Add to Cart
White Color LED Strip Car Trunk Cargo Area Illumination With Automatic On / Off Function
Charactors of Sunway SW-3199 LED Strip Car Trunk Cargo Area Illumination:
1. 10pcs powerful SMD2835 LEDs per strip, perfect for lighting up the entire trunk.
2. AA*3 square battery box + built-in control circuit + exterior LED strip, 3M velcro at the bottom of square box for easy installation.
3. Horizontal sensor: turn up or down in a horizontal direction, when the turning angle exceeds 40 degree, the light turns on automatically, the reaction time is 2-3 seconds.
4. Vertical sensor: turn left or right in a vertical direction, when the turning angle exceeds 40 degree, the light turns on automatically, reaction time is 2-3 seconds.
5. Switch: turn the switch to OFF position if not use in a long time, turn the button to ON position when use.
6. 3pcs AA batteries, voltage 4.5V, standby life reaches up to more than 2 months, more than 16 hours continuous lighting services.
7. Double-sided tape included for easy installation, just peel and stick onto any flat surface.
8. CE, ROHS approved.
Applications of Sunway LED Strip Car Trunk Cargo Area Illumination:
The LED Strip Car Trunk Cargo Area Illumination is fantastic for car trunk cargo area, luggage box lighting and other interior illumination, you can find everything you need without a flashlight.
Specifications of Sunway LED Strip Car Trunk Cargo Area Illumination:
Parameter | Specification |
Model No. | SW-3199 |
Power | 0.8W |
Input current | Max. 200mA |
Input Voltage | DC 4.5V |
LED | SMD2835 |
LED quantity | 10PCS |
CRI | Ra>70 |
Static current | <16UA |
Luminous flux | 60Lm±10% |
Life time | >30000h |
Beam angle: | 120° |
Working Temp | -20~+45℃ |
Storage Temp | -30~+70℃ |
Color Temp | 5000-6000K |
Working time | 12-20 hours |
Cases material | ABS plastic |
Dimensions | 64*72*23mm |
Length of LED strip | 1.0M |
Weight | 160g-200g |
Package | Blister card package |
Dimmer | On/Off switch |
Safety certification | CE, Rohs |
Package for Sunway LED Strip Car Trunk Cargo Area Illumination:
1. Packing size (Blister L*W*H): 288*147*33MM
(mark: 1pc/blister)
2. Inner size (L*W*H): 285*145*145MM
(mark: 16pcs blister/inner box)
3. Carton size (L*W*H): 630*610*340MM
(mark: 3 inner boxes/carton, total 48pcs)
4. Gross weight: 16.5Kg
Caution:
1. Do not look directly at LEDs.
2. Don’t mix standard (carbon or zinc) or rechargeable batteries!
3. Read the manual before installation.
4. For indoor use only.
5. Don’t mix old and new batteries
6. Recycle old batteries whenever possible.
Control Box Installation:
a) As shown in the picture below, open the door and place the control box with its front side to the horizontal direction of the door axis, make sure the axis is horizontal direction, find the best position in the door to install considering easier operation in future.
b) Find the best position to install the Lights to make sure the best lighting condition of the strip, and the position should be interfered with by other objects.
c) Clean the installation place carefully to make sure dust free, 3M might peel off if the place is not clean.
d) Velcro installation: remove the backing paper and paste the velcro to the proper place, fix the control box well to the velcro.
e) LED Lights installation: remove the backing paper, paste the Lights under proper force to make sure it is pasted well.
f) Connect the DC connector to the control box and sort out the cable properly to make sure the space is tidy and beautiful.
g) Make sure batteries available and right anode and cathode in the control box before use.
h) Turn the switch to ON position after installation, the light turns on and off automatically when open and close the door, the reaction time is 2-3 seconds.
i) Battery replacement: disconnect the DC cable, remove the square control box, open the battery cover, put batteries in with correct anode and cathode, then chuck the cover.