Grey granite stone block paving kerbs curbstone, flamed, honed,
bush hammered, sawn cut
Kerbstone according to the different materials, the general
situation is divided into two kinds: the concrete kerbs and stone
kerbs. According to the cross-sectional dimensions of kerbstone can
be divided into H-kerb, T kerb, R kerb, F-kerb, TF-kerb and P-type
kerbstone.
By road along the line of stone classification for the Curve
kerbstone, straight straight kerbstone. The Fire plate Curve
kerbstone can be used along with the straight-line road stone.
Installation form
Kerbstone form has vertical, oblique type and so on. Walking along
the Stone road, both simple and effective walking method to
regulate the body's organs balance, can increase the fun, but also
disease prevention and treatment, longevity, to protect
pedestrians, vehicle traffic safety and ensure that the road along
the edge of the orderly role.This paper introduces the construction
technology of curbstone from digging trough, installing and
reinforcing kerbstone, and summarizes the quality requirements and
precautions of curbstone, in order to ensure the quality of
construction and improve the aesthetics of road.
Material requirements
Curbstone using a uniform texture of natural granite mechanical
cutting processing, the strength of the stone must be qualified,
the requirements of uniform color, the surface without cracks,
angular integrity, the appearance of the same, no obvious spots,
chromatic aberration, not allowed to have a weathering phenomenon,
loading and unloading, not to fall, hit, bump, touch, to avoid
damage.
Processing requirements
According to the uniform length of the material, external
appearances must be machine-cut polishing, the length of the
allowable error in the ±20mm range, width, thickness, height
tolerance within the ±2mm range.
Construction requirements
1. Kerbstone must hang the line to carry out the construction,
according to the side plane top showing the high-line tension,
according to the wire yard side flat stone, side flat stone to Ann
is, should not roll, side top line straight smooth smooth, no high
or low error tooth phenomenon, plane no upper and lower error,
internal and external error tooth phenomenon.
2. It must be seat slurry masonry, the seat slurry must be dense,
strictly prohibited to plug seam masonry;
3. It's seam dislocation does not exceed 1mm, the side stone and
the stone must be evenly staggered in the middle.
4. Its side of the flat stone should be guaranteed size and finish
to meet the design requirements. Beautiful appearance, on the
corners of the side of the stone should be the design radius of the
special processing curve stone, masonry to ensure smooth, round,
tight seam. The curved side stone must be polished after artificial
fine chisel.
5. Road along the back of the stone should also be compacted,
tamping width of not less than 50mm, thickness of not less than
15mm.
6. Road along the stone hook seam: Hook seam must be hung again,
the side of the stone seam inside the debris removed clean, water
wetting, and then with 1:2.5 Cement mortar grout fill the hook dry.
7. Side flat stone hook seam, after the appropriate watering
maintenance.
Product Name | Granite Kerbstone |
Popular Material | Granite, basalt, limestone, Porphyry |
G603,G654,G684 , black basalt ,G682, G681, G602, |
G636, red porphyry, Spray White/White Wave, Blue limestone |
Finishing | Bush-hammered, flamed, split, sawn cut, polished |
Finishing edge | bevel edge, chamfered, bullnose edge, straight edge, cove edge,
radius edge etc |
|
Size | L (cm) | 80/90/100/110/120cm etc |
W (cm) | 10/12/15/18/20cm etc |
T (cm) | 20/25/30/35/40/50cm etc |
Popular sizes | 10*30*100;12*30*100;15*30*100;15*35*100;10*20*100;12*20*100; |
10*25*100;12*25*100cm |
Color | Grey, yellow, red, white |
Lead time | Within 15-20 days after deposit received, depends on customers'
order quantity |
Payment | T/T/LC/WestUnion |
Advantages | 1. our own quarry and factory, have best price |
2. 12 years export experience |