Beverage Water Purification System Drinking Production Line Machine
1) Adopts imported RO membrane, which can remove 99.7% inorganic
salt, heavy metal ion and completely get rid of colloid,
microbiology organic materials, germ, protozoa, pathogens,
bacteria, inorganic chemical and so on.
2) No need to add any chemicals, stable pure water quality, and no
pollution drained, low produce cost.
3) Equipped with pretreatment system, such as active carbon
absorption filter and PP sediment filter.
4) 304 stainless steel rack and pipe accessories connection.
5) Equipped with auto pressure protection system and on -line
6) Automatically and manually wash RO membrane. Also the design of
washing the RO membrane is by chemical solution (citric acid or
sodium hydroxide optional).
7) The lifespan of the whole system is long, operation simple, the
applicability is strong
The machine is integrated into a group,the assembly and
transportation are rather convenient. The structure of the machine
is reasonable, its shape is elegant and good looking.
Commonly used water treatment equipment includes: mechanical
filter, active carbon filter, masculine and feminine elements ionic
exchange column, pressure adding pump, precise filter, hollowed
super fiber filter, anti-filtration machine, Edi electronic salt
removing system, electric analyzing system, sterilizer, motor
controlling and box, these can be combined according to customer’s
demand or the local water condition.
RO WATER TREATMENT
As RO systems become more and more popular in the beverage
industry, the pretreatment filter is carefully used to protect the
RO membranes. Conventional treatment with multimedia filters and
cartridge filters will not remove these particles. There has been
another way from multimedia filters and toward continuous
microfiltration or ultrafiltration as a pretreatment to these
reverse osmosis systems.
RO water treatment, the raw water is tap water, first goes by
pre-treatment, then by RO treatment. Through those treatments, can
remove dissolving salt 99% and harmful materials, like particle,
colloid, organic impurities, heavy metal ions, bacteria, viruses
and heat source, etc. The system salt rejection rate gets 96-98%,
outlet water conductivity gets ≤ 10μ S/cm² .
|1||Multimedia filter||Sediment particles|
|3||Ultrafiltration Particles||some bacteria|
|4||Activated carbon filter||Chlorine and organic|
|5||Ultraviolet light(UV)||Bacteria and TOC|
|6||Reverse osmosis||TDS down|
1. Raw Water Storage Tank
2. Sand,Active Carbon,Sodium-ion,Fine Filter
1),Silica Sand Filter
2),Active Carbon Filter
5),Reverse osmosis filter
4),5um pp Filter element
3. RO System
RO membrane 4040*4 set
4. Ultraviolet Sterilizer
Working pressure 0.2--0.6Mpa
Water tem 25℃ Usage hour:8000H
5. Pure Water Storage Tank
SUS304,Storage tanks for water,
thickness 2mm,single layer
The two biggest selling types of bottled water are spring water and
purified water. And, although the end result may taste the same,
the processes of filtering are quite different. With spring water,
the source must be an actual spring. The label must say so. And,
the spring must be able to sustain the water production to make the
choice to bottle it from there an economical choice. Not that would
should be talking about beer in a water informational article, but
you often hear in commercials that the beer is made with water from
the Rocky Mountain springs. A typical spring water treatment
process includes a filtration system that generally runs in series
5-micron filtration to 0.2-micron filtration. After the filtration
process, the spring water is then usually treated with ozone to
disinfect and preserve the water in the bottle. By maintaining the
nature of the spring water, ozone is considered to be an acceptable
disinfectant. Ozone oxidizes bacteria and organic materials and,
over time, reverts back to oxygen.
Q: Are you a factory or trading company?
A:HQ Machinery is a factory who has rich experiences in All kinds
of bottle blow moulding machine, we offer OEM services in the last
over 20 years, and now we have our own brands and own designed machines for
Q: How long need to ship the machines after order
A: All machines can be ready and shipped in 20-60 days after order!
Q: What's the payment you prefer?
A: Our standard payment terms are T/T with 30% deposits and
balanced before shipment.
Q:Why should you choose our bottle blowing machine and liquid
production line ?
A:We have been specialized in filling and bottling machine for more
than20 years,and until now have exported mahcines to more than 180