Add to Cart
Siding panel applied in house ,office building, villa, and wall
protection. Due to its top layer covered with PVC, ASA, or PMMA,it
can be used in hot, cold dry or wet place, can bear long time sun
light ,wind, rain and bad weather.This line can be equipped with
different pattern rollers, easily changeable.Special designed
calibration unit and good processing experience can make operation
easy and extend its life. Punching on-line , it is more economical
way. As per customer’s requests, it also can be equipped with
rolling machine,printer, coding machine and so on.
Related Products
The production line can produce the PVC Plastic-wood door of the
width between 600 and 1200. The device has SJZ92/188 conical
twin-screw extruder, calibration, hall-off unit, cutter, such as
stacker, targeting the advanced equipment, well-produced, the main
electrical control devices are well-known global brands, extrusion
system design imbibes the technic of foreign country in this line,
and it has a highly dependability and weariness. The other scheme
have two types: it’s supply for the custom to choose: YF1000 and
YF1250.
This pelletizing machine is composed by a conical twin-screw
extruder and the correspondingly pelletizing downstream equipment,
it is suitable for the pelletizing of PVC, PE raw materials with
wood powder or other additives. The pellets produced by this
machine is evenly, solid, elegance. The pelletizing downstream
equipment is the die face cutter, air transferring unit, vibration
separating and cooling unit. This pelletizing downstream equipment
has the features of high automation and high production efficiency.
1.Building block type screw and barrel of the extruder, according
to the L/D by yourself. It’s fit for all kinds of the material
machining for the surface wearable. The temperature of barrel can
enactment by oneself each zone.
2.The method of the head cutting is heating cut commonly.
3.The method of cooling remove the material is two class or three
class fan remove commonly.
PE&PP Wood-Plastic Two Step Extrusion Line
Two-step way is that the wood-plastic composite materials complete
in different equipment of mixing, from play, extruding products,
mixing the raw material in a certain formula, forming wood-plastic
particles in the middle, and then squeezing out products. And
nowadays, the two-step way is used currently, application of a
wider general use dual-cone-or two-extruder granulation, and then
double-cone or single screw extruder extrusion products, mainly
used in floor indoor or outdoor,parapets, tray, such as PE plastic
extrusion products. Because of the advantages: simple operation,
lower requests to the overall technological level and to the
matching mold and extrusion equipment than the one-step, and also
smaller investment on equipment relatively.
The production line is mainly used for the production of the Great
Wall panels, wall panels, partition walls, pinch plate, acoustic
panels, stair railing, shutters, decorative, foot line and any
other eco- wood plastic productions. The extruder with the unique
screw design prevents raw material from high shear or over
plasticizing, As a result, products gain significant texture of
wood surface, and product with characteristics: no deformation,
non-fading, fire prevention, anti-corrosion, anti-moth, anti-aging
and anti-UV.
This extrusion line mainly contains conical twin screw extruder
、glue extruder 、vacuum calibration unit 、haul-off unit 、cutter and
stacker. It adopts intelligent control system, high automatic
system, with feature of stability, easy operating and high
efficiency. By changing different types of mold, it can produce all
kinds of fast loading wallboard with different types, sizes,
shapes, thickness. With rich production experience, JWELL can
provide on-site installation and debugging services freely,
including operation train and raw material formula, to insure the
customer can operate autonomously.
Sander
This machine suits for the thickness sanding, fine sanding and
polish the
surface of other various boards.
Transfer printing machine for door
The machine is used for surface design transferring of wood-plastic
door,wood-plastic cabinet door board, PVC door and wall board.
Using high temperature transferring, this machine can automatically
remove dust and have board pre-heating device.
WPC embossing machine
The wood-plastic embossing is mainly used for the pattern of
repression of PEPPPVC wood plastic profile,sheet surface,it's
better for the wood products surface of wood texture.the surface of
the embossing can be processed all kinds of wood texture,surface
can be hard chrome plating,Roller cavity heating,simple operation
and wear-resistant.
Suitable for testing kinds of material and products. Under the
climate changes of sunshine, temperature, humidity, condensation
etc, In order to test related products and material aging degree.
In a short time get discoloration, fading and so on.
Mainly used in testing the impact toughness of hard pla4stic sheet,
pipe, profile, enhance nylo4n, glass, steel, ceramics, cast stone,
electr4ical insulation, and other non-metalli4c materials.It is the
ideal test 4equipment for chemical industry,
scientific research units, universities and colleges, quality
inspection departments and professional manufacturers.
It allows for the measurement of melt mass-flow rate (MFR) and melt
volume-flow rate (MVR), melt density test, not only suitable for
the high melting temperature engineering plastics, but also for low
melting temperature plastics. It is widely used in chemical
industry, scientific research units, universities and colleges,
quality inspection departments.
Brief Infomation of JWELL MACHINERY CO., LTD
Founded in Shanghai, China 1997,has developed into 5 production
bases including Shanghai, Suzhou, Changzhou, Zhoushan and Guangzhou
with more than 1000mu area,which is the largest plastic extrusion
manufacturer in China with 18 professional subsidiaries, 9 big
metal-working workshops and 4 big heat-treatment nitration
workshops. JWELL MACHINERY (CHANGZHOU) CO., LTD. is another
development strategy center of Shanghai JWELL Machinery Co.,ltd,
locating at Jiangsu Zhongguan cun technology industrial park,
Liyang city, Jiangsu province and has a high qualified R&D and
experienced mechanical and electrical engineer team as well as
advanced processing foundation and normative assembly shop.
Jwell is the largest plastic extrusion manufacturer in China with
18 professional subsidiaries, 9 big metal-working workshops and 4
big heat-treatment nitration workshops. Production capacity:20
set/sets per Month.We can provide on-site installation and
debugging services freely, including operation train and raw
material formula , to insure the customer can operate
autonomously.Warranty:12 months.
Jwell hot sale PE & PP wood plastic composite extrusion line
Jwell PVC (WPC) fast loading wallboard extrusion line
Jwell PVC(WPC) Co-Extrusion Foam Board extrusion line9
Welcome to Jwell!