Add to Cart
Vertical Heavy Duty Unwinder, Straightening Equipment, Ruihui Roller Feeder Manufacturer
Lightweight material rack performance and characteristics
The lightweight material frame can be used as a vertical material
rack, which can be used for the discharge of light material coils,
and can also be used for the winding of thin sheet scraps. However,
the inner diameter, outer diameter and load capacity of the
applicable materials are strictly limited. If this limit is
exceeded, a heavy material rack is required.
Performance and characteristics of heavy material racks
The heavy-duty material frame is one of the most used ones for
unloading and unwinding in the stamping industry. It is affordable,
has a wide range of applications, and is highly customizable. It is
suitable for most press processing automation applications.
Performance and characteristics of hydraulic heavy material rack
The hydraulic heavy-duty material frame is an upgraded and improved
type of heavy-duty material frame, which changes the manual
heavy-duty material frame hand-operated inner diameter expansion
mode to the oil pressure automatic expansion mode, which greatly
reduces the labor intensity, and is mainly used for heavy material
coils. Unwinding, usually the weight of the coil exceeds 2T. Ruihui
Machinery recommends that the stamping customer choose this rack.
Performance and characteristics of double-head material rack
The double-head material frame is an unwinding device developed and
manufactured to improve the efficiency of stamping production. It
has two vertical expansion and contraction reels to carry the roll,
which can be used for another roll while unwinding and unloading
one roll. The feeding of the barrel maximizes the saving of the
refueling downtime. At present, it is mainly used for the efficient
processing of silicon steel sheets and EI sheets.
Specification:
Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
Power(V) | 3 Phase 220V/380V/50HZ | |||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
tock Thicknees (mm) | Stock Width (mm) | |||
0.3 | 400 | 500 | 600 | 800 |
0.4 | ||||
0.6 | ||||
0.8 | ||||
1.0 | ||||
1.2 | ||||
1.4 | ||||
1.6 | 470 | 470 | ||
1.8 | 400 | 400 | ||
2.0 | 360 | 360 | ||
2.3 | 300 | 300 | 300 | 300 |
2.5 | 230 | 230 | 230 | 230 |
2.8 | 150 | 150 | 150 | 150 |
3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi