Pre - Terminated Fiber Optic Patch Leads , Customized FTTH Drop Cable With Pull Leg

Pre-terminated FTTH Drop Cable with Paper Spool and Pull Leg in Various Length

Description

Pre-terminated FTTH Drop Cable with Paper Spool and Pull Leg manufactured by ANC International Co., Limited has customized SC, SC/APC, LC/PC, FC/PC etc connectors on both ends. The length of the FTTH drop cable is 20m, 25m, 30m, 50m, 70m, 100m or other customized length. This FTTH drop cable has pull leg on the open end of the cable, thus cable can easily be pull out during installation without damage of connector or cable. Fibre to the home (FTTH) is the installation and use of optical fibre to provide high-speed broadband access to individual buildings such as businesses or single-family units (SFUs) which are freestanding residential buildings, or multidwelling units (MDUs) such as apartment buildings. Before deploying a FTTH network, providers must first decide whether to use a splice, which is a permanent joint, or a connector, which can be easily mated and un-mated by hand. This is for both ends of the drop cable – the distribution point and at the home’s optical network terminal (ONT) or network interface device (NID). Both splices and connectors are widely used at the distribution point. At the ONT/NID, either a field terminated connector or a spliced-on factory-terminated connector can be used.

The FTTH drop cable has two parallel Fiber Reinforce Plastic (FRP) strength members placed at the two sides and the 250um bare optical fibers are positioned in the center. This drop patch cord can be easily stripped and spliced, it can be simple installed and maintained. The cable is jacketed with black or white color LSZH sheath.

FTTH drop patch cord can be directly connected to the homes. It is suitable for connecting with communication equipment, and used as access building cable in premises distribution system.

Specification

Two parallel FRP strength members ensure good performance of anti-electromagnetic and crush resistance

Small Size (mm): 3.0*2.0 (1-2cores indoor) for indoor; 5.0x 2.0mm for outdoor ;

Bending loss (Bare Fiber) Radius: 7.5mm x 1 turn dB ≤0.5 at 1550nm

Novel flute design, easily strip and splice, simple installation and maintenance

Low smoke, zero halogen or flame retardant sheath

Low cost;

High return loss;

Low insertion loss;

Usage

FTTH access network.

Telecommunication Networks

CATV Networks

Data communications Networks

Local Area Networks

Technical Data

Outdoor Drop Cable Structure

Related Picture

ANC International Co., Limited is an experienced OEM & ODM manufacturer and supplier for fiber optic patch cord and pigtails, fiber optic adapters, attenuators, PLC Splitters, CWDM, DWDM, OADM, fiber switch, fiber isolator, circulator, SFP transceiver, media converter, fiber optic patch panel, termination boxes, fiber optic cleaners and tools in Shenzhen, China.

Established in year 2005, ANC has been growing with clients over pass 10 years. Right now, ANC has plastic and adapter production plant in Hangzhou, has patch cord & attenuator assembly line in Shenzhen. Its products have been selling to big companies in China and reputed clients worldwide.

ANC focus on fiber optic products only. It aims to provide high quality and low lost customized products to meet client request.

Contact Us:

Email: sales@ancfiberoptic.com; ancfiberoptic@vip.163.com;

WhatsApp/Wechat:13798591226

Fax: 0086 755 29407103

Zip Code: 518109

Office Address: 4F, Building 4, GuoLe Technology Park, LiRong RD, DaLang, LongHua Dist. Shenzhen, China

Factory Address: 4F, Building B, Zhangge Tech. Park, Dafu, Guanlan, Longhua, Shenzhen, China