Home /

Fiberglass Oil Mist Filter Element OM / 120 Model For Centrifugal Air Compressor

Fiberglass Oil Mist Filter Element OM / 120 Model For Centrifugal Air Compressor

Brand Name:FILTERK
Certification:ISO 9001
Model Number:OM/120
Minimum Order Quantity:10 pcs
Delivery Time:1 week
Payment Terms:T/T, L/C, Western Union, D/A, D/P
Contact Now

Add to Cart

Verified Supplier
Address: No.1 Haixing NorthRoad,Nanfeng,Zhangjiagang,Jiangsu,China 215600
Supplier`s last login times: within 39 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details

FILTERK OM/120 Centrifugal Compressor Air Oil Seperator Filter

Why use Air Oil Separating Filter Element ?


  • Oil smoke is hazardous to your health.
  • Oil smoke causes slippery floors and collects oil and dust on machines and walls.
  • Oil smoke can lead to coating in ventilation pipes, a potential fire risk, and in heat exchangers, so reducing the efficiency of heat recovery.
  • The cutting oil which drains from the filter can be reused.
  • The amount of oil smoke polluted air discharged must not exceed the prescribed limits.

Air compressors and oil


Air compressors are used in a variety of industrial settings, including construction, manufacturing
and engineering processes. These devices require oil to cool the mechanism during operation,
lubricate moving parts and seal the system to prevent air leakage. However if the oil used for the
above purposes becomes mixed with the air used in the compressor, everything from the
distribution network to the production equipment may be negatively impacted. This is why an air oil
separator filter is an essential part of any compressed air system.


The air-oil separation process


In compressed air systems, the majority of the oil is removed by centrifugal force. The remaining
amount, which consists of small droplets and mist, must be separated out by an air oil separator
filter. Installed in the compressor’s air receiver tank, this filter is made of layers of borosilicate glass
fibers which remove the residual oil from the air stream. Basically, fine oil droplets are strained
through the filter medium and as they move, they coalesce to create larger drops. Gravity induces
these drops to move downward, where they collect at the bottom of the separator. They are then
sucked back into the air compressor’s oil sump and reused in the system. The compressed air,
cleaned of oil residue, continues on to the air receiver.


Types of air oil separator filter


There are a variety of different air oil separator filter designs available on the market. The wrap type
is the original design used to separate oil droplets from compressed air streams. It consists of a flat
layer of borosilicate glass fibers wrapped around a central tube. Pleated air oil separators filter
have a larger surface area due to their pleated filter medium and because of this can typically
handle an air flow capacity which is double that of the wrap type. Deep filter air oil separators also
provide a better capacity than wrap filters. They accomplish this by incorporating up to three
different grades of glass fiber, which are attached to the support tube in greater quantities than is
the case with wrap separators. The capacity of this type is about equal to that of pleated air-oil
separators. Meanwhile, spin on separators consist of a combined unit made up of filter medium and
housing. This makes it easier to replace during maintenance.


Filterk has the solution!

  • FILTERK OM/120 air compressor oil smoke eliminator elements have been designed to guarantee more than 99.9% separation of particles down to 0.3µm. The separating efficiency remains constant and does not deteriorate over time.

  • It far exceeds today's legal requirements and FILTERK OM/120 air compressor oil smoke eliminator element is therefore a sound investment for the future.

FAQ:

1. Q:Are you a factory or trading company?

A:We are a factory


2. Q:Where is your factory located? How can I visit there?

A:Our factory is located in Zhangjiagang City, Jiangsu Province, China, about 1.5 hours from Shanghai and

40 minutes from Wuxi Dong station by car. All our clients, from home or abroad, are warmly welcome to visit us!


3. Q:How can I get some samples?

A: We are honored to offer you samples.


4. Q:How does your factory do regarding quality control?

A:Quality is priority. Filterk people always attach great importance to quality controlling from the very beginning

to the very end. Our factory has gained ISO9001:2008 authentication.


We are your best choice!


China Fiberglass Oil Mist Filter Element OM / 120 Model For Centrifugal Air Compressor supplier

Fiberglass Oil Mist Filter Element OM / 120 Model For Centrifugal Air Compressor

Inquiry Cart 0