Add to Cart
96 Port 144 Port MPO Fiber Optic Cable in 1U 19" MPO Rack Mount
Patch Panel
Description:
1U 19" High Density MPO MTP rack mount Fiber Optic Patch Panel
manufactured by ANC International Co., Limited is mainly used for
high density fiber optic cabling system, fast wiring system, main
network, high integration equipment & devices, data center, SAN
system etc. This MPO MTP patch panel are made to meet the demand of
high density fiber cable management products, it reduce space,
reduce deployment time, easy to use and plug to play. The front
panels can be custom made. Inside the MPO/MTP fiber patch panels,
MPO MTP cassette or blank adapter plate can be pre-installed before
shipping. Typically, the MPO MTP Cassette are installed with
MPO/MTP to LC harness cables and adapters, we also have SC/ST/FC
adapters and cables, in single mode and multimode versions, UPC and
APC polished ones.
Using a high-density fiber patch panel comes with many advantages. Along with saving precious space, it also simplifies cable deployment by not needing to run jumpers across the room or under the floor and instead by just simply running a short fiber patch from your network switch up to the panel enclosure. High-density fiber patch panels will give you the highest level of scalability and density. Offering a cost-effective solution and seamless distribution for bandwidth from 10G, 40G, to 100G.
Except 1U patch panel, ANC has also 2U, 3U rack optional to meet higher density demands.
Features:
Upto 96 Fiber or 144 Fiber LC Ports in 1U
Standard loss and low loss MPO MTP optional
LC and SC Fiber Adapters Available
Plug and play, easy to install and remove
SM, OM1, OM2, OM3, OM4, OM5 fiber optional
MPO cassette has 12-fiber(12MPO) and 24-fiber(24MPO)
configurations.
19" Standard Size, Light Weight and Robust Structure
Changeable Modules Inside
Suitable for both Ribbon and Round Cable
Improved design to ensure fiber optic cable bend radius not less
than 40mm
Powder Coated
Applications:
Data Center
Fiber optic cabling system
Main Network
Optical Performance:
MPO/MTP | SM Standard | SM Low Loss | MM Standard | MM Low Loss | |
Insertion Loss | Typical | 0.35dB | 0.20dB | 0.35dB | 0.20dB |
Max | 0.75dB | 0.35dB | 0.65dB | 0.35dB | |
Return Loss | APC≧50dB | ≧25dB | ≧35dB | ||
PC≧40dB | |||||
Durability | ≤0.3dB (change 500matings) | ≤0.3dB (change 1000matings) | |||
Exchangeability | ≤0.3dB (Connector randomly) | ||||
Tensile Strength | ≤0.3dB (Max 66N) | ||||
Vibration | ≤0.3dB (10~55Hz) | ||||
Operation Temperature | -40℃ ~ +75℃ |
Generic Connector Performance:
LC, SC, FC, ST Connector | Singlemode | Multimode | |
UPC | APC | PC | |
Maximum Insertion Loss | ≤ 0.3 dB | ≤ 0.3 dB | ≤ 0.3 dB |
Typical Insertion Loss | ≤ 0.2 dB | ≤ 0.2 dB | ≤ 0.2 dB |
Return Loss | ≧ 50 dB | ≧ 60 dB | ≧ 25 dB |
Operating Temperature | -40℃ ~ +75℃ | ||
Test Wavelength | 1310nm | 850nm |