Add to Cart
Carbon Steel Square Drive Round Washer Head Kreg Screw for Wood with T17 cut
|
Product Description
Square-drive prevents bit slipping while driving
When you’re building a project, there are few things more
aggravating than having your driver bit slip, spin, and strip out
the screw head. All too often, that leaves you with a screw you
can’t drive the rest of the way in or back out, so you’re stuck.
Kreg Screws have a square-drive head that works with a #2 square
drive bit to drive screws without the driver slipping. That means
you can drive every screw completely, quickly, and with confidence.
Flat-bottom head seats firmly in pocket hole
Ordinary woodworking screws and drywall screws have a head with a
conical shape on the underside. The head on a Kreg Screw is
perfectly flat on the bottom. That flat shape mates perfectly with
the flat pocket in a Kreg pocket hole. So, when you drive a Kreg
Screw into the pocket hole, it the force is applied straight toward
the screw tip, presses evenly on the pocket, and holds the joint
tightly together, without deforming the pocket, which could split
the wood.
Smooth shank draws the joint together
The threads on a Kreg Screw stop partway up the screw shank, which
leaves a smooth area below the screw head. It’s there for good
reason. When you drive the screw in, the threaded portion grabs
into the workpiece you’re attaching to, pulling the screw in. The
other piece glides freely over the unthreaded part of the screw,
allowing that piece to pull tightly against the mating piece —
without interference from unnecessary threads.
Case-hardened steel won’t bend, snap, or break
Screws made from inferior materials are soft, so they can easily
twist and break due to torque forces as you drive them in. Steel
Kreg Screws are case hardened — a process forms a tough outer shell
(or case) to make the screw tough, but keeps the core softer to
prevent the screw from becoming brittle. That means you get the
best of both worlds: a strong screw that won’t snap.
Self-tapping tip drills its own hole without splitting
When you assemble a joint with Kreg Screws, the pocket hole is all
you have to drill. There’s no need for a pilot hole in the mating
piece. That’s because Kreg Screws have a self-tapping tip that
“drills” its own hole, so the screw drives in quickly and easily
without splitting the wood, like ordinary screws often do. This
makes assembly much easier, too, since you don’t have to worry
about whether your pilot hole will line up correctly.
Kreg Screws are available in two different thread types: coarse thread and fine thread. Why? Because different woods have different screw-holding abilities.
Woods like pine and spruce, for example (known as softwoods), are
soft and not very dense. That means they need a screw with deep,
aggressive threads that will bite into those soft fibers. Coarse
Kreg Screws work great for these woods, and are also the preferred
choice for sheet goods like plywood and MDF.
Coarse-thread for softwoods and sheet goods: Pine, Cedar, Fir, Spruce, Poplar, Aspen, Basswood, Butternut, Plywood, Particle Board, MDF, Melamine
Hardwoods like oak, maple, and cherry, on the other hand, are too
hard and dense for coarse-thread screws. The aggressive threads
tend to tear the wood fibers, resulting in splits in your wood. For
these hardwoods, choose Fine Kreg Screws. The threads are less
aggressive, but there are more of them to ensure great holding
power without splitting.
Fine-thread for hardwoods: Oak, Maple, Cherry, Birch, Ash, Walnut, Mahogany, Hickory
Company Introduction
Ningbo Oukailuo Hardware Co., Ltd. was founded in 1999 and is a
leading fastener manufacturer. Company passed ISO9001:2015 quality
management system certification, and has ROHS, SGS certificate. Our
main export markets are North America, Europe, Oceania, Korea, etc.
We have our own heat treatment shop, electroplating shop, Ruspert
workshop. The heat treatment process is very important for product
hardness, and our technology can ensure it. Electroplating includes
galvanization, yellow zinc, black zinc, and green zinc. All
galvanization meets ROHS. Salt spray time can be up to 96 hours.
Ruspert can do most of the colors. The salt spray time can be 500
hours and 1000 hours.
OuKaiLuo have over 19 years experience inventory management,
managing a growing number of customer production lines on-site to
ensure ‘just-in-time’ delivery. We offer many variations of Direct
Line Feed management to suit individual needs.
FAQ
Q: How about your price?
A: High quality products with reasonable price. Please give me a inquire, I will quoted you a price for you refer at once.
Q: How do you control your quality?
A: We have our in-house QC daily and hire third party for randomly inspection.
Q: Could you provide free samples?
A: For our regular products, we offer free samples. For customized bolts, tooling and moulding charges need. All free samples not including its courier charge.
Q: Do you accept small order?
A: Sure, we can accept any orders, we keep lots of stock for ALL STAINLESS STEEL FASTENER, CARBON STEEL NUT AND PART BOLT,Like hex weld nut, cage nut, wing nut, square weld nut,cap nut, hex nut,flange nut.Metric 8.8Grade,10.9Grade 12.9Grade Hex bolt and Hex Socket cap screw,Part ASME Hex cap screw.
Q: How about your delivery time?
A: General speaking, if the goods is in stock, we can delivery them with 2-5days, If the quantity is 1-2container, we can give you with 18-25days,if the quantity is more than 2 container and you are very urgent, we can let factory priority produce your goods.
Q: What is your terms of payment ?
A: We can accept T/T,L/C for general order ,Paypal and Western union for small order or samples order.
If you are interested in chipboard screw, Please do not hesitate to email us or call us. Our professional team will assit you to purchased the quality products.