Simple Process Oxygen Producing Machine , O2 Oxygen Concentrator
For Welding
Working principle of industrial oxygen generator:
Pressure swing adsorption (PSA) method is a new oxygen technology
developed rapidly in 1970s. It is the air as raw material, using a
highly efficient, highly selective solid adsorbent - molecular
sieve to nitrogen and oxygen selective adsorption, the air nitrogen
and oxygen separation. Both nitrogen and oxygen have quadrupole
moment, but the quadrupole moment of nitrogen (0.31 A u65289X is
much larger than that of oxygen (0.10 A u65289X), so the adsorption
capacity of nitrogen on zeolite molecular sieve is stronger than
that of oxygen (the interaction between nitrogen and ions on
molecular sieve surface is stronger). Therefore, when air passes
through the adsorption bed equipped with zeolite molecular sieve
adsorbent under pressure, nitrogen is absorbed by the molecular
sieve. Due to less adsorption of oxygen, it is enriched in the gas
phase and flows out of the adsorption bed, so that oxygen and
nitrogen are separated to obtain oxygen. When the molecular sieve
adsorbs nitrogen to near saturation, stop the air and reduce the
pressure of the adsorption bed, the nitrogen adsorbed by the
molecular sieve can be desorbed, and the molecular sieve is
regenerated and reused. Oxygen can be produced continuously by
switching between two or more adsorption beds. The boiling points
of argon and oxygen are close to each other. Therefore, pressure
converter adsorption oxygen plant can only obtain oxygen with a
concentration of 90%~95% (the limit concentration of oxygen is
95.6%, and the rest is argon), which is also called oxygen
enrichment when compared with the concentration of 99.5% or more in
cryogenic air separation plant. The whole system consists of the
following components: compressed air purification module, air
storage tank, oxygen and nitrogen separation device, oxygen buffer
tank.
Technical features of PSA industrial oxygen generator:
- The compressed air is equipped with air purification and drying
treatment device, which can prolong the service life of molecular
sieve;
- The new pneumatic globe valve adopted has the advantages of fast
opening and closing speed, no leakage, long switching life,
frequent use of psa process and high reliability;
- Perfect process design, selection of new molecular sieve;
- Adopt the new oxygen production process, continuously optimize the
device design, reduce energy consumption and capital investment;
- Simple process, compact equipment structure design, saving floor
space;
- Stable equipment performance, PLC control, can achieve automatic
operation, low annual operation failure rate
- High degree of automation, fast gas production. Start, shut down
just press the button, start within 20 minutes to produce gas;
- Low energy consumption, low operating costs, raw air from nature,
only supply compressed air and power supply can produce oxygen;
- Automatic operation of the equipment, the whole process can achieve
unatten
- High efficiency molecular sieve loading, more compact, more solid,
longer service life;
- Pressure, purity, flow stable adjustable, to meet different needs
of custom;
- Reasonable structure, advanced process, safe and stable, low energy
consumption;
- Compared with the high cost of bottled oxygen and liquid oxygen
operation, oxygen making machine has the lowest cost of oxygen
making. For enterprises engaged in medical treatment, plateau,
breeding, environmental protection and combustion support for a
long time, using oxygen making machine is the most cost-effective;
Main Application:
Oxygen-enriched combustion, industrial oxygen generator can be
widely used in petrochemical industry, electric furnace
steelmaking, papermaking, glass production, making ozone,
aquaculture, sewage treatment, aerospace and other industries and
fields, for the different requirements of different users of
different industries use of oxygen, since provide personalized,
specialized oxygen equipment, fully meet the requirements of
different users of gas.
PSA industrial oxygen generator system flow
- Obtain compressed air and its pretreatment: compressed air with a
pressure of about 0.6-0.7mpa is provided by an applicable air
compressor. The compressed air is removed by the p-level filter
with large particle dust, cooled by the cooling dryer, and roughly
dehydrated. The m-level filter removes solid-liquid mixed particles
with particle size ≥1um, the h-level filter removes solid-liquid
mixed particles with particle size ≥0.01um, and the c-level filter
removes oil and water;
- Fine dewatering: twin tower drying, adsorption and analysis
alternately, depth dewatering, atmospheric dew point can be about
-40℃ dry air;
- Steady flow and steady pressure: the pure compressed air passes
through the air buffer tank to provide stable pressure and flow of
raw gas for the adsorption column;
- Nitrogen removal by adsorption: compressed air enters the
adsorption tower, one tower adsorption, the other tower desorption
(regeneration), with two towers in parallel, alternating
compression adsorption and decompression regeneration, so as to
obtain continuous oxygen flow;
- Stable flow and pressure regulation: after adsorption, the process
buffer tank is set up, which meets the process requirements and
plays the role of stable flow and pressure regulation, so as to
obtain the stable oxygen flow with purity ≥90% and pressure ≥
0.4mpa;
- Device Ⅰ, Ⅱ adsorption oxygen intake valve and outlet valve of the
tower and upper and lower valve automatically by programmable
controller according to the stipulated time, periodically to
produce gas adsorption and stripping of regeneration. A ball valve
is installed in the oxygen outlet pipeline to regulate the outlet
flow and oxygen purity of the oxygen generator, and a flow meter is
installed to detect the flow, and an oxygen sampling port is set up
to detect oxygen purity and dew point.
Technical characteristics of pure oxygen outlet
Production:200 Nm3/h
Purity:90%--93%
Pressure:0.3—0.4Mpa
Atmospheric dew point:--60℃(Under normal pressure)
Temperature: normal temperature
Product Picture:
Date of delivery:75 days after receiving deposit,
Monthly output:60 sets/month
Payment term: 30% deposit against the signed PI,70% balance should
be paid before shipment.
After Sales:Factory site installation and debugging qualified
acceptance