Hydraulic excavators are used for a wide variety of applications,
the most notable being excavation. They are also capable of being
used for demolition purposes, however, as even the smallest models
are more than capable of demolishing buildings. Hydraulic
excavators are also commonly used for moving large amounts of
materials, such as minerals, from one area to another. Hydraulic
excavators are usually used in conjunction with bulldozers and
loaders for construction purposes.
Sinoway hydraulic excavator has been tested, re-designed and then
re-specified after market proved, and finally built to withstand
numerous applications. Reliable major components like Cummins
engine, Kawasaki hydraulics and our cutting edge technology to
produce hydraulic excavators are the reasons why Sinoway excavator
lasts. Through our crawler excavator category, starting with 0.05
m3 bucket up to 2.0 m3, you will fine one fits your requirement.
Updated-design negative flow control hydraulic system provides the
actuator of the crawler excavator with high response.
Electronic throttle control enables you to select different control
modes according to different loads during operation for high
efficiency and energy reduction.
The hydraulic excavator is outfitted with a high-quality Kawasaki
pump and a priority valve to achieve extremely high efficiency.
An intelligent electronic monitoring system is used for the
real-time supervision of the system conditions, enabling the
excavator to be maintained easily.
The fuel system is constructed using a high-capacity oil water
separator and a tertiary filtration system.
The driver’s cab offers the advantages of a beautiful exterior,
large space, a wide viewing angle and superb ventilation
conditions. Its silicone-oil damper is ergonomically designed.
Adopting an air-conditioning system offers a comfortable operating
|Type||Four-cylinder,water-cooled, turbocharge,mechanical injection|
|Main Technical Specification|
|Standard bucket capacity||0.6m3|
|Stick digging force||65.3KN|
|Bucket digging force||91.8KN|
|Max. cutting height||8780mm|
|Max. dumping height||6390mm|
|Max. digging depth||5470mm|