China Categories
English
Home /Integrated Circuits /

Single Fiber SFP Optical Transceiver Module 10 Gigabit X2 3.5W Low Power Consumptionor

Single Fiber SFP Optical Transceiver Module 10 Gigabit X2 3.5W Low Power Consumptionor

Brand Name:NEWBRIDGE
Certification:FCC,CE
Model Number:X2-10G-1310
Minimum Order Quantity:1PC
Delivery Time:According to the quantiy and stocking , 3-4 working days after payment
Payment Terms:T/T , Western Union
Contact Now

Add to Cart

Active Member
Location: Shenzhen Guangdong China
Address: 4A B Building Zhuao Industrial Park Gushu Xixiang Baoan District Shenzhen,China,518126
Supplier`s last login times: within 24 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details

FEATURES

  • XAUI Electrical Interface: 4 Lanes @ 3.125Gbit/s
  • Uncooled 1310nm DFB laser and PIN receiver
  • Hot Z-Pluggable
  • SC-Duplex Optical Receptacle
  • MDIO, DOM Support
  • Power dissipation < 3.5W
  • Compliant to X2 MSA
  • Compliant to IEEE 802.3ae 10GBASE-LR Application
  • Case operating temperature: 0 to 70 °C

REFERENCE

IEEE 802.3ae as 10GBASE-LR, X2 MSA Release1.0B

GENERAL DESCRIPTION
10Gb/s X2 transceiver module NDX2-10G-LR is a hot pluggable in the Z-direction module that is usable in typical router line card applications, Storage, IP network and LAN and compliant to X2 MSA. The NDX2-10G-LR is a fully integrated 10.3Gbit/s optical transceiver module that consists of a 10.3Gbit/s optical transmitter and receiver, XAUI interface, Mux and De-mux with clock and data recovery(CDR).transceiver line uses an uncooled 1310nm DML Laser Diode to achieve 10km over standard single mode fiber as 10GBASE-LR of the IEEE 802.3ae.


.Optical Characteristics

Table 1. Optical Characteristics

No.ParametersSymbolsMin.Typ.Max.UnitNOTE
1Center WavelengthλC129013101330nm
2Signaling speed-10.3125-Gbit/s
3Signaling speed variation from nominal-100-+100ppm
4Average Optical PowerPout-5-0.5dBm
6Side Mode Suppression RatioSMSR30--dB
7Extinction RatioER3.5--dB
8Off Transmit PowerPoff---30dBm
9Receiver Sensitivity--14.4dBm
10Receiver OverloadRsat+0.5--dBm
11Optical Centre WavelengthλC12701610nm
12Los D-AssertROSd-18dBm
13Los AssertROSa-32
11Los Hysteresis0.5--dB

.Electrical Performance

Table2. Power Supply Characteristics

No.ParameterSymbolMin.Typ.Max.UnitNOTE
1Supply VoltageVCC13.1353.3003.465V
2Supply VoltageVCC21.1521.2001.248V
3Supply CurrentICC1--1.0A+3.3 V
4Supply CurrentICC2--1.7AAPS
5Power ConsumptionPDS--3.5W
6Power supply stabilization timeTDF--500ms
7Initialization TimeTINIT--5s
8RESET Assert TimeTRESET1--ms
9Hold Time after rising edge of RESETTHOLD500--ms

Table 3. XAUI Driver Characteristics

No.ParameterSymbolMin.Typ.Max.UnitNOTE
1Baud Rate-3.125-Gbit/s
2Baud Rate Tolerance-100-+100ppm
3Differential Amplitude800-1600mVPPAC, near-end value

Table4. 1.2V CMOS Interface Characteristics

No.ParameterSymbolMin.Typ.Max.UnitNOTE
1Input High VoltageVIH0.84-1.5V
2Input Low VoltageVIL-0.3-0.36V
3Input Pull-down CurrentIIn2040120µAVih=1.2V
4Output High VoltageVOH1.0--VPull-up=10k ohm to 1.2V
5Output Low VoltageVOL--0.2V
6Pull up ResistanceRLASI10-22k ohm
7CapacitanceCLASI--10pF
8Load CapacitanceCLoad--320pF

Table5. MDIO Bidirectional Interface Characteristics

No.ParameterSymbolMin.Typ.Max.UnitNOTE
1Input High VoltageVIHM0.84-1.5V
2Input Low VoltageVILM-0.3-0.36V
3Output High VoltageVOHM1.0-1.5V
4Output Low VoltageVOLM-0.3-0.2V
5Pull up ResistanceRMDIO200-Ohm1
6MDC min high/low timeTHM,TLM160--ns
7MDC Frequency1/TCKTBD-2.5MHz
8Setup timeTDIS10--ns
9Hold timeTDIH10--ns
10MDIO output delay after rising edge of MDCTPD0-300ns
12Input CapacitanceCi--10pF
13Bus LoadingCL--470pF

Note:1 The maximum value of RMDIO depends on bus loading(CL),input capacitance(Ci),and MDC frequency(1/TCK).


