Resin Material Dental 3D Printer 1.5KW Rated Dissipation Zero Noise Eco - Friendly

Eco - Friendly Resin Dental 3D Printer 1.5KW Rated Dissipation Zero Noise

The same is to correct the teeth, invisible braces have gradually replaced the wire braces, becoming the mainstream choice for consumers. If you want to have orthodontics, you will not hesitate to choose invisible braces. After all, the image and feel of the full-mouth wire is really horrible, and the invisible braces are transparent, smooth and easy to care.

Invisible braces are a new 3D stereoscopic computer technology, tailored to a series of almost invisible transparent braces to complete the entire correction process. Whether it is due to crowded teeth, gaps, or teeth that are displaced after traditional treatment, you can definitely regain a bright smile.

What you should know is that the 20-year history of invisible braces is based entirely on 3D printing. The maturity of 3D printing technology provides precision prototypes for invisible braces, and the invisible braces have reliable technical support. Only 3D printing can guarantee low cost, high precision and high efficiency. Therefore, the demand for 3D printers in the dental industry is also increasing. Next, Jinshi 3D reveals the process of making invisible braces.

Wire braces and invisible braces

1. The doctor takes a picture of the patient's teeth, takes a CT piece, and acquires the initial model of the tooth by occlusion. According to the model, the computer obtains 3D data and obtains a specific correction plan through specific orthodontic software.

Dynamic demonstration of orthodontic 3D program

The figure above shows the different forms of orthodontics. There is a slight difference between each form. One millimeter of correction often has to be corrected ten times, which means that the accuracy of the braces must be as high as 0.1 mm or more. Every small mistake will affect the accuracy of the braces, otherwise the patient will not be able to get a good correction. The use of CNC cannot guarantee accuracy, and it is more unrealistic to use manual repair, which will cost a lot of money.

3D printing dental mold

2. According to the 3D data obtained by different forms of orthodontic treatment, the dental model is made by using the Jinshi 3D printing equipment, and then the corresponding invisible braces are produced according to the 3D printing dental mold, and the complete personalized dental correction program corresponding to the patient is implemented.

A patient's orthodontics often requires dozens or even hundreds of invisible braces, and each pair of braces is personalized. With the KINGS light-curing 3D printer, it is possible to mass-produce dental molds in batches. The patient's tooth data is obtained on the same day, and all tooth models can be made the next day. In the process of cooperation with the invisible braces factory, Jinshi 3D developed high temperature resistant raw materials to ensure that the 3D printing dental mold will not be deformed during the production of invisible braces. This not only saves huge costs for invisible braces manufacturers, but also increases efficiency by more than 10 times.

So, what is the process of making invisible braces? A brief summary is the steps: initial diagnosis of teeth, modeling, modeling, determination of dynamic corrections, design of dental model 3D data, printing of dental models, and production of invisible braces. The step of printing the tooth model is done by a 3D printer, and it can be said that it is difficult to produce invisible braces without a 3D printer.

3D printing mass production tooth model

Shenzhen KINGS 3D Printing Technology Co., Ltd. is a high tech enterprise which leads 3D printing technology. It’s devoted to marketized application of 3D printing technology, and provides enterprises with effective and scientific three dimensional printing comprehensive solution.

As a leading brand of industrial 3D printer, KINGS not only owns a R&D and manufacturing base for 3D printing machine and printing material, but also provides professional customized 3D printing service. KINGS entered into 3D printing industry in 2008 and has been growing rapidly. In 2012, KINGS established its production base of 3D printers in Shanghai. In 2016, KINGS established a standardized and large-scale production base of 3D printer in Bao’an District of Shenzhen city, and started its diverse research and production of 3D printing materials.

KINGS is the first 3D printing enterprise that made a great breakthrough in shoe mould industry. Both our application of high toughness material and “one key shift STL” pioneer in the industry, which greatly lowers the developing cost and improves the efficiency of shoe mould. Likewise, KINGS is also devoted to helping clients solve important needs of industries, which includes prototype, model, medical treatment, automobile, light-fixture, musical instruments, architecture and ceramic sanitary ware, etc., organizing professional R&D team to make breakthrough across all industries.

The laser 3D printers researched and developed by KINGS belong to industrial rapid prototyping machines. Based on SLA UV-curing technology, the printers scan liquid photopolymer resin by laser to cause photosensitive reaction and consequently layer-by-layer curing molding. Over the years, KINGS 3D printers have been well received by thousands of enterprises in both the domestic and oversea market.

KINGS has established massive marketing and service channels. KINGS not only assigns professionals to provide operation training service to clients, but also send after-sales service specialist to client’s location to provide onsite service, including machine installation, adjustment and maintenance.