Home /Other Tools /

24 V DC Output Module , Digital I/O Module ABB 3BSE050198R1 CPU Board PM866K01

24 V DC Output Module , Digital I/O Module ABB 3BSE050198R1 CPU Board PM866K01

Brand Name:ABB
Certification:CE
Model Number:PM866K01
Minimum Order Quantity:1
Delivery Time:In Stock
Payment Terms:T/T / Paypal
Contact Now

Add to Cart

Verified Supplier
Location: Shenzhen Guangdong China
Address: 23E BlockB,Lushan Building,Chunfeng Road,Luohu District,Shenzhen,518001,China
Supplier`s last login times: within 25 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details



ABB 3BSE050198R1 CPU Board PM866K01 Digital Input Output Module 24 V DC


Introduction

Digital Input Output Module PM866

The CPU board contains the microprocessor and RAM memory, a real-time clock, LED indicators, INIT push button, and a CompactFlash interface.

The base plate of the PM866 / PM866A controller has two RJ45 Ethernet ports (CN1, CN2) for connection to the Control Network, and two RJ45 serial ports (COM3, COM4). One of the serial ports (COM3) is an RS-232C port with modem control signals, whereas the other port (COM4) is isolated and used for the connection of a configuration tool. The controller supports CPU redundancy for higher availability (CPU, CEX-Bus, communication interfaces and S800 I/O Digital Input Output Module).

Simple DIN rail attachment / detachment procedures, using the unique slide & lock mechanism. All base plates are provided with a unique Ethernet address which provides every CPU with a hardware identity. The address can be found on the Ethernet address label attached to the TP830 base plate.


Features and benefits

  • Reliability and simple fault diagnosis procedures

  • Modularity, allowing for step-by-step expansion

  • IP20 Class protection without the requirement for enclosures

  • The controller Digital Input Output Module can be configured with 800xA control builder

  • The controller has full EMC certification

  • Sectioned CEX-Bus using a pair of BC810 / BC820

  • Hardware based on standards for optimum communication connectivity (Ethernet, PROFIBUS DP, etc.)

  • Built-in redundant Ethernet Communication ports


General Info

Article number

3BSE076939R1 (PM866AK01),
(3BSE050198R1 (PM866K01))

RedundancyYes
High IntegrityNo
Clock Frequency133 MHz
Performance, 1000 boolean operations0.09 ms
Performance0.09 ms
Memory64 MB
RAM available for application51.389 MB
Flash memory for storageYes


Detailed data

Processor typeMPC866
Switch over time in red. conf.Max 10 ms
No. of applications per controller32
No. of programs per application64
No. of diagrams per application128
No. of tasks per controller32
Number of different cycle times32
Cycle time per application programsDown to 1 ms
Flash PROM for firmware storage4 MB
Power supply24 V DC (19.2-30 V DC)
Power consumption +24 V typ/max210 / 360 mA
Power dissipation typ.5.1 W (8.6 W max)
Redundant power supply status inputYes
Built-in back-up batteryLithium, 3.6 V
Real-time clock stability100 ppm (approx. 1 h/year)
Clock synchronization1 ms between AC 800M controllers by CNCP protocol
Event queue in controller per OPC clientUp to 3000 events
AC 800M transm. speed to OPC server36-86 events/sec, 113-143 data messages/sec
Comm. modules on CEX bus12
Supply current on CEX busMax 2.4 A
I/O clusters on Modulebus with non-red. CPU1 electrical + 7 optical
I/O clusters on Modulebus with red. CPU0 eletrical + 7 optical
I/O capacity on ModulebusMax 96 (single PM866) or 84 (red. PM866) I/O modules
Modulebus scan rate0 - 100 ms (actual time depending on number of I/O modules)
Supply current on Electrical Modulebus24 V : max 1.0 A
5 V : max 1.5 A
Ethernet channels2
Ethernet interfaceEthernet (IEEE 802.3), 10 Mbit/s, RJ-45, female (8-pole)
Control Network protocolMMS (Manufacturing Message Service) and IAC (Inter Application Communication)
Recommended Control Network backbone100 Mbit/s switched Ethernet
RS-232C interface2 (one general, 1 for service tool)
RS-232C interface (COM3) (non red. only)RS-232C, 75-19 200 baud, RJ-45 female (8-pole), not opto isolated, full RTS-CTS support
RS-232C interface (COM4) (non red. only)RS-232C, 9 600 baud, RJ-45 female (8-pole), opto isolated, no RTS-CTS support



Digital Input Output Module​ PM866 Picture:



Some ABB items sold by WTL:



Good Service in WTL:

> We offer high quality, fast delivery, competitive price for ABB Input Output Module.

> Please send your RFQ to get the latest price.

> Normally, we will ship the items in 1-2 weeks after receive the payment.

> We can ship to you by UPS/DHL//EMS/Fedex. Please contact us and we will use your preferred ways.

> We have a large stock and the prices are variable, so sometimes the prices we post are not accurate. If needed, please contact us for specific prices.



Liability:

WTL is not liable for any personal injury or property damage resulting from the use of this equipment. It is

buyer's responsibility as to the safe handling & operation of this equipment and to verify equipment is

compliance to their machinery.




Our Brands:


China 24 V DC Output Module , Digital I/O Module ABB 3BSE050198R1 CPU Board PM866K01 supplier

24 V DC Output Module , Digital I/O Module ABB 3BSE050198R1 CPU Board PM866K01

Inquiry Cart 0