Add to Cart
Customized Wooden Acoustic Movable Partitions Wall For Artgallery And Office
Specifications
Technical Parameter for Partition Panel | Panel Width | 23 - 48 inch |
Panel height | 78 - 156mm | |
Sound proof | 32 - 38 dB | |
Operation | Manual | |
Frame | Aluminium | |
Vertical profile | Anodised aluminium profiles with integrated magnetic strip and sealing edges on the inside | |
Finish options | Fabric, veneer, HPL melamine, vinyl, carpet, customers own material, Bare finish | |
Base options | Plywood, Gypsum, steel, MDF | |
Max width | Unlimited | |
Panel weight | 25 - 40 kg / sq | |
Pass door selection | door | Single dor or double door |
Seals | Top | Manual |
bottom | Manual |
Track:
The tracks are made from extruded 6063 – T6 anodized aluminum. The
track housing shall utilize grooves and interlocking steel pins for
positive alignment of adjacent track sections, and shall be
reinforced overhead by drop rod brackets. Aluminum track housing
shall include an integral nut slot to accept a hardened square nut
for attaching each drop rod bracket to the top of the track.
Trolley:
BUNGE Centre/ Side /Remote stacking system with a Two wheeled nylon
trolley made with the base Material of POM 45 tempered steel shall
be used as per approved stacking method.
Aluminum trim: The panel trims will be standard series with exposed
Aluminum trims of 15mm thickness finished in 6063 – T6 Anodized
Aluminum shall be used.
Seals:
Vinyl seal of butane rubber will be used as top and bottom and as
well as closure seals for the operable wall system. Retractable
seal drop will be 23mm.
Acoustic insulation Material: Rockwool sound absorption glass fiber
shall be used.
Magnetic Strip: Ferrite plastic magnetic material will be used in
between aluminum profiles to enhance acoustic performance of the
wall.
Successful Case of Customized Wooden Acoustic Movable Partitions Wall