NEW Original ABB Module 3BSC690073R1 S800 I/O Digital Input Module DI890 PR:D
Brand Name:ABB
Certification:CE
Model Number:DI890
Minimum Order Quantity:1
Delivery Time:In Stock
Payment Terms:T/T / Paypal
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
23E BlockB,Lushan Building，Chunfeng Road,Luohu District,Shenzhen,518001,China
Supplier`s last login times:
within 25 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
NEW Original ABB Module 3BSC690073R1 S800 I/O Digital Input Module
DI890 PR:D
Description of DI890:
The DI890 Digital Input Module has 8 channels. The module includes
Intrinsic Safety protection components on each channel for
connection to process equipment in hazardous areas without the need
for additional external devices. Each channel is galvanically
isolated from the power supply, ground, and each other.
Intrinsically safe Proximity sensors or volt-free contacts can be
powered and monitored by any channel.
The Proximity sensor should conform to the NAMUR standard and line
faults can be detected without any additional external components.
For line faults to be detected when using volt-free contacts,
external resistors should be connected in series and in parallel to
enable the state of the field circuit to be sensed by the input
channel. All eight channels are galvanic isolated from the
ModuleBus and power supply individually. Power to the input stages
is converted from the 24 V on the power supply connections. Three
LEDs indicate module status Fault (Red), Run (Green) and Warning
(Yellow).
TU890 and TU891 Compact MTU can be used with this module and it
enables two wire connection to the process devices without
additional terminals. TU890 for Ex applications and TU891 for non
Ex applications.
General Information
| Type | Digital Input |
| Signal specification | NAMUR input level |
| Article number | 3BSC690073R1 |
| Number of channels | 8 |
| Signal type | Proximity sensor (NAMUR) or Voltage free contact |
| HART | No |
| SOE | No |
| Redundancy | No |
| High integrity | No |
| Intrinsic safety | Yes |
| Mechanics | S800 |
I/O Modules
| AI801 | AI810 | AI815 | AI820 | AI825 |
| AI830A | AI835A | AI843 | AI845 | AI880A |
| AI890 | AI893 | AI895 | AO801 | AO810V2 |
| AO815 | AO820 | AO845A | AO890 | AO895 |
| DI801 | DI802 | DI803 | DI810 | DI811 |
| DI814 | DI818 | DI820 | DI821 | DI825 |
| DI828 | DI830 | DI831 | DI840 | DI880 |
| DI890 | DO801 | DO802 | DO810 | DO814 |
| DO815 | DO818 | DO820 | DO821 | DO828 |
| DO840 | DO880 | DO890 | DP820 | DP840 |
Detailed data
| Isolation | Individually isolated, channel-to-channel and to circuit common ground |
| Filter times (digital, selectable) | 2, 4, 8, 16 ms; analog filter 1 ms |
| Current limiting | Built in current limited sensor power |
| Rated insulation voltage | 50 V |
| Dielectric test voltage | 500 V a.c. |
| Power dissipation | 1.4 W |
| Current consumption +5 V Modulebus | Typ. 120 mA, Max. <150 mA |
| Current consumption +24 V external | Typ. 50 mA, Max. <70 mA |
Diagnostics
| Front LED’s | F(ault), R(un), W(arning), Channel 1-8 status and F(ault) |
| Supervision | Internal process supply Loop supervision |
Environment and certification
| CE mark | Yes |
| Electrical safety | IEC 61131-2, FM |
| Hazardous Location | C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2 |
| Marine certification | ABS, BV, DNV-GL, LR, RS, CCS |
| Protection rating | IP20 according to IEC 60529 |
| Corrosive atmosphere ISA-S71.04 | G3 |
| Climatic operating conditions | 0 to +55 °C (Storage -40 to +70 °C), RH=5 to 95 % no condensation, IEC/EN 61131-2 |
| Pollution degree | Degree 2, IEC 60664-1 |
| Mechanical operating conditions | IEC/EN 61131-2 |
| EMC | EN 61000-6-4, EN 61000-6-2 |
| Overvoltage categories | IEC/EN 60664-1, EN 50178 |
| Equipment class | Class I according to IEC 61140; (earth protected) |
| Max ambient temperature | 55 °C (131 °F), for vertical mounting in compact MTU 40 °C (104 °F) |
| RoHS compliance | EN 50581:2012 |
| WEEE compliance | DIRECTIVE/2012/19/EU |
Compability
| Use with MTU | TU890, TU891 |
| Keying code | AA |
Dimensions
| Height | 119 mm (4.7”) |
| Width | 45 mm (1.77”) |
| Depth | 102 mm (4.01”), 111 mm (4.37”) including connector |
| Weight | 0.2 kg (0.44 lbs.) |
Some ABB items sold by WTL:
Liability:
WTL is not liable for any personal injury or property damage
resulting from the use of this equipment. It is
buyer's responsibility as to the safe handling & operation of
this equipment and to verify equipment is
compliance to their machinery.
Our Brands:
| 【Honeywell】 | Module DCS/PLC/Transmitter |
| 【Emerson/Delta V】 | Module/ CT Motor & Drives |
| 【ABB】 | I/O Module |
| 【AB】 | Module&Touch Screen |
| 【Rosemount】 | Transmitter |
| 【Yokogawa】 | Transmitter |
| 【Yaskawa】 | Servo Drive&Servo Motor |
| 【GE/Fanuc】 | IC69 Series PLC |
| 【Mitsubishi】 | Servo Drive&Servo Motor |
(Modicon,SMC,SICK,NORGREN,Siemens,Ebmpapst etc.)
NEW Original ABB Module 3BSC690073R1 S800 I/O Digital Input Module DI890 PR:D
Inquiry Cart
0