, heat-resistant alloys and titanium alloys. It has
high impact resistance and is suitable for continuous and
interrupted cutting.
M05 It is suitable for the finishing of iron-based, nickel-based
superalloys and high-strength steels. It is also suitable for the
finishing of chilled cast iron, heat-resistant stainless steel,
high-manganese steel, hardened steel and glass products.
M10 Suitable for semi-finishing of stainless steel and common alloy
steel.
YW3 Suitable for finishing and semi-finishing of stainless steel
and common alloy steel.
M20 Suitable for finishing and semi-finishing of stainless steel
and low alloy steels and iron-based alloys, as well as for integral
milling of low alloy steels.
YW2 Suitable for finishing and semi-finishing and light-load
roughing of stainless steel and alloy steel.
M30 Suitable for high temperature alloys, heat resistant alloys,
titanium alloys, etc., especially for coarse and semi-finishing of
aerospace materials, allowing intermittent turning with increased
rake angle.
P10 Suitable for finishing steel and cast steel, with cutting speed
and low feed low depth.
P20 Suitable for semi-finishing and light-load roughing of steel,
cast iron and stainless steel, it is a universal mark with good
applicability.
YS25 Specially used for rough milling of steel and cast steel.
YT14 Specially used for semi-finishing of steel and cast steel.
P30 Specially used for heavy cutting of steel and cast steel, in
the case of poor working conditions,
roughingwith medium and low speed and large feed.
YC330S Specially used for milling of steel and cast steel, it has
good toughness and good impact resistance, and is the preferred
grade for gravity milling.
P40 Suitable for gravity cutting of steel and cast steel, it can be
used for large cutting, also for section milling.
Cemented carbide has a series of excellent properties such as high
hardness, wear resistance, strength and toughness, heat resistance
and corrosion resistance, especially its high hardness and wear
resistance, which remains basically unchanged even at a temperature
of 500 ° C. It still has a high hardness at 1000 °C. Carbide is
widely used as a tool material, such as turning tools, milling
cutters, planers, drills, boring tools, etc., for cutting cast
iron, non-ferrous metals, plastics, chemical fiber, graphite,
glass, stone and ordinary steel, can also be used for cutting
Hard-to-machine materials such as heat-resistant steel, stainless
steel, high manganese steel, and tool steel. The cutting speed of
new cemented carbide tools is now several hundred times that of
carbon steel.
Cemented carbide can also be used to make rock drilling tools,
mining tools, drilling tools, measuring gages, wear parts, metal
grinding tools, cylinder liners, precision bearings, nozzles, etc.
Benefits
* Substantially longer service life than traditional steel tools
* Consistent working depth and tillage quality
* Permanently sharp cutting edges mean improved heeling and less
traction power required
* Needs no depth adjustment due to wear
* Saves time and money thanks to fewer blade changes
* Much longer periods of use during good weather
* Optimum utilization of machine power
* Lower tool costs per acre
* Money saved through reduced stocks