Vacorda magnetic float ball level gauge consists of reed, precise resistance and amplification
transformation circuit and adopt imported advanced sensor
components and signal transmitters. When the magnetic line of the
magnetic float ball reaches a certain place of the level sensor,
the reed closes, and the float ball changes with the height of
level interface. The amplification transformation circuit converts
the change of the interface height into linear 4~20mADCsignal to
realize the measurement and transmission of the level location
1. Simple structure, good stability and reliability.
2. Independent of medium’s physical and chemical states such as
conductivity, dielectric constants, foam etc.
3. Appliable for all kinds of medium environment such as corrosive,
toxic and explosive one.
4. Interface measurement or level measurement of 2 kinds of medium
with different density.
5. Two-wire 4~20mADC signal output, 0.8’’ or 0.56” LED digital
6.Explosion-proof structure design for exploding environment
|Measuring range||200~6000mm(>6M customize)|
|Working power supply||16~30VDC|
|Pressure||PN2.5~PN160(×0.1MPa)(Max pressure PN320)|
|Operating temperature||-40 ~ 80 °C, ≤120 °C, ≤150 °C|
|Float ball diameter||Φ30~Φ120(depending on pressure and density)|
|Flange installation||DN40~DN150/RF/PL(HG/T20592~2009) customize|
2'' thread(downward install)
1/2'' thread (upward install, resistance signaloutput)
3/8'' thread(upward install, resistance signal output)
M20×1.5 female thread
Three-lines screening cable
|Explosion-proof grade||Exia II CT6Ga,EXd IICT6Gb|