MITECH MHBS-62.5 Digital Display Small Load Brinell Hardness Tester

Overview

Mitech MHB-62.5 Digital Display Small Load Brinell Hardness Tester, based on the mechanical principle of hard alloy indenter pressing into the sample surface to produce indentation, realizing the material hardness measurement by measuring the diameter of the indentation. It’s MITECH latest optical mechanical and electrical integration of high-tech products. It is novel and high reliable with accurately measurement. With LED display, simple operation, it can visually display the test results to meet the hardness testing requirement for the quality control and qualified assessment of the workpiece sample. It is widely used in metal processing and manufacturing, various metal material’s failure analysis and other fields like colleges and research institutions.It is the new type Brinell hardness testing instrument for testing the hardness of the materials like cast iron, steel, soft alloy with small and thin sheet type workpiece and so on.

Technical Parameters

Working Principle

Hardness is not a simple physical quantity, but a reflection of the material elasticity, plasticity, strength and toughness .and hardness test is the most simple mechanical testing method to determine the metal material performance. Also one of the important means to judge the products quality.

Brinell hardness test: Test force(F) is on the steel ball with certain diameter(D) , pressed on sample surface. After a period of time, cancel the force. The indentation diameter is get by measuring with micrometer ocular,thus to calculate the average pressure(N/mm²).Then we can get the Brinell hardness of the sample as below:

Tips:F—Test force on steel ball,unit:N

D—Diameter of steel ball ,unit:mm

d—Indentation diameter,unit:mm

0.102—Rule coefficient

Features

• Suitable for measuring the small or thin workpiece hardness , a variety of small load Brinell scale selection;
• Support Brinell, Rockwell, Vickers and other hardness standard conversion
• Built-in large-capacity chip, can store large amounts of data, comes with the database for comparison;
• Modeling novel, strong structure, high reliability, simple operation, intuitive readings, high test efficiency;
• With RS-232 interface, can communicate with the computer;
• Equipped with excellent performance of the carbide indenter, high hardness, wear resistance, good toughness, while high temperature, corrosion resistance, to ensure that the instrument test value is accurate, stable and reliable;
• Host stability is good, the workpiece surface quality and man-made factors on the hardness of the test results less impact;
• LCD display, menu smart tips, easy to operate;
• Optional shooting device, can achieve the measured indentation and material metallographic organization to shoot;
• Compliance with ISO 6506, ASTM E10-12, ASTM E-384, GB / T231.2, JIS Z2243 and other relevant domestic and foreign standards.

Application field

• Metal processing industry quality control links
• Universities teaching and demonstration test
• The failure test of metal material
• The material hardness test of scientific research institutions

Working conditions

• Working Temperature:18℃～28℃；
• Relative Humidity:≤65％；
• Clean environment, no vibration；
• No corrosive media around.

Configuration

Maintenance and care

• Before using this instrument, please read the instruction manual carefully, learn more about the steps and precautions.
• In general, the first measurement point is only used to offset the gap between the support surface, without recording the test results, from the second point of statistical test results;
• Machine add unloading test power, it is forbidden to turn the variable load the handwheel, such as rotating dislocation can lead to internal gear, chaos test force, and even cause damage to items within the machine;
• User’s should follow the operating procedures, before and after the test should be repeated with standard block proofing instrument. If a long time idle, re-boot after several proofreading, to be stable after the test results, and then test part;
• After applying the main test force in the hardness test, it is forbidden to turn the variable hand wheel.
• The instrument should be carried at the bottom of the handling, to prohibit cross. Before loading, please unplug the power plug, fixed measuring lever and remove the weight and boom;
• When not in use for a long time, please cover the dust cover to prevent dust into the instrument interior. And the hardness block, indenter should be coated with antirust oil to prevent rusting after using.
• Start using again after long time idling, please make testing after preheating the electrical components.
• The accuracy of the reading microscope has been adjusted before leaving factory. It is prohibited to disassembly without authorization. Otherwise, it will reduce the reading accuracy of the micro eyepiece.
• The storage and using of the reading microscope should avoid dust, damp and corrosive gas environment;
• If there is dirt on the surface of the reading microscope lens, please wipe it with soft absorbent cotton or lens paper. If there is oil pollution, please wipe it slightly by the absorbent cotton with industrial alcohol or ether.
• Should be regularly in the screw and hand wheel contact surface into a small amount of oil;
• Conducted at least once a year instrument verification, to ensure the accuracy of the hardness tester
• Don’t disassemble the instrument without authorization, maintenance related matter, please contact MITECH after-sale service department with 4000600280.

Mitech CO.,LTD. located in Beijing, China and was founded in 2004 by a group of doctors and masters graduated from tsinghua or Peking University. It is a professional NDT testing manufacturer, we have our own R&D office for newest and highest technology.

Over ten years, Mitech has always adhered to the business philosophy,

"Technology innovation for development, high quality service as the forward boat", relying on the mastered technology and the tireless pursuit for science and technology, Mitech continuously blends in leading-edge technology to NDT instrument R&D and application, makes the product performance and technical indicators reaching to the international leading level.

From NDT portable instrument to large automatic detection system. Mitech owns intellectual property rights of core technology and it has already applied for invention patents and software copyrights and passed international certification such as EU CE certification and Russian GOST certification etc. Mitech products has been widely used in quality control and safety monitoring of aerospace, petrochemical pipeline, military industry, nuclear industry, ship, automobile, metallurgy, steel structure manufacture, boiler pressure vessel and so on, do the best working for safe operation of industrial production.

Mitech users have spread all over the world such as Japan, Korea, India, Germany, USA etc. By the best quality with competitive price, Mitech had gained a good reputation from global customers. As the professional NDT manufacturer, Mitech will insist our rule of serving for world NDT industry for best and quick development. We are looking for NDT agents from all over the world and welcome knowledgeable people to join us for development.

As professional NDT manufacturer, Mitech will supply you best quality products with competitive price. Professional business team can provide more promotion support according to local market together with our comprehensive experience to help you do professional needs analysis and market protection, launch new products continuously to create more opportunities for long cooperation. Meanwhile, we will support you strong after-sale service to solve more trouble. Any product quality problem within 3 months, we will replace a new one for free, all products with warranty up to two years and life-long maintenance. We will provide maintenance training and accessories with cost price. Mitech has sound market management system to help you manage market precisely and share customer information, establish and standardize market system for long-time win-win cooperation.

Mitech devotes to creating the value for world NDT industry as own duty, unswerving to provide perfect products to the market, providing customers with conscientious service, sincere management to create famous brand.

Mitech is willing to cooperate with world NDT colleagues and makes the efforts for more brilliant tomorrow, struggling for more secure NDT world.