China Categories
English
Home /Temperature Instruments /

4mm Banana Connector 1000A/5A Split Core Current Transformer With 110mm & 50m Diameter

4mm Banana Connector 1000A/5A Split Core Current Transformer With 110mm & 50m Diameter

Brand Name:GFUVE
Certification:CE, UL, ISO9001, KEMA
Model Number:P50, Q110, Q125, Q8A, Q20, XQ13, XQ20
Minimum Order Quantity:3pcs
Delivery Time:3-7days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now

Add to Cart

Verified Supplier
Location: Beijing Beijing China
Address: Oriental HuaRui A, No. 150 Guanzhuang Road, Chaoyang District, Beijing, 100024, China
Supplier`s last login times: within 37 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details

Q110 4mm Banana connector 1000A/5A Split Core AC Clamp on Current Transformer with 110mm & 50m diameter


Theory


In electrical and electronic engineering, a clamp on current transformer is an electrical device with jaws which open to allow clamping around an electrical conductor. This allows measurement of the current in a conductor without the need to make physical contact with it, or to disconnect it for insertion through the probe. Clamp on current transformer are typically used to read the magnitude of alternating current (AC) and, with additional instrumentation, the phase and waveform can also be measured. Some clamps meters can measure currents of 1000 A and more.


Applications


The round jaw design on the Q110 AC clamp on current transformer along with the high content nickel metal core makes them well suited for power quality applications where high accuracy and low phase shift along with wide frequency are important. Measurement range is 1mA to 3000A.

This industrial-style clamp on current transformer has a BNC connector and can be used with a shrouded banana plug adapter so it can be used on digital multimeters, TekMeter, and oscilloscopes. The P50 can measure AC currents from 1 mA to 3000 A peak over a frequency range of 5 Hz to 30 MHz. It provides a 1 mV, 10 mV, or 100 mV output for each Amp measured.
The Q110 clamp on current transformer is a general purpose 1000A AC current clamp designed for use with DMMs, loggers and other instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp or 1mV per amp measured in the jaw. The Q110 has an integral 2.5m lead terminated. The rounded jaw design on this current probe makes it well-suited for power applications where high accuracy 0.1% and low phase shift and wide frequency response are important.

DMMs and oscilloscopes

Power quality measuring

Large industrial loads

Measuring around cable bundles

Power load monitoring

Waveform analysis

Energy meter calibrator

Power monitor

Phase Angle meter

Resistance tester



Features


Measurement range of 1mA to 1200A or 3000A AC

Large jaw opening accommodates conductors up to two 500kcmil

Improved ergonomic design and easy operation

High content nickel metal core

Conforms to EN 61010, 600V CAT III

Low phase shift for power measurement

High bandwidth 30MHz

Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters

UL, CE mark

PARAMETERS


Electrical parameters
Ratio1000: 1 or 2000:1 (customized)
Accuracy class0.1%, 0.2%, 0.5%
Primary current0 - 1000A AC
Secondary current1mV/A AC, 5mV/A or (customized)
Max. Cont. Input current1200A
Over voltage categoryCAT III 600V
Output signal (AC current)333mV, 500mV,1V,2V,5V AC at nominal input current
AC Accuracy(1000A Range)
0-10A≤0.5%
10-100≤0.2%
10-1200A≤0.1%
AC Phase Shift(1000A Range)
0-10A≤0.5°
10-100≤0.2°
10-1200A≤0.1°
Frequency range40Hz-2000Hz
Dielectric strength3KV 50Hz/60Hz at 1 minute
Temperature range-20°C to +55°C
Output2.5 meter cable with D01 connector
Max. voltage not insulated conductors600 V
StandardEN 61010-1, EN 61010-2-032, IEC60044-1
InstallationClamp type
Output modeLead output (2.5m)
Mechanical parameters
Dimensions (L x W x H)(mm)102.9 x 219.6 x 28
Weight (g)550
Holding wire diameter (mm)φ50
Max. jaw opening (mm)50
ColorGray or blue
MaterialPC+ABS+Polycarbonate, UL94 V0

China 4mm Banana Connector 1000A/5A Split Core Current Transformer With 110mm & 50m Diameter supplier

4mm Banana Connector 1000A/5A Split Core Current Transformer With 110mm & 50m Diameter

Inquiry Cart 0