Stainless Steel BBT Beer Fermentation Tanks 1000L Horizontal / Vertical Type

Vertical Brite Beer Tanks

1. 100l - 5000bbl capacity available
2. Top quality stainless steel. Other finishes available upon request
3. Standard features/specs:
4. Pressure valve, relief valve
5. Site Glass level
6. Carbonation stone assembly
7. Sample valve
8. Side manway
9. Beer outlet
10. CIP connections
11. Temperature and pressure gauges
12. Jacketed and single wall tanks

Detaied specification

Horizontal bright beer tank

The tank for beer pouring - the horizontal, cylindrical capacity intended for beer pouring. The tank can be equipped with rubashechny cooling or is placed in the cooled room. The plastic bag in which beer is stored is put in the tank. Pouring of beer is carried out by means of the air pressure upon bag. Tanks in standard execution - the volume of 500 and 1000 liters are made.

Advantages of the tank:

• beer does not contact with air,
• pouring of nepasterizirovanny beer, i.e. 100% of natural product is possible,
• labor-consuming manipulation with KEG barrels disappears.

One of opportunities of delivery of tanks for pouring of beer is their vertical registration with copper covering, such tanks together with copper decorative domes stamping manually are graceful addition of interior of bars and restaurants.

TECHNICAL CHARACTERISTICS

Bright beer tank

The whole set brew equipment is made of austenitic stainless steel.The cooling jacket adopts dimple jacket. The jackets are provided at tank body and conical bottom to effectively increase the cooling speed. Heat exchanging area of jacket of different proportions can be allocated according to customers' technological requirements. Widly used in brewery,bar, hotel,family etc.

Specifications:

Details

Working Capacity: 500l

Diameter: 910mm

Overall Height: 2200mm

Net weight: 270kg

Manhole: Top manhole

Material: 304 Stainless steel

Description:

304 stainless steel unless otherwise noted

The tank is designed for 15 psig

Flange and top top and bottom

Two pits, a cooling jacket (one at the bottom, one on the side wall) c / w side of the installed glycol port

The cooling jacket is designed for 35 psig.

Sampling cock

Carbonized mouth

Side placed in / raised sidewalk

Pressure / vacuum safety valve

Pressure gauge assembly

CIP arm fixed 316SS spray ball

With a calibrated strip

Polished stainless steel pins with adjustable feet

The side walls and the bottom are insulated and coated with # 4 finishing stainless steel

Dimension

Fermenter Configuration

Design pressure 45 psi (3bar); working pressure 15psi (1bar)

4 stainless steel legs with leveling footpads

Interior shell: 304 stainless steel, thickness 3mm

Exterior shell: 304 stainless steel, thickness 2mm

Interior and exterior finish bright polish to 0.6~0.8, hygiene surface

60 degree cone bottom, other angles can be specified during the design process

Combined drain extensions and beer port in cone are standard

25% headspace, unless a different volume is requested

Top manway or side manway door

Dual zone in sidewall and cone dimple cooling jacket with glycol inlet and outlet

Polyurethane insulation thickness 80mm for cooling jacket on side and bottom

Fully welded exterior shell

Non welding CIP arm and rotating 360 degree reach spray ball

Solenoid relief valve, pressure relief valve (safe valve) are standard

Pressure gauge

Temperature sensor well

Sanitary sample valve and port

All clamps and gaskets to attach all accessories

Tank complete with piping, fittings, sanitary valves and all parts.

Carbonation port is available for special request (stone not included)

Ladder hooks is available for special request

Dry hop ports and/or hop bag hooks in any fermenter of any size for special request