Add to Cart
63ton 2500 steel plate bending machine wrought iron bending machine stainless steel sheet bending machine
Standard configuration:
1. Main Features:
1. Totally EU streamlined design,Monoblock by welding robots & aparatus and stress relief process by Annealing treatment.
2. Hydraulic synchronised positive stop design,and by Etsun NC programmable controller assuring accurate repeatability &ease of use.
3. Integrated hydraulic system(Bosch-Rexroth form Germany)allowing rapid approach switching automatically to slow bend.
4. Inverter with E21 NC System operated back gauge with quality support fingers also with vertical adjustment
5. Inch, single mode being designed for the machine and reversing and maintain time can be controlled by the time relays.
6. Safe fence and the electric inter locker have been designed for the machine to ensure the operation safety
2. Standard Equipment:
- Estun E21NC control System
- Powered Depth Y-axis&Back gauge X-axis
- DELTA Inverter controlled back gauge
- HIWIN Ball screws & Polished rod with 0,05mm accuracy.
- Plate Support Arms
- Germany Bosch-Rexroth Hydraulic
- Germany EMB Tubing connector
- Germany Siemens Main Motor
- Tele mecanique/Schneider Electrics
- Hydraulic &Electrical overload protection
- Top and Bottom Tooling(86°,R0.6mm)
- Safety Standards(2006/42/EC)
Features
1. Hydraulic / Mechanical ram, synchronised positive stop design,
ram stroke controlled by precision mechanical nut depth stops built
into each cylinder. Electronically controlled by Estun NC-E21
Programmable digital control assuring accurate repeatability.
2. Parallelism is ensured by torsion bar that can be easily
adjusted by clutch system.
3. Estun NC-E21 programmable digital control stores up to 40 unique
programs with 25 automatic progressive bending steps in each
individual program, assuring production accuracy &
repeatability every time.
4. Estun NC-E21 programmable hardened ballscrew back-gauge system,
simply enter the desired measurement into the controller and press
go, the backgauge then will move quickly into the position you have
requested. The superior hardened ballscrew system eliminates any
backlash that leadscrew type machines produce.
5. Segmented heavy duty 86° offset top punch is segmented for
return bend clearance, complete with European style punch holder
with an adjustable wedge clamping system for crowning. Intermediate
clamp has safety key to stop punch dropping.
6. Multi vee ('V') bottom die is made from one 3200mm solid die
block design to handle heavy plate, safety edge vee ('V') is
incorporated in bottom die block.
7. Conveniently mounted control box on pendant for quick swivel and
adjustments.
8. Mono-block steel frame design, welded then machined to ensure
minimal bed deflection under load
9. Enclosed rear gate with micro safety switches complete with
sliding rear door for easy access.
10. European Intermediate clamping system, allowing operator to
change position of tooling to suit multiple requirements on complex
applications. This feature ensures minimum down time, more
productivity and results in reduced cost per finished product.
11. Sliding steel fabricated sheet supports enabling a wide range
of material sizes to be aligned and supported at the correct
required height. This feature is achieved with a "T" slot machined
down the total length of the die bed sheet supports are also
adjustable vertically to assist in supporting material with return
bends already folded.
12. Adjustable sliding blocks control the machines beam to provide
desirable open height distance to the (slow speed) mute bending
point. Operator adjustable locking knobs for quick adjustment,
enables accurate repeatability and increased productivity.
13. Metal safety guarding surrounding the machine with rear sliding
door fitted and micro switch ensuring operator safety. Clear access
panels placed at each end of machine allows the operator to clearly
view tooling and work piece during bending operation.
14. Hydraulic MPA pressure gauge mounted on right side of support
frame with quick adjusting pressure control knob allowing operator
to accurately set the pressure required for different material
thickness, incorporating with hydraulic overload protection.
15. Welded steel fabricated synchronised torsion bar horizontally
supporting main bending beam to provide consistent parallelism that
also can be adjusted for taper correction.
16. The vertical supporting slides are treated to provide greater
ware resistance and increased accuracy.
