Optical Fiber Accessories Miller Fiber Stripper For Coating Stripping And Fiber Cutting

FA-FTT04, Fiber Optic Tool Miller Fiber Stripper For Coating Stripping And Fiber Cutting

Miller fiber stripper is with wide stripping range reach maximum 10mm2 cable and the maximum stripping length is 25mm. It adopts ESG series mark number can be identified easily. It is removable handle can be installed or removed according to the size of the operator's palm and make the operation more comfortable. Partial pre-stripping or stripping function: select the block adjustment to the "stripping" position, the insulation layer still retained on the fiber cable after stripping so the optical fiber cable can be protected in filed operation, it also simplifies the operation procedure. It is with protection clippers (baffles) so it is able to prevent misoperation. The cable port will be open automatically as soon as the stripping is completed and avoid damage to tool from waste residue.

Products Features Of FA-FTT04

1, Use to strip 250 micron coating and expose 125 micron cladded fiber;

2, Second hole on the top is for stripping 2.0mm to 3.0mm outer jacket;

3, The V type port and 140 µm hole on the blades can be used to remove 250 micron buffer coating outside 125 micron fiber;

4, Pre-set before leaving factory and no need to adjust before using;

5, Will not scratch or nick glass fiber;

6, All stripping surfaces are manufactured with precise tolerances to assure clean, smooth stripping;

7, With comfort grip and ergonomic handles;

8, It can be locked when it is not in use;

9, Its working life is more than 1000 times stripping.

Operation Instruction (Fiberall)

1, Select corresponding stripping knife according to the thickness of the cable type;

2, Put the ready fiber cable in the middle of the stripping tool blade, choose a good length for stripping;

3, Hold the stripping tool handle, clamp the fiber cable, strip the jacket of the optical fiber cable with slowly force;

4, Release the handle of the tool and take out the cable. At this time, the fiber is exposed outside, and the rest of the insulating plastic is in good condition.

Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; maintenance, consulting service and accessories outsourcing.

Our main products are: All kinds of Fiber PLC Splitters, FBT Couplers, Fiber Cable Assemblies, Patch Cords, Fiber Pigtails, Fiber Adapters, Patch Panels, Fiber Optical Transceivers, OLT (Optical Line Terminal), ONU (Optical Network Unit), FTTx, Equipments & Accessories for Fiber Test, Installation, Maintenance & Repair.

With eight years’ experience in fiber optic, Fiberall established a relatively perfect products and service system, with rich industry experience, comprehensive technology and high-quality team, we are able to provide our customers with OEM & ODM service, project implementation, maintenance, and after-sale service and we have ability to meet different requirement from different customers like distributors, operators, contractors and users etc.

Adhering to the core values of “Honesty, Responsibility, Efficiency, Flexibility, Communication, Mutual Benefit”, and with trust from all old & new customers, support from all partners and effort of our whole team, Fiberall gradually formed a business model of "service to project, based on the market, integrate design, production, marketing and service together", we are committed to providing a full range, high technology, low cost, and ultra expected solution to our customers.