7cm Wing 12*25mm Hole Galvanized Plaster Angle Bead 2.7m Length Silver Color

7cm angle Bead is made of hot galvanized sheet,The wing is 7cm .And we can produce the length Less than 3m .The wings sank into the plaster.It is used to provide strong corner reinforcement for conventional plaster applications. A solid metal nose of angle bead provides a straight, rigid ground for screeding and the angle bead flanges can be flexed easily over irregular, uneven surfaces. Plaster keys near the solid nose provide increased reinforcement where needed and ensures straight corners

Specification:

Wing Width :70mm

Thickness: 0.3mm,0.35mm,0.4mm

Length: 2-3m

Applications:

Using this sheet is very quick and simple by applying plaster dabs to the wall at both sides of the corner at approximately 600mm intervals. The bead is then placed against the corner and the mesh wings are then firmly placed in to the dabs of plaster resulting in the bead being set firmly and projecting sufficiently to the required thickness of the plaster on both sides of the corner. The corner of the bricks is fixed by using galvanized nails or wire tying.