Product Details
OEM 2 Channels digital video multiplexer video to fiber converter
with RS485 Reverse Data
Features
- Card type or independent structure, which is applied tocentralized
management 2.5U chassis
- 8/10-bit digital code and non-compression type videotransmission
- Support any high-resolution video signal
- 5Hz-10MHz video channel
- Automatic compatible PAL, NTSC and SECAM video system
- With APC circuit, constant input optical power, and largedynamic
range
- Kilomega optical fiber transmission, large capacity, andeasy to
upgrade
- Power supply and other parameter state indication, whichcan monitor
the operation condition of system
- Support no-damage regenerative trunk of video
- Advanced self-adapting technology, and it is unnecessary
toimplement the adjustment of spot electrics or optics when using
- Industry-grade design and modularization design make theequipment
reliable and flexible
Technical Specification
Fiber Features:( the fiber optic connectors usually is FC, can order ST)
Type | wavelength (nm) | TX power dBm | Transmission Distance Km | Lose dBm/Km | Fiber Type |
Multi-mode | 850,1310 | -19.5~-16 | 0~2 | 1 | 850/1310nm(Multi-mode) |
Single-mode | 1310 | -9~-6 | 0~20 | 0.5 | Single-mode(9/125um) |
1310 | -7~-4 | 0~40 | 0.5 | Single-mode (9/125um) |
1310 | -5~-1 | 0~60 | 0.25 | Single-mode (9/125um) |
1550DFB | -2~0 | 0~100 | 0.25 | Single-mode (9/125um) |
Optics:
Wavelength | WDM:1310nm/1550nm |
Output Power | -8~3dBm |
Optic fiber | 50/125u multimode,62.5/125u multimode,9/125u single mode |
Rx sensitivity | -26dBm |
Optical connector | FC,ST,SC (optional) |
Distance | 0~550M (MM) / 0~80KM (SM) (Default distance is 20Km) |
Video:
Number of Channels | 2 |
Input/output impedance | 75 Ohm (unbalance) |
Standard video input/output voltage | 1.0Vp-p |
Video Bandwidth | 50MHz |
Sampling Bandwidth | 8bit |
Sampling Frequency | 108MHz |
Signal to noise ratio | >67dB |
Rise and Fall time | <0.8ns |
Optical Signal Intrinsic Jitter | <0.2 UI |
Differential Gain | < ±1.5% |
Differential Phase | < ±1° |
Connector | BNC |
Supporting video pixel | 1280(H)x720(V)@30Hz/1MPX 1280(H)x720(V)@50Hz/1MPX 1280(H)x960(V)@30Hz/1.3MPX 1920(H)x1080(V)@30Hz/2MPX |
Data:
Protocol | Default :RS485 (RS232/RS422 Optional) |
Number of channels | 2 |
Connector | 9pins Terminal Blocks |
Data Rate | 0-200Kbps |
Directions | Default :Simplex from Rx to Tx (BIDI duplex optional) |
Mechanical Structure & Environment
Power | DC5V 2A |
Power Consumption | ≤6W |
Working Temperature | -15ºC ~65ºC |
Storage Temperature | -40ºC ~85ºC |
Relative Humidity | 5%~95% ( no condensation) |
MTBF | ≥ 100000Hours |
Application
- Intelligent Transportation System
- Connection of Sub-network for Surveillance Center
- Public Security Surveillance
- High Way & Toll Station Surveillance
- High Quality Video Conference
- Industrial Closed Circuit Television Surveillance
- Coliseum using for TV-live ,audio transmission
Ordering information
Model Number | Product Configuration | Fiber Interface | Fiber Mode | Wavelengths | Maximum Transmission Distance |
HD-M2V-T/RF | 2 Ch Video | FC/SC/ST | Multi-mode | 1310/1550 nm | 2Km |
HD-S2V-T/RF | 2 Ch Video | FC/SC/ST | Single-mode | 1310/1550 nm | 20Km |
HD-M2V↑1D↓3-T/RF | 2 Ch Video 1 Ch Data | FC/SC/ST | Multi-mode | 1310/1550 nm | 2Km |
HD-S2V↑1D↓3-T/RF | 2 Ch Video 1 Ch Data | FC/SC/ST | Single-mode | 1310/1550 nm | 20Km |
Company profile
- 2009 HANDAR OPTICS Established in Nov 2009 , with professional
R&D and sales team who had been working in fiber optical
telecommunication field since 2004 .
- 2010 HANDAR OPTICS started to produce full range of
multi-functional video/audio/data/Ethernet/Telephone/Alarm to fiber
converters and became to one of the leading manufacturers in this
field
- 2011 HANDAP OTPCIS founded our engineers team to develop the SFP
transceivers , and start to produce 155M and 1.25G SFP transceivers
at Aug 2011
- 2012 HANDAR OPTICS started the project for 10G SFP+
- 2013 HANDAR OPTICS founded our engineers team to develop the
Industrial level Ethernet Switch and POE switch . and stated to
produce at the end of 2013 .
- 2014 HANDAR OPTICS started the project for 40G QSFP/CFP/CFP2
- 2015 HANDAR OPTICS improved our products for analog
video/audio/data multiplexer to High-Definition series , include
Analog high-definition TVI/CVI/AHD and Digital high-definition
SDI/HDMI . We became to the leading manufacturer of such products
in Shenzhen China .
- 2016 HANDAR OPTICS moved to new office with better workshop which
allow us to offer better products and services to our partners .
- 2017 HANDAR OPTICS will keep focusing on fiber optical
telecommunications field and offer to all our partners higher
quality and better services .
Shipping
Company Profile
Shenzhen Handar Optical Technology Co.,LTD,Located in
shenzhen,china,was founded in 2009,which is professionally engaging
in researching & developing,manufacturing,and marketing fiber
optical communication product.
With several-year development,Handar has established a profession
teechinical team,strict quality control system and hight -tech
production line.
Currenty Handar featured product including SFP transceiver
155M/1.25G/10G/40G/100G,media converter,AHD/TVI/CVI video to fiber
converter and industrial ethernet switch. They are widely adopted
in IP LAN,WAN, Telecommunicaton and hight definition CCTV
systems.Users include China Telecom,China Unicom,China Mobile,China
Broadcast&Television,also we are exported to more than 30
countries and areas,such as USA,Germany,Spain,Russia,Denmark,Korea
,Malaysia,Singapore and etc.
Handar is aimed at establish long term relationship with global
partners,we providing better quality,effective price,excellent
after-sales-sevices.We are ISO 9001 certificated company,our products got CE
certificate and were approred by RoHS standard.