Portable Digital Peak Voltmeter Fibre Glass High Voltage Discharge Rod

Fibre Glass High Voltage Discharge Rod , DC Discharge Stick , High Voltage Test

I. Product Introduction

FKDS series DC discharge rod is the use of new insulation materials processing. It has elongated, shrinkage characteristics. Portable telescopic rod model is easy to use in the outdoor high voltage test, especially in DC voltage test, to test the charge accumulation, to discharge, to ensure personal safety using the discharge rod discharge, is to ensure that the necessary for each test of the personal safety of the weapon. Portable telescopic rod is easy to carry, convenient, flexible, has the advantages of small volume, light weight, safe and reliable, is a safe tool of high voltage staff lack.

II. Optional class

• FKDS-10KV : discharge voltage range 0-50KV
• FKDS-35KV: discharge voltage range 0-100KV
• FKDS-110KV: discharge voltage range 0-200KV
• FKDS-220KV: discharge voltage range 0-500KV

III. Using way (for example FKDS-10KV)

1. pull out the telescopic part of the portable telescopic discharge rod

2. the prepared grounding wire plug is inserted into the socket of the head end of the discharge rod, and the other end of the ground wire is connected with the earth, and the grounding is reliable

3. discharge should be completed after the test, the DC generator control box booster knob back to zero, at this time can observe the control box of the voltmeter voltage drop to 15KV ~ 20KV or so, can discharge

The

4. discharge should be the first to use the metal pointed front rod, go slowly on into disconnected power supply test samples. At this time the discharge rod release electricity is after discharge resistance of discharge. Then the discharge rod on the hook to hook the sample, second electricity.

IV. Attention

1. of the sample capacitor discharge, should be in after the test, disconnect the power after the test, you should wait for a period of time, the charge on the cylinder and the sample times by itself on the self discharge. This can be observed on the control box of the voltage meter voltage the gradual decline in the fall, when voltage meter down to a lower voltage, usually in 5Kv ~ 15Kv, available discharge rod to gradually move to the sample nearby. First through the air gap free discharge, then you can hear a hissing sound, when no sound, with a tip to touch the discharge rod test, finally test direct grounding discharge.

2.The magnitude of the accumulated charge of the 2. large capacitance specimens is proportional to the size of the sample capacitor and the applied voltage, and is proportional to the time

3. after a few kilometers above the high voltage cable test, the discharge time is generally very long, and need to repeatedly discharge. Resistance capacity is large, need to order a large capacity of the discharge rod

4. is strictly prohibited without open test power to discharge the sample with the discharge rod.

5. strictly prohibit the use of foot and heavy extrusion rod, bending, breaking the discharge rod is strictly prohibited

6. prohibit the discharge rod damp, affect the insulation strength, should be placed in the dry place

V. Complete set of products

1. portable telescopic discharge rod 1

2. ground wire self matching

3. instructions for use 1

4. product qualification certificate 1

Founded in 2003, FANKE is the domestic leader specializing in designing and manufacturing HV test, measurement and overhaul equipments. In 2003, Wuhan HIGHVOLT Co.,Ltd is established as our subsidiary. We provide a diversity of complete testing solutions and one-stop service for electric power companies, electric research institutions and electric equipments manufacture companies.
Located in Guannan Science and Technology Industrial park-- the Optical Valley of China, we cover an area of 12,000 square meters used for workshop and offices.With the registered capital of 16,000,000 yuan, our annual sales volume reaches 70,000,000 yuan. As a sub-measurement unit of Wuhan city, we develop us as a comprehensive high-tech enterprise integrating research, development, production, installation, commission, sales and service consultancy.

Good networking keeps us stay advantageous and innovative in the market. Relied on the wide cooperation with institutions of higher learning in Wuhan, we establish a HV research center supported by professional HV engineers and specialists from Wuhan High Voltage Research Institute of State Grid, Institute of Water Conservancy and Hydroelectric Power of Huazhong University of Science &Technology and Wuhan University.

Our management team is composed of professional administrators with rich experience in modern business and project management and technical personnel specializing in HV, power transmission, transformation and automation. Until now, we employ 75 stable workers, 65% of whom have bachelor degree and some of the rest are advanced engineers and professional experts with Doctor degree.

We hold numerous intellectual property rights, utility model and invention patents for products, such as hydraulic integrated high voltage withstand test system, series resonant test trail, ultra high voltage AC/DC voltage withstand test equipment, power frequency PD free voltage withstand test equipment and other electric power maintenance equipments as well as other tailor-made products.
Our products have been applied for onsite handover, preventive maintenance and quality inspection test. We have customers all around the country, including stated-owned institutions and large-scaled enterprises in sections of railway, oil industry and chemical engineering. Some products have been exported to overseas markets, including USA, Mid-east, Korea, India and Vietnam, ect.

With a vision to win-win result, We will continue to focus on customer needs and rely on technical innovation, striving to become the top-ranking provider for electric testing and measurement equipments and EPC engineering service.