Fig 1-X2 Transponder Electrical Pad Layout


Table6. X2 Pin Configuration

Pin #SymbolI/OLogicDescription
1GNDISupplyElectrical ground
2GNDISupplyElectrical ground
3GNDISupplyElectrical ground
4RESERVED--Reserved
53.3 VISupplyPower
63.3 VISupplyPower
7APSISupplyAdaptive Power Supply
8APSISupplyAdaptive Power Supply
9LASIOOpen DrainLink Alarm Status Interrupt. 10-22k ohm pull up on host.
10RESETI1.2V CMOSTX OFF when MDIO RESET
11VEND SPECIFIC--Vendor Specific Pin. Leave unconnected.
12TX ON/OFFI1.2V CMOSTransmitter ON/OFF
13RESERVED--Reserved
14MOD DETECTO-Pulled low inside module through 1k ohm.
15VEND SPECIFIC--Vendor Specific Pin. Leave unconnected.
16VEND SPECIFIC--Vendor Specific Pin. Leave unconnected.
17MDIOI/OOpen DrainManagement Data IO
18MDCI1.2V CMOSManagement Data Clock
19PRTAD4I1.2V CMOSPort Address bit 4 (Low=0)
20PRTAD3I1.2V CMOSPort Address bit 3 (Low=0)
21PRTAD2I1.2V CMOSPort Address bit 2 (Low=0)
22PRTAD1I1.2V CMOSPort Address bit 1 (Low=0)
23PRTAD0I1.2V CMOSPort Address bit 0 (Low=0)
24VEND SPECIFIC--Vendor Specific Pin. Leave unconnected.
25APS SETO-Feedback output for APS
26RESERVED--Reserved for Avalanche Photodiode use.
27APS SENSEOAnalogAPS Sense Connection
28APSISupplyAdaptive Power Supply
29APSISupplyAdaptive Power Supply
303.3 VISupplyPower
313.3 VISupplyPower
32RESERVED--Reserved
33GNDISupplyElectrical Ground
34GNDISupplyElectrical Ground
35GNDISupplyElectrical Ground
36GNDISupplyElectrical Ground
37GNDISupplyElectrical Ground
38RESERVED--Reserved
39RESERVED--Reserved
40GNDISupplyElectrical Ground
41RX LANE 0+OACModule XAUI Output Lane 0+
42RX LANE 0-OACModule XAUI Output Lane 0-
43GNDISupplyElectrical Ground
44RX LANE 1+OACModule XAUI Output Lane 1+
45RX LANE 1-OACModule XAUI Output Lane 1-
46GNDISupplyElectrical Ground
47RX LANE 2+OACModule XAUI Output Lane 2+
48RX LANE 2-OACModule XAUI Output Lane 2-
49GNDISupplyElectrical Ground
50RX LANE 3+OACModule XAUI Output Lane 3+
51RX LANE 3-OACModule XAUI Output Lane 3-
52GNDISupplyElectrical Ground
53GNDISupplyElectrical Ground
54GNDISupplyElectrical Ground
55TX LANE 0+IACModule XAUI Input Lane 0+
56TX LANE 0-IACModule XAUI Input Lane 0-
57GNDISupplyElectrical Ground
58TX LANE 1+IACModule XAUI Input Lane 1+
59TX LANE 1-IACModule XAUI Input Lane 1-
60GNDISupplyElectrical Ground
61TX LANE 2+IACModule XAUI Input Lane 2+
62TX LANE 2-IACModule XAUI Input Lane 2-
63GNDISupplyElectrical Ground
64TX LANE 3+IACModule XAUI Input Lane 3+
65TX LANE 3-IACModule XAUI Input Lane 3-
66GNDISupplyElectrical Ground
67RESERVED--Reserved
68RESERVED--Reserved
69GNDISupplyElectrical Ground
70GNDISupplyElectrical Ground

Note: Case is connected to electrical ground in the module.


