Add to Cart
Big Capacity Poultry Feed Making Machine Animal Feed Processing
Equipment
Introduction of Poultry Feed Making Machine
This series ring die pig feed making machine can not only produce
feed pellets for pig, but also can produce feed pellets for
chicken, cattle, duck, rabbit, etc.
Related machine: hammer crusher and feed mixer.
Main Parameters of Ring Die Pig Feed Making Machine:
Model | Capacity (t/h) | Power (kw) | Feeding Power (kw) | Conditioner Power (kw) | Weight (kg) |
SZLH250 | 1-2t/h | 22kw | 0.55kw | 1.5kw | 1000kg |
SZLH320 | 3-5t/h | 37kw | 1.5kw | 2.2kw | 2500kg |
SZLH350 | 5-8t/h | 55kw | 1.5kw | 3.0kw | 3500kg |
SZLH420 | 8-12t/h | 110kw | 2.2kw | 7.5kw | 4200kg |
SZLH508 | 12-18t/h | 132/160kw | 2.2kw | 11kw | 5100kg |
Features of Ring Die Pig Feed Making Machine:
1. Host bearings generally use the top ten brands in the world of
NSK (Japan), SKF (Switzerland) bearings, reliable quality, long
service life!
2. In the rear of pellet machine has the protection switch device ,
when the spindle bearing and spindle lock, the power can be cut off
in time, the spindle has an effective protection effect!
3. Feeder spindle, screw, sleeve, paddle are 304 stainless
steel,bearing is SKF brand,longer life.
4. The gap between paddle and the bottom is less than 4mm, the
material basically no residue, no manual cleaning residue,but other
manufacturers is generally 8-10mm, more material leftovers, If the
labor can not be timely clean-up, material cross-contamination, if
for a long time production is also easy to pests!
5. Conditioner spindle, paddle, bolt ,wall tube are 304 stainless
steel, Conditioner paddle stainless steel castings, bolts fixed
installation, angle adjustable, but other factory is welding, the
angle can not be adjusted. Conditioner can be adjusted by adjusting
the paddle then adjust the material to stay time in conditioner.
This is the welding pad can not do!
6. Pellet machine door with 304 stainless steel, other use ordinary
carbon steel, pellets from the machine high temperature, moisture,
ordinary carbon steel life is generally about six months, and The
service life of stainless steel is long-term!
7. Door cutter with a graduated mark can be more accurate
regulation of the pellet length, the other manufacturers generally
do not have the mark of the cutter!
8. Holder, the ring die, roller high-strength alloy forged pieces,
the CNC machining heat treatment, high precision, high strength and
long service life.
Poultry Feed Making Machine Pictures
Service
1. Provide the free consultation of the equipment.
2. Provide the standard device and the flow chart.
3. According to the clients' special requirement, offering the
reasonable plan and free design helping to select the equipment.