17. Reinforced side frames providing addition support strength to
machine throat
18. Mild steel capacity is rated on hot rolled material with 250MPA
WC67Y/WC67K Series Technical Parameters
Model | Nominal pressure (mm) | Worktable length (mm) | Distance between housings (mm) | Throat depth (mm) | Stroke (mm) | Max. opening height (mm) | Power (KW) | Dimension LxWxH (mm) |
30T/1600 | 300 | 1600 | 1280 | 200 | 80 | 285 | 3 | 1600x1000x1600 |
35T/2000 | 350 | 2000 | 1480 | 200 | 80 | 285 | 4 | 2000x1100x1800 |
40T/2200 | 400 | 2200 | 1850 | 230 | 100 | 320 | 5.5 | 2200x1200x1910 |
40T/2500 | 400 | 2500 | 1850 | 230 | 100 | 320 | 5.5 | 2500x1200x1910 |
50T/2500 | 500 | 2500 | 1850 | 230 | 100 | 320 | 5.5 | 2500x1200x2000 |
63T/2500 | 630 | 2500 | 1900 | 250 | 100 | 320 | 5.5 | 2500x1300x2210 |
63T/3200 | 630 | 3200 | 2500 | 250 | 100 | 320 | 5.5 | 3200x1300x2210 |
80T/2500 | 800 | 2500 | 1900 | 300 | 100 | 320 | 7.5 | 2500x1400x2300 |
80T/3200 | 800 | 3200 | 2500 | 320 | 100 | 350 | 7.5 | 3200x1500x2300 |
80T/4000 | 800 | 4000 | 3000 | 320 | 100 | 350 | 7.5 | 4000x1500x2400 |
100T/2500 | 1000 | 2500 | 1900 | 320 | 120 | 320 | 7.5 | 2500x1600x2400 |
100T/3200 | 1000 | 3200 | 2500 | 320 | 120 | 370 | 7.5 | 3200x1600x2600 |
100T/4000 | 1000 | 4000 | 3000 | 320 | 120 | 370 | 7.5 | 4000x1600x2700 |
125T/3200 | 1250 | 3200 | 2500 | 320 | 120 | 370 | 7.5 | 3200x1600x2600 |
125T/4000 | 1250 | 4000 | 3000 | 320 | 120 | 370 | 7.5 | 4000x1600x2700 |
160T/3200 | 1600 | 3200 | 2500 | 320 | 200 | 460 | 11 | 3200x1700x2700 |
160T/4000 | 1600 | 4000 | 3000 | 320 | 200 | 460 | 11 | 4000x1700x2800 |
160T/5000 | 1600 | 5000 | 4000 | 320 | 200 | 460 | 11 | 5000x1900x3100 |
160T/6000 | 1600 | 6000 | 4940 | 320 | 200 | 460 | 11 | 6000x1900x3200 |
200T/3200 | 2000 | 3200 | 2500 | 320 | 200 | 460 | 11 | 3200x1950x2800 |
200T/4000 | 2000 | 4000 | 3000 | 320 | 200 | 460 | 11 | 4000x1950x2800 |
200T/5000 | 2000 | 5000 | 4000 | 320 | 200 | 460 | 11 | 5000x1950x3000 |
200T/6000 | 2000 | 6000 | 5000 | 320 | 200 | 460 | 11 | 6000x1950x3300 |
250T/3200 | 2500 | 3200 | 2500 | 400 | 250 | 590 | 18.5 | 3200x2000x3200 |
250T/4000 | 2500 | 4000 | 3000 | 400 | 250 | 590 | 18.5 | 4000x2000x3400 |
250T/5000 | 2500 | 5000 | 4000 | 400 | 250 | 590 | 18.5 | 5000x2000x3400 |
250T/6000 | 2500 | 6000 | 5000 | 400 | 250 | 590 | 18.5 | 6000x2000x3400 |
300T/3200 | 3000 | 3200 | 2530 | 400 | 250 | 590 | 22 | 3200x2000x3450 |
300T/4000 | 3000 | 4000 | 3000 | 400 | 250 | 590 | 22 | 4000x2000x3450 |
300T/5000 | 3000 | 5000 | 4000 | 400 | 250 | 590 | 22 | 5000x2000x3450 |
300T/6000 | 3000 | 6000 | 5000 | 400 | 250 | 590 | 22 | 6000x2000x3450 |
400T/4000 | 4000 | 4000 | 3000 | 400 | 250 | 590 | 30 | 4000x2180x3400 |
400T/5000 | 4000 | 5000 | 4000 | 400 | 250 | 590 | 30 | 5000x2180x3500 |
400T/6000 | 4000 | 6000 | 5000 | 400 | 250 | 590 | 30 | 6000x2180x3800 |
500T/5000 | 5000 | 5000 | 4000 | 400 | 250 | 590 | 45 | 5050x3500x3700 |
500T/6000 | 5000 | 6000 | 5000 | 400 | 320 | 590 | 45 | 6050x3500x3700 |
600T/4000 | 6000 | 4000 | 3000 | 400 | 320 | 590 | 55 | 4050x4500x3700 |
600T/6000 | 6000 | 6000 | 5000 | 400 | 320 | 590 | 55 | 6050x4500x3700 |
800T/6000 | 8000 | 6000 | 5000 | 400 | 320 | 590 | 55 | 6300x4500x6000 |
Note: No notice if any changes of the above statistics made.