Add to Cart
HJF-1000 injection molding machine with servo
Characteristic:
» Linear guide for injection carriage could lower the wear and
tear, and make the injection control precise and stable. (Optional)
» T slot mould platen
» Apply international famous brand electric & hydraulic
components.
» The injection base is modularized and could choose different
matching type in accordance with injection volume.
» Smooth the mold opening speed curve design, and add the speed
command to reduce the machine vibration.
» It has excellent precision control with the weight error of
finished product is about 0.7% to 0.4%.
» Adopted servo power-saving system which could reduce the energy
consumption 40%- 70%.
Servo Controller Part:
1. High Precise Control The servo system can control the machine's
pressure, speed & location precisely, make sure that the error
of accurate repeatability precision for the shot measurement is
<0.3%
2. High sensitive response Because the motor vector is matched with
the controller accurately, it only takes 0.5sec. inputing the
number from 0 to max. Compared with other traditional hydraulic
injection molding machine, HJ series is more faster in speed with
shorter cycle time and high efficient in production
3. Low noise Compared with traditional fixed pump & variable
pump system, the noise is 1/10 lower under normal circumstance,
more suitable for sealed dustless workshop
4. Energy Saving Overall efficiency is 10% more & driving
capacity is 18% more than common machine. This series can save
40-80% energy, and achieve first-class energy efficency
5. Water cooling saving The system condition prevent high pressure
uploading without any power output, leads to the water cooling
saving
G plastic parts injection machine features:
→ bigger space between tie-bars
→ central-clamping structure
→ famous components
→ energy saving with servo motor
→ low noise, fast respons
→ high precision, Stable and super long life
→ T-Slot Platen
→ abundant Spare Parts
→ better price
SPECIFICATION | HJF-1000 | |||||||
A | B | C | D | |||||
Screw diameter | mm | 95 | 105 | 115 | 125 | |||
Screw L/D Ratio | L/D | 23 | 22 | 20 | 18.6 | |||
Shot size(theoretical) | cm³ | 3613 | 4413 | 5294 | 6255 | |||
Injection weight(PS) | g | 3251 | 3972 | 4765 | 5629 | |||
Injection pressure | Mpa | 210 | 162 | 133 | 120 | |||
Injection rate | g/s | 580 | 708 | 850 | 930 | |||
Screw Speed | rpm | 115 | ||||||
Clamp tonnage | KN | 10000 | ||||||
Opening stroke | mm | 1100 | ||||||
Space between the tie bars | mm | 1120*1120 | ||||||
Max.Mold Height | mm | 1100 | ||||||
Min.Mold Height | mm | 500 | ||||||
Ejector stroke | mm | 350 | ||||||
Ejector tonnage | KN | 200 | ||||||
Max.pump pressure | Mpa | 16 | ||||||
Pump motor power | KW | 45+45 | ||||||
Heater power | KW | 58 | ||||||
Machine dimension(L*W*H) | M | 12*2.8*3.14 | ||||||
Machine weight | T | 45 | ||||||
Oil tank capacity | L | 1800 |
Haijiang Machinery Main Configuration
Controller | Arcuchi/Porchesion(50-290T)(China) |
Techmation(360-3000T)(Taiwan) | |
Vane pump | Albert(USA) |
Proportional valve | HJK series Northman(TAIWAN) |
HJK series Northman(TAIWAN) or TOKIMEC(Japan) | |
Directional valve | HNC(TAIWAN) or YUKEN(Japan) |
Electric motor | Dongguan(Guangdong) |
contactor | Mager(50-290T)/Schneider(China)(360-3000T) |
High pressure hose | Fute(Ningbo) |
Five-star hydrauhu | Dandun(China)STAFFA(UK) |
Air breaker | LS(Korea) |
Thermal overland relay | Schneider(China) |
Limit switch | Omoron(Japan) |
Lubrication pump | Automatic |
Servo motor | SUMITOMO(Japan) |
Servo pump | DELTA(Taiwan) |
Servo sensor | ASHCROFT(Germany) |
SPARE PARTS(FOR FREE)
1.mold clamping with bolts:8pcs | 2.Nozzle:1pc |
3.Toolbox:1set | 4.heating ring:2pcs |
5.lubrication oil:1 bucket | 6.limit switch:2pcs |
7.hexagon wrench:1set | 8.thermocouple:2pcs |
9.seal ring:2pcs | 10.machine foot pad:6pcs |
11.vise:1pc | 12.power socket for auxiliary machine:2pcs |
13.wrench:1pc | 14.screwdriver:2pcs |