Add to Cart
2.45 GHZ Active reader with long distance more than 80 meters
1:Product overview
F2411 reader is a work in the 2.45GHz frequency active RFID read and write equipment, with omni-directional and directional antenna can achieve omnidirectional directional read and write functions.The product uses an external antenna installation, flexible configuration of all kinds of omnidirectional and directional antenna, with a wide range, high recognition rate, powerful, high reliability, scalability and other characteristics, the reading distance of 0 - 80 The radius of the meter is adjustable.
2:Product advantage
1): Readers support Wiegand 26/34, RS232, RS485 and 100 Gigabit Ethernet interface and other communication interface.
2): Readers support active reading, command triggering, timing triggering to meet the different needs of users.
3): Using muti-read and write device technology to support muti-reader intensive environment work mode.
Readers and antennas using external installation, flexible configuration of all kinds of omnidirectional and directional antenna to meet the needs of various application scenarios.
4): Read the distance can be software debugging, to achieve perimeter applications.
5): It provides a powerful API user interface that enables rapid integration and docking with existing user information systems.
6): The design of the reader, device selection and production testing process are referenced to industrial product labels, to meet the use of various harsh conditions.
7): The product uses alloy cavity shell, with high strength, anti-interference and so on.
3.Product technical parameters
RF parameters | |
working frequency | 2.4-2.483G |
Output Power | +20dbm |
Receiving sensitivity | -95 dbm |
Communication speed | 1Mbit/s |
Recognition angle | Omnidirectional / directional (depending on whether the array is directional or omnidirectional) |
Polarization mode | Vertical polarization |
Communication interface | |
communication interface | RS232,RS485,Wiegand 26 / 34,10 / 100M adaptive Ethernet interface |
I/O interface | 2 input interface, 4 output interface |
Extensible wireless module | 802.11 module, the whole network through the 4G module |
Firmware upgrade | Support serial upgrade |
Serial communication parameters | Baud rate adjustable (default 115200bps) |
Application software platform | Provide software development kit (SDK) and API |
Tag operation | |
Tag operation support | Private protocol |
Support tag work mode | Actvie tag |
Read tag distance | 80m(depending on the output power of the tag) |
Recognition speed | 200 tags / sec (ID only) |
Mechanical and electrical performance | |
Size | 208mm×125mm×35mm(L×W×H) |
Weight | 0.75kg |
Power consumption | 12W |
Power | DC12V |
Operating temperature | -40℃-70℃ |
Storage temperature | -50℃-80℃ |
Working humidity | 5%-95 (No condensation) |
IP lever | IP54 |
4: Interface description
PIN | Name | Description |
1 | 5V | 5V power supply output |
2 | 485-A | RS485 A data interface |
3 | 485-B | RS485 A data interface |
4 | GPIO_IN1 | IO input control interface |
5 | GPIO_IN2 | IO input control interface |
6 | NC | - |
7 | NC | - |
8 | GND | Ground |
9 | GPIO_OUT1 | configured Wiegand DATA0 output |
10 | GPIO_OUT2 | Configured Wiegand DATA1 output |
11 | GPIO_OUT3 | GPIO output output, through the program to control the high and low level output.Output high level is 5V, low level is 0V. The maximum output current is 100mA. (The default output level is low 0V) |
12 | GPIO_OUT4 | GPIO port output, through the program to control the high and low level output. Output high level is 5V, low level is 0V. The maximum output current is 100mA. (The default output level is low 0V) |
13 | NC | - |
14 | NC | - |
15 | 12V | 12V power output |