Industrial Sandblasting Machine Double Cylinder Pressure Type Pneumatic Recovery

Automatic Conveying Blasting Machine

Sandblasting Machine Product Introduction

1. The belt is used to transport the workpiece, and the belt speed can meet the requirements of sandblasting process to achieve variable frequency speed regulation;

2. Each gun can realize automatic swinging, and can be spot-blasted with high flexibility and wide applicability;

3. This machine adopts advanced cyclone separation system configuration, and the sand dust separation effect is good;

4. It can automatically perform automatic blasting on the required blasting workpiece with high efficiency.

5. Through-type sand blasting machine designed and manufactured by Stern can realize the structure of belt conveying, chain conveying, roller conveying, hanging conveying and so on.

6. Conveying sand blasting machine is designed and manufactured according to the national national environmental protection standards and above discharge requirements

7. The sand blasting machine adopts the polyester filter to remove dust and achieve fine filtering of fine dust to realize pulsed automatic dust removal.

Technical Sheet

Features

1. The belt is used to transport the workpiece. According to the requirements of the sandblasting process, the belt speed can realize the frequency conversion speed regulation;

2. The spray gun can realize automatic swinging, and can be sandblasted at the specified position according to customer requirements. This machine has strong flexibility and wide application range;

3. This machine adopts advanced cyclone separation system configuration to separate sand dust and high efficiency of abrasive;

4. Automatic blasting of the required blasting workpiece can be performed automatically.

5. The through-type sand blasting machine designed and manufactured by Stern can realize the structure of belt conveying, chain conveying, roller conveying and hanging conveying.

6. Conveying sand blasting machine is designed and manufactured according to environmental protection standards and above discharge requirements

7. The sand blasting machine adopts the polyester filter to remove dust and achieve fine filtration of fine dust to realize pulsed automatic dust removal.

Scope of application

It is suitable for sandblasting of flat plates, discs, profiles and other special-shaped workpieces, such as glass, stone,, aluminum alloy, stainless steel, iron plate, aluminum extruded profiles.

Description:

1. This equipment is double-cylinder pressure type sand blasting machine. It is equipped with 2 high-efficiency blasting nozzles. It adopts pneumatic recovery. The inlet width is more than 300mm, the total length of the main machine is 2400mm, the conveyor belt is composed of 5 triangle belts, and the width can be adjusted within 200mm. The baffle can be adjusted for surface cleaning of workpieces with a height of less than 160 mm.

2. The rocking bearing and the warehouse are installed in an isolated manner. The double dust ring is used, and the hanging or side mounting method can completely prevent the sand from falling on the outer surface of the bearing.

3, 7.5KW fan, 4 filter cartridge recycling, pulse meter to clean dust regularly. The bottom of the ash bucket is equipped with moving wheels, and the ash port is placed, and the upper part can be moved by the forklift.

4. Using the level gauge, timer, time delay relay, etc., the workpiece is automatically sandblasted, sanded, repeated start and stop, etc.

5. The feeding mechanism is mainly composed of motor, reducer, bearing, sprocket, etc. After the push plate is pushed to the position detection prompt, it is taken back to the lowest position for sanding. The internal width of the loading mechanism is 162mm.

6, applicable sand material specifications 16 # white corundum.

7. The total power is about 9KW.

8. The air consumption of the nozzle is 2m3

9, sandblasting machine volume 1m3

10, sand filter - the main machine 3 buckets are set to 2 layers of filtration (upper layer 2mm, lower layer 5mm) storage hopper inside the filter is 5mm orifice plate.

11. After installing the pneumatic valve on the air pipe, we will connect it to the user's original dust box. Within 3 meters, we will be responsible for debugging.

The main technical parameters

Stelle Coating Equipment Co., Ltd., an advanced high-tech entity enterprise in China, is one of the world leading manufacturers of professional coating equipment and specialized in researching, designing, manufacturing and trading of surface treatment and coating equipment. Our products are widely used in petroleum, chemical industry, engineering machinery, war industry, boating repairing, automobile, container, electric power, aviation, electrical and electronic energy, environmental protection, the papermaking, stone & glass craft sculpture, wind power, port machinery, semiconductors industry, etc.

We persist in the theory of“ quality first, integrity first, customer first” to meet our customers’ demands with good quality, professional management, comprehensive technical support, and services. It has been over 18 years since we manufactured for the domestic coating equipment market. Now we are one of the leading manufacturers both in the Chinese market and foreign market. We not only have obtained the certifications of ISO 9001 and CE, but have the strong capability of R&D. In recent years, we have carried out lots of high-tech projects to meet the demands of the client. We do believe we can do better in the future.

Mindful of the environmental responsibility faced by our generation, Stelle Coating Equipment Company is committed to researching in zero emission, dustless blasting, and treatment technologies along with the education plan promoting planet-friendly operation. By offering professional surface treatment solution, we hope we can fulfill our company's vision to make a difference in the global environmental cause we are devoted to.