Add to Cart
Cold Welding CNC Small Size Transformer Foil Winding Machine With Copper And Aluminium Strip
Description
Cold Welding CNC Small Size Transformer Foil Winding Machine With Copper And Aluminium Strip BRJ200 can be used to wind foil coil with maximum height 200mm. This kind machine is provided with coil pressure welding. Comparing with TIG, cold pressure welding can be used to weld not only cu foil and cu bar or al foil and al bar together, but also cu foil and al bar or al foil and cu bar together. According to the total thickness of the foil being welded, six pieces of molds are provided. Moreover, a grinding unit also is provided for cold pressure welding. It is easy to operate.
Main Components
1. Main frame, steel welded frame
2. Foil decoiler, one decoiler with 250mm width
3. Rectifying sensor, for correcting the position of the foil when winding
4. Pressing roller
5. Main winding unit for winding foil
6. PLC based control system, control the machine precisely
7. Pneumatic system
Technical Parameters
Typical standard specifications of BRJ200 are shown below, however these can be easily modified as requested.
Foil width: | 100 ~ 200mm |
Finished Coil Shape: | Oval, circle, and rectangular etc. |
Conductor Material: | Copper or Aluminum foil |
Al Foil Thickness: | 0.3 ~ 3.0 mm |
Cu Foil Thickness: | 0.2 ~ 2.0 mm |
Foil Decoiler Number: | 1 pc |
Foil Decoiler Length: | 250 mm |
Foil Decoiler Diameter: | Adjustable range 400-520mm |
Max Coil Weight: | 750 KG |
Pressing Roller: | 1 set |
Tension Mode: | Pneumatic |
Speed Adjusting Mode: | Stepless adjustable |
Winding Speed: | 0~35 rpm |
Insulation Decoiler Number: | 1 pc |
Insulation Decoiler Width: | 250mm |
Insulation Decoiler Shaft: | Expandable (pneumatic open/close action) |
User Interface: | 10inch (254mm) touch screen |
Counting Turn Range: | 0 - 9999.9 |