Add to Cart
Small 1000L Water RO System/Drinking Water Reverse Osmosis System
General Description
1. According to the raw water quality report and the output water quality requirement of the customer,Shanghai Gorun can provided you a full range of configuration about water equipment.
2. Depends on different configuration,the water quality can meet the requirement of CP2010/USP34/E37 to the purified water or ultra purified water.
3.The equipment uses modular production with rational and compact structure and small occupying area.The whole process has no intermediate water tank with low contamination risk.
4. The equipment has unique internal circulation mode with dual water supply,realizing inrternal cycle in water machine.
1.3 Third stage pretreatment (Resin softener)
Cationic resin used for water softening, primarily to remove
hardness of water. The hardness of water is a major calcium (Ca2
+), magnesium (Mg2 +) ion composition, when containing the raw
water hardness ions through the resin layer, the water of the Ca2
+, Mg2 + was exchanged resin adsorption, and other objects at the
same time the quality of the release of sodium Na + ions flow from
the softener in the water is removed from the softened water
hardness ions. So as to effectively prevent the reverse osmosis
membrane fouling
1.4 Fourth stage pretreatment (Micron filter)
Particle size in water to remove fine particles, sand filters can
remove very small colloidal particles in the water, so that the
turbidity reached 1 degree, but still per milliliter of water for
hundreds of thousands of particle size 1-5 microns colloidal
particles, the pressure on this filter to remove water after the
particle size of 100 microns or less in small particles, to further
reduce the turbidity, to meet the next process of the water
requirements of the protection of the next long-running processes.
1.5 RO system
Using reverse osmosis technology for desalination, reverse osmosis
membrane was only 0.001 micron pore size, can be harmful to remove
dissolved solids and bacteria, viruses, etc., desalination rate of
more than 99.6 percent, in line with national standards to produce
pure water, the host section contains the security filter,
high-pressure pump and reverse osmosis membrane, security filters
for the fourth grade and above pre-treatment systems, high-pressure
pump is the host of one of the core equipment for the reverse
osmosis membrane elements to provide sufficient pressure to
overcome the penetration resistance to pressure and run to meet the
needs of a device to achieve the rated water.
High Quality RO Water treatment plant Parameter:
Model | Volume of output water | External dimension | Power |
RO-500 | 0.5T/h(25°C) | 1500*850*1800 | 1.5KW |
RO-750 | 0.75T/h(25°C) | 1650*900*1800 | 1.5KW |
RO-1000 | 1T/h(25°C) | 1500*1000*1800 | 1.5KW |
RO-2000 | 2T/h(25°C) | 2500*650*1700 | 3KW |
RO-3000 | 3 T/h(25°C) | 3500*850*1700 | 4KW |
RO-4000 | 4 T/h(25°C) | 3500*850*1700 | 5KW |
RO-5000 | 5T/h(25°C) | 3500*1000*1700 | 5.5 KW |
RO-6000 | 6T/h(25°C) | 3500*1000*1700 | 7KW |
RO-7000 | 7T/h(25°C) | 4500*1000*1800 | 9KW |
Application:
Pure drink water, mineral water
Water for food and beverage production
Water for boiler, treatment of the industrial waste water
Water for medical use, high purity water for electronics industry
Water treatment Flowchart
Flocculant doser Antiscale doser raw water tank- Pressurized pump-
Multimedia filter - Active carbon filter- Precision filter-pH
adjust safety filter-1st high pressure pump-1stage RO -Middle water
tank -2ND high pressure pump- water recycle Ozone generator 2ND
stage RO - Pure water tank-Pressurized pump- Oxidation tower-
Terminal pump- Ti rod filter- Filling.
We have