Add to Cart
Torgue Head Dental Contra Angle Handpiece , 6 Hole Fiber Optic Handpiece
NSK Fiber Optic Handpiece
Description:
6-Hole Fiber Optic Handpiece With Quick Couplin
Chuck Type:Push Button, Compatible with NSK Machlite/Phatelus
Bearing:Stainless bearing
Spray:Triple water spray
Working Air Pressure:0.20-0.25MPa(0.22MPa prefrred)
Rotation Speed:350,000-400,000R.P.M(Standard Head);
280,000-320,000R.P.M(Torque Head);
Bur Applicable:Φ1.595-1.600mm
dental handpiece advantage:
1: Mini( Standard /Torgue Head.)
2: The machine maintenance is simple ,can be more than stopwatch
used alternately to extend service life.
3: Hanpieces for single water spray ,drainage holes and air flow
adopts precision edm.
The atomization effect is better .
4: Classic non-slip pattern , feel more comfortable.
5: The collet type movement compared with opne movement
more can guarantee the movemnt up and down bearing concentricity.
Features:
1. Clamping force of handpiece is:20-45N
2. Noise not exceed 70dB
3. At 25-30 atmosphele pressure,350,000-400,000R.P.M(Standard
Head);280,000-320,000R.P.M(Torque Head);
4. Optical handpiece ,3 point water spray,double air tracks, quick
coupling, light guide vitreous, illumination≥25000LUX. Voltage is
3.3V±0.1V, LED light.
Product Parts:
Consists of handpiece head, handle, caudal thread, cartridge.
Working Conditions:
1. Air pressure 0.25~0.30mpa,must be filtrated.
2. Use high speed dental bur with shaft diameter
Φ1.59~1.60mm×21-23mm and roghtness less than 0.8um.
3. The amount of handpieces spray or water spray should be able to
adjusted.
4. Hard glass fiber,can be repeatedly sterilized in high
temperautre and pressure.
Product Scope:
Only used for drilling, molar of stomatology clamping high-speed
dental burs.
HPA012(N) Handpiece we Provide Two Kind Of Head For Choice
HPA012(N)S | HPA012(N)T |
Standard Head | Torque Head |
Environmet-friendly fiber opitic handpiece tube:
If the dental unit don’t have the optical fiber system,please
insert our optical fiber tubing and electricity borad in the dental
ubit,
then it can use our optical fiber handpiece and inclube the high
speed handpiece which compliance with international standards.
Electricity board:
1.Power in:12-24VFIBER OPTIC HANDPIECE
2.Power out:2.5-3.5V(adjustable)FIBER OPTIC HANDPIECE
3.Output delay:0-12s(adjustable)
4.Linkage air pressure:P>0.2Mpa
5.Control ways:2 ways
Maintenance:
1. Considering safety first, please be careful to use it with full
attention.
2. Be limited to dentists who held the dental treatment
qualifications.
3. Strictly forbid decomposition and reconstruction by
unauthorized.
4. Please run point testing on outside of patients oral beforehand.
If feel anomalies, please stop using immediately and contact with
our after-sales center.
5. When appears abnormal during using, please stop it immediately
and contact with our after-sales center.
6. It will cause a high noise using a center-vibration or bended
bur and a handpiece of which bearing has been worn, A long time in
this state will be harm to people’s hearing. Forbid using a
vibration or bended bur, if appear high noise, please replace the
shaft core early
Our Services
* Quick response:Your inquire or message will be replied promptly;
* High quality:Quality is our first pursuit,the product you buy is
same as description,your product will be strict quality control
from material,producing,inspection and packing;
* Fast shipping:Your products will be shiped in time as contract by
DHL/UPS/FEDEX/TNT or by sea;
* After sale service:Our sales will update you about
shipping,deliverying,also follow the installation,make sure the
product works well;Will also supply fast solution if any problem.