Water Based alkyd emulsion WL-0310

Water based alkyd resin WL-310 is a modified alkyd emulsion diluted with water neutralized by ammonia, containing a small amount of co-solvent. This product reduces the content of organic volatiles (VOC) on the coating surface by mixing acrylic dispersions with alkyd emulsion. Meanwhile, it combines the characteristic of fast drying, yellow resistance of acrylic with the good film performances of alkyd resin (including high gloss, excellent salt fog resistance).

Due to good flow and levelling, coating made of WL-310 can be applied by spray, roller, brush or dipping. It is recommended to use in high performance protective coating and steel structure coating for indoor and outdoor metal equipments, can be used as primers and topcoats.

Features:

● Good storage stability,no ease to hydrolyze;

● Environment friendly product,VOC of less than 7%;

● Fast dry,and excellent gloss;

● This product contains drier,so it is unnecessary to add drier during paint preparation;

● Excellent shear stability,and can directly use for pigment paste grinding;

● Excellent anti-corrosivity,and good initial water resistance;

● The finished product paint has good versatility and good in-can appearance,and can replace oil based alkyd anti-rust paint,alkyd ready mixed paint,alkydenamel,etc

Technical Index:

Product Type:fast dry modified alkyd resin

Emulsion Composition:Water based alkyd resin,cosolvent,neutralizer,water

Viscosity:500-1000mPa.s

Non-Volatile Matters:42±2%(GB/T 1725)

PH value:8.0-10.5

Appearance:white to light brown emulsion

TVOC:≤5%(g/L)

Instructions:

1. This product has excellent shear stability,and can directly be used for pigment paste grinding.

2. Water based drier has been added to this water based alkyd emulsion.The drier consumption is 5%-1%of solid content of the emulsion.

3. It has good compatibility with other water based emulsions.

4. This product can be directly grinded with pigments and fillers,but it is necessary to perform the compatibility test because different acidic or basic pigment fillers may be used.

5. It has excellent rust resistance in the primer,especially under action of antirust pigment.The best filler is talc powder or kaolin.Calcium carbonate is avoided.

6. The finished product paint must be stored under alkaline condition,at pH between 7.5 and 8.5.The pH value can be adjusted by ammonia water,triethylamine or N,N dimethyl ethanolamine(DMEA).

7. Before use,the product can be diluted by deionized water.Tap water can also be used after passing the test.

8. This product has high gloss and anti-corrosion performance,and can be used for preparation of enamel,mixed paint and antirust primer.

Storage

The product should be stored in a cool place below 38℃,and protected from freezing in winter.Its shelf life is 6 months,and the expired products still can be used if passing the inspection

Varnish Basic Properties

Established in 2010, Xiamen WangQin Chemical Technology is a professional corporation specializing in researching, developing manufacturer for different resin products. With a staff of 50 people, WangQin has been equipped with advanced manufacturing facilities and a full range of product testing equipment to assure and maintain ISO9001 of Quality Management System. With more than 10 years’ development, WangQin has become a leading supplier in resin industry for both domestic and overseas market.

With annual production for both water-borne and oil resin total up to 20,000 tons, WangQin has been able to offer both general resin products and also customer – tailored coating products for different market application. So far, the application has covered to almost all industry sectors and domestic sectors.

As a privately-owned company, WangQin adheres to the following core value to make sure the company goes into the right path as planned.

• Personal and Professional working relationships
• Complete trust and respect for each person on our team
• Innovation and Quality is our business

By referring the above guideline, WangQin also has a specific focus to following communist party’s headline, targeted at “ The Belt & Road “ ( B&R) for long term development.

WangQin will continuously commit to the Research and Development of Industrial Resins in our engineering and Manufacturing. We will be making every necessary effort to offer environment friendly and customer oriented products to the high quality expectations of our present and future clients.