Stainless Steel Tray And Cover Heater And Timer Digital Ultrasonic Cleaner

Stainless Steel Tray And Cover Heater And Timer Digital Ultrasonic Cleaner

Benefits of cleaning jewelry with an ultrasonic cleaner

• The process reaches parts of the jewelry that are extremely difficult to clean with traditional cleaning methods.
• Jewelry gets completely clean, leaving it looking brand new.
• No need to disassemble the jewelry.
• Multiple pieces can be cleaned at once, saving time and money. Follow manufacturer recommendations for maximum pieces in your ultrasonic cleaner.
• Gentle cleaning does not damage delicate pieces and allows for cleaning as often as necessary.

Steps to cleaning jewelry with an ultrasonic cleaner

1. Fill chamber with cleaning solvent
2. Note that water must be hot. Ideally, you would use an ultrasonic cleaner with a heater.
3. Run a pre-cleaning cycle
4. Submerge jewelry into cleaning solvent
5. Run the cleaning cycle
6. After the cycle is complete, remove the items from the parts basket and rinse the solution from the items
7. After rinsing brush the pieces with a soft-bristled brush. Paying special attention to brushing around the claws and crowns that hold the gemstones or diamonds in place.
8. Complete with a final rinse. Place the jewelry in water only and dry with a soft cloth once rinse cycle is complete.

Application:

1) Jewelry: Earrings,Necklace,Rings,Bracelets and Diamonds.
2) Glasses&Timepieces: Glasses,Optical Lenses,Contact Lens Accessories,Watch Chains and Waterproof Watches.
3) Commodities: Tattoo Guns and Tubes,Electric Shaver Heads,Razor Blades,Dentures,Combs and Toothbrushes.
4) Stationery: Pen-heads,Printer heads,Inkjet Cartridges and Seals.
5) Metal Articles: Ancient Coins, Badges,Valves,Machine Nozzles,Electronics Components and Mechanical Parts,Forks,Knives,Spoons and Other Small Silverware etc.

6) Laboratory: Scientific Research, Mixing, Cell Disruption, extraction, pharmaceutical Sonochemistry

7) Others: Baby nipples,baby feeder bottles,beauty brush.

Specifications:

Cleaner Cleaning Equipment 2L 50W 40KHZ Jewelry Glass Digital Ultrasonic Bath

Ultrasonic Cleaners

An ultrasonic cleaner is the ideal method for cleaning and restoring delicate items, which makes jewelry a perfect candidate for this methodology. Day-to-day dirt and grime, oily residues and even jewelers rouge (a compound for cleaning and buffing jewelry) can be removed from the tiny crevices and hidden passageways of these items. This cleaning method is ideal because the equipment can be adjusted to the proper ratio and frequency required to clean but not damage items. This is one of the top benefits of ultrasonic cleaning.

How an ultrasonic cleaner works to clean jewelry

special solvents designed for cleaning jewelry can be utilized however very good results can also be obtained by using water and an environment friendly low pH cleaning agent. Low pH or excessively high pH chemicals should be avoided. These aggressive chemistries in combination with heat and the ultrasonic activity can potentially cause damage to delicate pieces.

In the cleaning process, items are submerged in the cleaning solvent. The intensity of the cleaner as well as the heat of the solution should be adjusted to successfully engage the application. Ultrasonic cleaners work quickly to completely remove dirt and other contamination through a cavitation process.

Jewelry is cleaned in the same way as other items. Items are submerged into a gentle solvent and the cleaning process sends ultrasonic waves through the solution which creates bubbles that clear away all dirt and grime clinging to the jewelry’s surface. In most cases a short two to three minute cleaning is all that is required for optimum results.

We also design and manufacture custom systems for unique applications and can provide components to convert or upgrade an existing tank. Whether you need a system to clean bearings or ceramics, ophthalmic precision lenses or mechanical manufacturing assemblies, we have a system that provides you with results.

laboratory ultrasonic cleaner, including High Frequency Desk-top Lab Ultrasonic Cleaner, Low Frequency Desk-top Lab Ultrasonic Cleaner with Heater and Low Frequency Desk-top Lab Ultrasonic Cleaner.

Application:

Features:

1. Ultrasonic power: 0-100% adjustable

2. Time setting: 0-30min or 24 hours continuous working

3. Heating: 20-80℃ adjustable

4: Ultrasonic frequency: 28 kHz or 40 kHz

5: Material: 2mm thickness SUS304 tank for acid-proof.

6: Improved PCB design for stable and durable industrial use

7: More strong and uniform ultrasonic wave

8: With free lid and stainless steel SUS304 basket

Product specifications:

AG SONIC technology limited is a collection of ultrasound technology research, ultrasonic product development, production, sales and technical services in a body's national high-tech enterprises. We have our own R&D department with the factory in Songgang, Shenzhen. Our engineers are engaged in the filed for more than 8 years, so we have our own improved PCB design for stable and durable industrial use. Not only standard ultrasonic cleaner, but also any non-standard can be designed by engineer.

Product offered:

●Household ultrasonic cleaner

●Tabletop ultrasonic cleaner (mechanical series, digital series, power adjustable series)

●Industrial standard ultrasonic cleaning machine

●Customized ultrasonic cleaning machine

Service offered:

ODM/OEM

If you have good idea of ultrasonic applications, we can help you to make it come true.

Our Market:

We sell ultrasonic machines to worldwide countries, and our professional team will offer you the best after-sales service. We believe after-service is as important as quality and price.

Our faith:

Only action can make the goal come true!