Molecular Sieve type 4A is an alkali alumino silicate; it is the
sodium form of the Type A crystal structure. 4A molecular sieve has
an effective pore opening of about 4 angstroms (0.4nm). KEXING type
4A molecular sieve will adsorb most molecules with a
kineticdiameter of less than 4 angstroms and exclude those larger.
Such adsorbable molecules include simple gas molecules such as
oxygen, nitrogen, carbon dioxyde and straight chain hydrocarbons.
Branched chain hydrocarbons and aromatics are excluded.
Typical Chemical Formula
Na2O Al2O3 2.0SiO2 4.5H2O
SiO2: Al2O3 ≈2
|Size ratio up to grade||%||≥98||≥98||≥98||≥98|
|Static water adsorption||%||≥21||≥21||≥21||≥21|
|Static methanol adsorption||%||≥15||≥15||≥15||≥15|
|Water content, as shipped||%||≤1.5||≤1.5||≤1.5||≤1.5|
PACKAGE & DELIVERY
|Package||25kg/kraft paper bag||25kg/carton||150kg/steel drum|
|1 Pallet||Quantity||750kg / 1,650lbs||750kg / 1,650lbs||600kg / 1,320lbs|
|Delivery Time||5~7 days||5~7 days||5~7 days|
|20GP||Quantity||15,000kg / 33,000lbs||15,000kg / 33,000lbs||12,000kg / 26,400lbs|
|Delivery Time||10-15 days||10-15 days||10-15 days|
Drying and removing of CO2 from natural gas, LPG, air, inert and
athmospheric gases, etc.
Removal of hydrocarbons, ammonia and methanol from gas streams
(ammonia syn gas treating)
Special types are used in the air break units of buses, trucks and
Packed in small bags, it may be used simply as a packaging
Molecular sieve Type 4A can be regenerated by either heating in the
case of thermal swing processes; or by lowering the pressure in the
case of pressure swing processes.
To remove moisture from a 4A molecular sieve, a temperature of 250
-280°C is required. A properly regenerated molecular sieve can give
moisture dew points below -100°C .
The outlet concentrations on a pressure swing process will depend
on the gas present, and on the conditions of the process
4A - Zeolites are available in beads of 1 -2 mm , (10x18 mesh) 2 -3
mm , (8x12 mesh) , 2.5 -5 mm , (4x8 mesh) and as powder, and in
pellet 1.6" , 3.2" .
To avoid damp and pre-adsorption of organic before running, or must
to be reactivated.