.Register Definition

Device Address (Dec) Register Address (Hex)PMA/PMD 1PCS 3PHY XS 4
0x0000PMA/PMD Control1PCS Control1PHY XS Control1
0x0001PMA/PMD Status1PCS Status1PHY XS Status1
0x0002PMA/PMD Device Identifier0PCS Device Identifier0PHY XS Device Identifier0
0x0003PMA/PMD Device Identifier1PCS Device Identifier1PHY XS Device Identifier1
0x0004PMA/PMD Speed AbilityPCS Speed AbilityPHY XS Speed Ability
0x0005PMA/PMD Device in Package1PCS Device in Package1PHY XS Device in Package1
0x0006PMA/PMD Device in Package2PCS Device in Package2PHY XS Device in Package2
0x000710G PMA/PMD Control2PCS Control2Reserved
0x000810G PMA/PMD Status2PCS Status2PHY XS Status2
0x000910G PMD Transmit DisableReservedReserved
0x000A10G PMD Receive Signal O.K.ReservedReserved
0x000EPackage Identifier0ReservedReserved
0x000FPackage Identifier1ReservedReserved
0x0018ReservedReserved10G PHY XGXS Lane Status
0x0019ReservedReserved10G PHY XGXS Test Control
0x0020Reserved10GBASE-R PCS Status1Reserved
0x0021Reserved10GBASE-R PCS Status2Reserved
0x0022Reserved10GBASE-R PCS Test pattern Seed A0Reserved
0x0023Reserved10GBASE-R PCS Test pattern Seed A1Reserved
0x0024Reserved10GBASE-R PCS Test pattern Seed A2Reserved
0x0025Reserved10GBASE-R PCS Test pattern Seed A3Reserved
0x0026Reserved10GBASE-R PCS Test pattern Seed B0Reserved
0x0027Reserved10GBASE-R PCS Test pattern Seed B1Reserved
0x0028Reserved10GBASE-R PCS Test pattern Seed B2Reserved
0x0029Reserved10GBASE-R PCS Test pattern Seed B3Reserved
0x002AReserved10GBASE-R PCS Test pattern ControlReserved
0x002BReserved10GBASE-R PCS Test pattern Error counterReserved
0x8000NVR Control/Status (X2 Register)Reserved
0x8007 - 0x807DNVR (X2 Register)Reserved
0x807E- 0x80ADCustomer AREAReserved
0x80AE - 0x8106SH Specific Area(X2 Register)Reserved
0x9000RX_ALARM Control (X2 Register)Reserved
0x9001TX_ALARM Control (X2 Register)Reserved
0x9002LASI Control (X2 Register)Reserved
0x9003RX_ALARM Status (X2 Register)Reserved
0x9004TX_ALARM Status (X2 Register)Reserved
0x9005LASI Status (X2 Register)Reserved
0x9006TX_FLAG Control BitsReserved
0x9007RX_FLAG Control BitsReserved
0xA000 - 0xA027Alarm and Warning ThresholdsReserved
0xA060 - 0xA069Digital Optical Monitoring InterfaceReserved
0xA06FDOM Capability - ExtendedReserved
0xA070TX_ALARM_FLAG BitsReserved
0xA071RX_ALARM_FLAG BitsReserved
0xA074TX_WARNING_FLAG BitsReserved
0xA075RX_WARNING_FLAG BitsReserved
0xA100Optional Digital Optical Monitoring (DOM) Control/StatusReserved

. Regulatory Compliance

FeatureReferencePerformance
Electrostatic discharge(ESD)IEC/EN 61000-4-2Compatible with standards
Electromagnetic Interference (EMI)FCC Part 15 Class B EN 55022 Class B (CISPR 22A)Compatible with standards
Laser Eye SafetyFDA 21CFR 1040.10, 1040.11 IEC/EN 60825-1,2Class 1 laser product
ROHS2002/95/ECCompatible with standards
EMCEN61000-3Compatible with standards

Appendix A. Document Revision

Version No.DateDescription
1.02010-09-01Preliminary datasheet
2.02011-09-10Update format and company’s logo

China Single Fiber SFP Optical Transceiver Module 10 Gigabit X2 3.5W Low Power Consumptionor supplier

Single Fiber SFP Optical Transceiver Module 10 Gigabit X2 3.5W Low Power Consumptionor

Inquiry Cart 0