Add to Cart
Color | RAL and PANTONE or customized |
Gloss range | High/low/matt |
Surface | sandy,wrinkled,hammer tone,metalic effect,woodeffect and etc |
Particle size | Average 32 42um |
Curing condition | 190 (object temperature) for 15 minutes |
Coverage | 6-7 square meters per KG at 120um film thickness |
Sheif life | 10 months in closed bag bellow 25 |
Packaging | Polyethylene bag(inner) and paper carton(outer) |
Storage | Stored in closed packages with dry environ ment below 25 |
Testing items | Standards | Methods | Test index |
Iimpact strength | ISO 6272 | GB1732-1993 | 40cm |
Bending resistance | ISO 1519 | GB/T6742-1986 | 3mm |
Adhesion | ISO 2409 | GB/T9286-1998 | Grade 0 |
Cupping test | ISO 1520 | GB/T9753-1988 | 5mm |
Pencil hardness | ASTM D3363 | GB/T6739-1996 | H-2H |
Salt spray test | ISO 7253 | GB/T1771-1991 | More than500 hours |
H&humidity test | ISO 6270 | GB/T17740-1979 | More than1000 hours |
Weatherability | ASTM G151 | GB/T1865-1997 | 240(QUV B313) |
Application:
Security door, computer chassis shell, information cabinet, children's bed, iron furniture, fitness equipment, children's toys and other indoor metal products
Feature:
1 Excellent electrification, excellent leveling and gloss
2. On the high rate of powder, large spraying area, especially thin coating, low cost
3 with excellent adhesion, flexibility, impact resistance, high hardness, beautiful and elegant decoration
4. Green, non-volatile, no paint smell, no heavy metals (through SGS certification testing) in line with national standards
Description | Powder coating | |
Another Name | Powder paint,Electrostatic powder coating, Thermosetting powder coating | |
Type | Polyester&Epoxy resin series | |
Main Material | Saturated polyester resin,epoxy resin | |
Surface Type | Gloss,satin,matte,dull,wrinkle,checkered,sand grain,transparent, | |
semitransparent,metallic,and special pattern. | ||
Advantage | Good adhesion,good mechanical property,strong coating film, | |
beautiful film,customized glossiness. | ||
Application Field | Indoor use | |
Household appliance:air conditioner indoor unit,fan,radiator, | ||
kettle,lighting sets, refrigerator,TV set,kitchen ventilator, | ||
disinfection cabinet,electric cooker,etc. | ||
Daily use:Knife,fork,crafts,ornament,etc. | ||
Indoor furniture:table,chair,cupboard,safe,carved iron bed,door,etc. | ||
Application Condition | Electrostatic spray/Triboelectric gun spray. | |
Recommended curing condition:200 degree centigrade for 12 minutes | ||
(object surface temperature),range from 180 degree centigrade | ||
for 20 minutes to 210 degree centigrade for 8minutes. | ||
Recommended film thickness:50~80um, range from 40~150um | ||
Physical Property | Specific gravity | 1.4~1.8g/cm3 as per formula and color |
Particle size | average 35~40um | |
Test Condition | Substrate | 0.5mm thickness cold rolled steel sheet |
Pretreatment | Remove rust and grease | |
Film thickness | 50~80um | |
Curing temperature | 200 degree centigrade for 12 minutes | |
Mechanical Property | Pencil hardness | ISO 15184:1998,2H |
Adhesion (by griding) | GB/T 9286-1998,0grade | |
Impact test | GB/T 1732-1993,≥50 kg.cm | |
Bending test | GB/T 6742 ,≤2mm | |
Cupping test | GB/T 9753,≥7mm | |
Chemical and Durability Test | Salt spray test | GB/T 1771,≥500 hours,no obvious change , |
crossion width at cross≤2mm | ||
Heat and moisture test | GB/T 1740,≥1000 hours,no change | |
Package | Inside by two-ply PVC bag,outside by carton,net weight 20kg | |
Storage Condition | Store in dry ventilated room,temperature under 35 degree centigrade, | |
avoid direct sunlight. | ||
Shelf Life | Six months | |
Health and Safty | Raw material of powder coating don't contain toxic substance, | |
no toxic gas produced during curing.Please wear dust mask in operation | ||
to avoid inhelation of powder.Please avoide prolonged skin contact | ||
with powder,wash out powder with soap and water. |