Home /

Logo Custom 10g SFP+ Module , 10gb Fiber Module BIDI 1330nm/1270nm LC 40KM

Logo Custom 10g SFP+ Module , 10gb Fiber Module BIDI 1330nm/1270nm LC 40KM

Brand Name:OE
Certification:ISO9001
Model Number:SFP+ 10G 1330 BD 40KM
Minimum Order Quantity:1pcs
Delivery Time:5-8 work days
Payment Terms:T/T
Contact Now

Add to Cart

Verified Supplier
Location: Wuhan Hubei China
Address: No. 40 Gaoxinsi road, Donghu high-tech zone, Wuhan, 20 buildings 4003, Gezhouba solar city
Supplier`s last login times: within 1 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details

Logo Customized 10G BIDI SFP+ Optical Transceiver Module 1330nm/1270nm LC 40KM


Applications


High-speed storage area networks

Computer cluster cross-connect

Custom high-speed data pipes


PRODUCT FEATURES


Up to 40km on 9/125um SMF

10Gb/s serial optical interface compliant to 802.3ae 10GBASE-ER/EW

Electrical interface compliant to SFF-8431 specifications for enhanced 8.5 and 10 Gigabit small form factor pluggable module “SFP+”

1330nm DFB transmitter ,1270nm PIN-TIA

2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers

perating case temperature: 0 to 70 °C

ll-metal housing for superior EMI performance

Low power consumption, less than 1.5w

Advanced firmware allow customer system encryption information to be stored in transceiver

Cost effective SFP+ solution, enables higher port densities and greater bandwidth


PRODUCT DESCRIPTION


Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They simultaneously comply with Gigabit Ethernet as specified in IEEE STD 802.3 and 1x Fibre Channel as defined in FC-PI-2 Rev. 10.0 .


The SFP+10G modules offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.It is a mallest 10G form factor Supports 10GBASE Ethernet and OTU2/OTU2e .


The SFP+10G module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.


SFP+10G modules Complaint with IEEE 802.3ae 10GBASE-LR,Electrical interface compliant to SFF-8431 specifications for enhanced 8.5 and 10 Gigabit SFP module “SFP+”,1330nm DFB transmitter, PIN photo-detector,LC connector,2-wire interface for management specifications compliant with SFF 8472 digital diagnostic, Compliant with SFF8472 Digital Diagnostic Standard(DDM)


Specifications
ParameterSymbolMin.Typ.Max.UnitNotes
Maximum Supply VoltageVcc3-0.5-4.0V
Storage TemperatureTS-40-85°C
Operating Humidity-5-95%
Maximum Supply VoltageVcc3-0.5-4.0V
ParameterSymbolMin.Typ.Max.UnitNotes
Power Supply VoltageVcc3.133.303.47V
Power Supply CurrentIcc--300mA
Case Operating TemperatureTop0-70°C
Data Rate--10.3125-Gb/s
9/125um G652 SMFLmax--20Km

Spec


ParameterSymbolMinTypMaxUnitRef.
Transmitter
Output Opt. PowerPO-1 4dBm 
Side-Mode Suppression RatioSMSR30  dB 
RMS Spectral Width(-20dB)σ  1nm 
Optical Extinction RatioER3.5 4.5 dB 
Tx Jitter(SONET)20KHZ-80MHZTxj1  0.3UI3
Tx Jitter(SONET)4MHZ-80MHZTXj2  0.1UI3
Path penalty at 800ps/nm@9.95Gb/s   2dB 
Relative Intensity NoiseRIN  -128dB/Hz 
Center Wavelengthλc132013301340nm 
Receiver
RX Sensitivity @10.3 Gb/sSENS  -15dBm1,2
Receiver Overload -1  dBm 
Optical Center WavelengthλC1260 12701280nm 
LOS De-AssertLOSD  -17dBm 
LOS AssertLOSA-30  dBm 
LOS Hysteresis 0.5 2 6dB 

Notes:

1. Measured with conformance signals defined in FC-PI-2 Rev. 10.0 specifications.

2. Measured with PRBS 231-1 at 10-12 BER.
3. GR-253-CORE Issue 4.
4. With optical input power at the receiver between -1 ~ -11dBm



China Logo Custom 10g SFP+ Module , 10gb Fiber Module BIDI 1330nm/1270nm LC 40KM supplier

Logo Custom 10g SFP+ Module , 10gb Fiber Module BIDI 1330nm/1270nm LC 40KM

Inquiry Cart 0